billybobg Posted April 20 Share Posted April 20 Who's had a wife use their LaScala as a plant holder? I'm going to add a thin veneer over the top of my speaker. The top was ruined and had mold. I tried to take it out, but the wood bleached out to much. I expect the veneer, even after adding the finish, to be lighter. Anyone have experience to get the new veneer to match? The speakers are 1980 LaScalas with clear birch, what I understand is a lacquer finish. Quote Link to comment Share on other sites More sharing options...
Woofers and Tweeters Posted April 20 Share Posted April 20 Are you sure that the veneer can't be saved? If the veneer isn't separated from the other layers, an oil or a stain might bring them back to life. Quote Link to comment Share on other sites More sharing options...
billybobg Posted April 20 Author Share Posted April 20 Picture doesn't do justice to how bad it is. Bleaching really 'worked'. I've tried some stain, but just doesn't look good. Quote Link to comment Share on other sites More sharing options...
Woofers and Tweeters Posted April 20 Share Posted April 20 I used Bar Keepers Friend to remove water stains. I treated the whole surface, not just the stained areas. Have you sanded any of it? Quote Link to comment Share on other sites More sharing options...
OO1 Posted April 20 Share Posted April 20 8 hours ago, billybobg said: Picture doesn't do justice to how bad it is. Bleaching really 'worked'. I've tried some stain, but just doesn't look good. Trade Secret https://tradesecret.ca/white-ring-remover/ removes water marks without damaging the original wood finish Quote Link to comment Share on other sites More sharing options...
billybobg Posted April 20 Author Share Posted April 20 Yes, but not stripped totally. Quote Link to comment Share on other sites More sharing options...
Marvel Posted April 20 Share Posted April 20 6 hours ago, Woofers and Tweeters said: I used Bar Keepers Friend to remove water stains. I treated the whole surface, not just the stained areas. Have you sanded any of it? That would surely get a more even look that could then be refinished. Quote Link to comment Share on other sites More sharing options...
Woofers and Tweeters Posted April 20 Share Posted April 20 9 hours ago, billybobg said: Yes, but not stripped totally. I use a 2:1 BKF with water to make a paste. I apply it by rubbing it on and into the wood as if trying to clean a stain. Wipe it off with a barely damp cloth. It might take a few tries to get there, but I have cleaned water stains from a few cabinets. I would strip, sand, and prep all surfaces and reapply a new finish to both cabinets. I was able to remove the water stains from these by sanding and no acid (BKF). I have had some that sanding would not have worked. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.