Hey_wayne Posted April 21, 2016 Share Posted April 21, 2016 I'm having trouble getting clarity on the Dean G mod for these speakers. Google searches pull up youtube videos where people claim they have better mods than the Dean G, but based on what I read, the Dean G mod is what I need. Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted April 21, 2016 Share Posted April 21, 2016 I'm having trouble getting clarity on the Dean G mod for these speakers. Google searches pull up youtube videos where people claim they have better mods than the Dean G, but based on what I read, the Dean G mod is what I need. Do you want the full blown mod or just the resistor mod? Quote Link to comment Share on other sites More sharing options...
Hey_wayne Posted April 21, 2016 Author Share Posted April 21, 2016 I'm having trouble getting clarity on the Dean G mod for these speakers. Google searches pull up youtube videos where people claim they have better mods than the Dean G, but based on what I read, the Dean G mod is what I need. Do you want the full blown mod or just the resistor mod? Probably could only afford the resistor mod, but I'd be interested to hear how to do both. Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted April 21, 2016 Share Posted April 21, 2016 The resistor mod is easy and cheap. It also gets you about 75% of the way to the full blown mod. You'll definitely notice a difference. I think I have Deans directions somewhere. I'll try to find them and copy and paste it for you here in this thread. Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted April 21, 2016 Share Posted April 21, 2016 Found it. I have pictures of when I did mine somewhere as well. This is a copy and paste from Dean. There is a section of the RF-7 network called "a notch circuit". It is designed to reduce a resonant peak in the driver (tweeter). Klipsch reduces it, but does not flatten it. This is why the RF-7, as wonderful as it is -- doesn't always sound that good with music. Paralleling the 10 ohm resistor with the 2 ohm resistor takes it down to 1.66 ohms -- which really helps to smooth out the top end. Like I said in the post, not as refined as the full upgrade, but helpful nonetheless. You can use any kind of 10 ohm resistor you want, but it should be rated for at least 10 watts. Do you know how to solder? Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted April 21, 2016 Share Posted April 21, 2016 (edited) Here's the picture of the additional resistor. I hot glued it to the resistor next to it, bent the leads around the board and soldered them together. You can see that it hangs slightly off the board. That was the easiest way for me. This is a picture of the RF-7. The RC-7 can be done as well but is in a different location. EDIT: click to enlarge the picture. Edited April 21, 2016 by CECAA850 Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted April 21, 2016 Share Posted April 21, 2016 Same crossover from the side. Quote Link to comment Share on other sites More sharing options...
Hey_wayne Posted April 21, 2016 Author Share Posted April 21, 2016 (edited) Found it. I have pictures of when I did mine somewhere as well. This is a copy and paste from Dean. There is a section of the RF-7 network called "a notch circuit". It is designed to reduce a resonant peak in the driver (tweeter). Klipsch reduces it, but does not flatten it. This is why the RF-7, as wonderful as it is -- doesn't always sound that good with music. Paralleling the 10 ohm resistor with the 2 ohm resistor takes it down to 1.66 ohms -- which really helps to smooth out the top end. Like I said in the post, not as refined as the full upgrade, but helpful nonetheless. You can use any kind of 10 ohm resistor you want, but it should be rated for at least 10 watts. Do you know how to solder? Very helpful, thank you for the pictures. How hard should it be to solder for someone who's never attempted such thing? I do not know how to solder and wouldn't want to risk damage. By the way, it seems that you just solder the 10ohm resistor to the already connected 2 ohm resistor? Any idea the easiest way to get to the crossover? Edited April 21, 2016 by Hey_wayne Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted April 21, 2016 Share Posted April 21, 2016 How hard should it be to solder for someone who's never attempted such thing? Impossible for me to answer. You can get the soldering equipment and practice on scrap wire and such. I know you don't know me from Adam, but if you bought the stuff and sent it all to me, I'd be happy to do it for you and send it back. It doesn't take very long to do. If you're going to have audio as a hobby you really need to learn to solder. You'll do it more than you think. There's plenty of you tube videos to watch to help you learn. Quote Link to comment Share on other sites More sharing options...
Hey_wayne Posted April 21, 2016 Author Share Posted April 21, 2016 How hard should it be to solder for someone who's never attempted such thing? Impossible for me to answer. You can get the soldering equipment and practice on scrap wire and such. I know you don't know me from Adam, but if you bought the stuff and sent it all to me, I'd be happy to do it for you and send it back. It doesn't take very long to do. If you're going to have audio as a hobby you really need to learn to solder. You'll do it more than you think. There's plenty of you tube videos to watch to help you learn. This is a good community, with 24k posts I know you're not trying to steal crossovers from someone looking for help. I may look in to trying to do this myself, but I am very interesting in getting the mod done. Thank you for all of your help. Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted April 21, 2016 Share Posted April 21, 2016 Not a problem. Post here or PM me if you have any questions. Quote Link to comment Share on other sites More sharing options...
Hey_wayne Posted April 21, 2016 Author Share Posted April 21, 2016 Not a problem. Post here or PM me if you have any questions. Sure thing. Last question, if you're familiar, is what is the best way get to the crossover? Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted April 21, 2016 Share Posted April 21, 2016 Not a problem. Post here or PM me if you have any questions. Sure thing. Last question, if you're familiar, is what is the best way get to the crossover? The crossover is on the back of the terminal cup. There are 4 torx head bolts that hold it on. You will however need to remove the tweeter horn to disconnect the wires on it and the top woofer. Be sure you pay attention to what color wires go on each particular terminal. The tweeter is deceptively heavy. Sometimes it's easier to remove it with the speaker laying on it's back so you don't drop it. Quote Link to comment Share on other sites More sharing options...
wilbucd Posted December 17, 2018 Share Posted December 17, 2018 Hey Folks....I need to resurrect this post as I just ordered the Dayton 10 Ohm resistors mentioned above. Just to be clear.... This same 10 Ohm resister is used in parallel with the 2 Ohm resister on both the RF7 and the RC7. Am I correct? Quote Link to comment Share on other sites More sharing options...
Deang Posted December 17, 2018 Share Posted December 17, 2018 Yes. Quote Link to comment Share on other sites More sharing options...
perryleros Posted June 16, 2023 Share Posted June 16, 2023 I know it's many years later but i was not able to find clear information on what exact parts are required and instructions on doing the full DeanG mod on the RC7. If someone can point me in the right direction I would greatly appreciate it. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.