Jump to content

HELP new cd player distortion!


powdermnky007

Recommended Posts

Just got in my decware 685. http://www.decware.com/SACD/sacd.htm

It's stock outputs are 2v, which sound fine.

It's high quality outputs are 3.5v which distort.

book says 'this is a high impedance output meaning you don't want to use passive volume controls unless they are 100k ohms'

my preamp is a mapletree ultra 4a that nosValves modded. I've been over the wire diagrams, which don't mean much to me. I saw 100k ohms on there somewhere it seems. Is 3.5v input to the mapletree too much?

The tube that it came with is a 'JJ Electronic' E88CC tube. It uses a dual triode (12AU7) and may be rolled with 12AT7 and 12AX7 tubes as well. Not sure what an AT7 is, but I know AU7 has lower gain than an AX7, so i need to stay way from the AX! I'm not sure what an E88CC is... maybe they dropped the wrong tube in the box.

THANKS!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...