MJSNet Posted December 31, 2018 Share Posted December 31, 2018 Hello everyone! Been a Klipsch user for many years (two K-Horns), but this is my first forum post. I just got The Three and two Gates. I would like to connect to "The Three" via Bluetooth to play music and have that stream to the "Gates" so it can be played throughout the house. I managed to get it so that if I play music on the Gate, I can stream to The Three, but not the other way around. Is this possible? I ask because my only Bluetooth receiver in the system is "The Three". I would think that since the Gate has inputs and outputs, it was designed for multi-purpose. Anyone have any ideas on how I can play BT connected music to The Three and have it send it to the "Gate"? Need more info or a diagram? I would be happy to oblige. :) Quote Link to comment Share on other sites More sharing options...
MJSNet Posted December 31, 2018 Author Share Posted December 31, 2018 I guess I should add that the Bluetooth source is from another device connected to the BT on The Three. It is not running through the Klipsch Stream app. Aux input on The Three (connected to the output jack of the device) accomplishes what I want, but I would rather connect the device via BT so it is not tethered via a cable to the Aux. The Klipsch app only has selections for Aux, Line In, and Phono when configuring streaming from the Three's sources... BT is not a selection option. It seems this should be a fairly simple task. Thoughts and ideas anyone? I realize I can stream from the Klipsch app and connect via BT to do this, but I have BT sources that don't support the Klipsch app. Thanks! Quote Link to comment Share on other sites More sharing options...
Tarheel Posted December 31, 2018 Share Posted December 31, 2018 I can't help you other than to say welcome to the forum! Quote Link to comment Share on other sites More sharing options...
seajay Posted April 20, 2019 Share Posted April 20, 2019 The Three is not a 'source' for Play-Fi. Only Gate, PowerGate, and two of the soundbars (RSB-8, RSB-11) provide this feature. Quote Link to comment Share on other sites More sharing options...
glens Posted April 20, 2019 Share Posted April 20, 2019 I believe Bluetooth is only an input on the 3, too, not an output. Quote Link to comment Share on other sites More sharing options...
glens Posted April 20, 2019 Share Posted April 20, 2019 Go to Walmart and get a cheap little prepaid phone. You don't have to even put the SIM card in it, much less activate it. You can use it like a little tablet. You can plug it into the Gate and bluetooth to it, thus to the Gate, thus to everything else. I got a sweet Moto E4 for $40 a couple years ago and use it for anything I want which doesn't require the phone network. Quote Link to comment Share on other sites More sharing options...
CraigG Posted April 23, 2019 Share Posted April 23, 2019 I'm fairly certain that B On 4/20/2019 at 6:14 PM, seajay said: The Three is not a 'source' for Play-Fi. Only Gate, PowerGate, and two of the soundbars (RSB-8, RSB-11) provide this feature. Yes it is. Play-Fi's Line-In broadcast is supported on: Klipsch Gate receiver Klipsch PowerGate amplifier Klipsch RSB-8 sound bar Klipsch RSB-14 sound bar Klipsch The Capitol Three speaker Klipsch The Three speaker https://play-fi.com/faq/entry/stream-a-line-in-audio-input Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.