Moderators Youthman Posted August 3, 2017 Moderators Share Posted August 3, 2017 The manual of your Monoprice Tube Amp doesn't state anything about being able to bridge it so I'm guessing it's not designed to do so. https://www.monoprice.com/product?p_id=13194 I personally would not try it with your amp. Quote Link to comment Share on other sites More sharing options...
zackolesouth Posted August 3, 2017 Author Share Posted August 3, 2017 Ok thank you everyone Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Moderators Youthman Posted August 3, 2017 Moderators Share Posted August 3, 2017 1 minute ago, wvu80 said: The only way you can bridge your amp is if your manual specifically tells you that you can and gives you instructions on how to do that. Exactly. Quote Link to comment Share on other sites More sharing options...
USNRET Posted August 3, 2017 Share Posted August 3, 2017 and 25 watts into a Heresy would be quite enough; I have used 6 Quote Link to comment Share on other sites More sharing options...
Moderators Youthman Posted August 3, 2017 Moderators Share Posted August 3, 2017 Just curious what is the main reason you want to bridge the amp? Typically bridging an amp increases distortion significantly. I would think you would want to have as clean of a signal going to the speakers as possible. Quote Link to comment Share on other sites More sharing options...
The History Kid Posted August 3, 2017 Share Posted August 3, 2017 1 hour ago, zackolesouth said: rca to aux Someone might correct me if I'm wrong, but generally this is not advised onto a power amp. You'll want to make sure that whatever device you're using has a volume toggle, and if I'm not mistaken how the conductors are lined up on the ends of the 3.5 mm jack tends to add noise into the line. That last bit, I'm not 100% on, but you'll want to use a bit of caution with that. It's designed to receive a signal from a preamp, not a phone. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.