LarryC Posted January 8, 2005 Share Posted January 8, 2005 Take a look at what I have in the dialog box for my post, by clicking "reply" (to my post with the pic in it) and then click "quote." You have to do that, because I can't epxlain it properly in a post -- some things like semicolons in the "quote" are actually HTML codes that don't appear, or appear differently, in the post itself! If you look in the "quote" at what I put in, you'll see what I did -- You had: <img src="http://forums.klipsch.com/idealbb/files/MVC-018S.JPG"> or something like that. All I did was replace everything immediately before the "img src" with only an opening angle bracket, and replace everything after the .jpg" with a closing angle bracket. However, look precisely at what you see in my "quote" and replicate that, NOT what you see in the above paragraph in the post, as it may be slightly different. Another tip: always, always, click on "Preview" before finalizing and submitting the post. That'll show you what the post will actually show. If it's not right in "preview," it won't be right in the post. Oh, yes, I put in height=400 (exactly where and in the way you see it in the "quote") in order to reduce the pic size a little. That way, it doesn't spill off the page or screen to the right, and you don't have to scroll over to see the rest of it. Hope this helps -- Larry Quote Link to comment Share on other sites More sharing options...
desron15 Posted January 8, 2005 Share Posted January 8, 2005 MVC-018S.JPG Quote Link to comment Share on other sites More sharing options...
desron15 Posted January 8, 2005 Share Posted January 8, 2005 <img src=" http://forums.klipsch.com/idealbb/files/ MVC-018S.JPG"&> ---------------- On 1/8/2005 1:19:44 PM LarryC wrote: ---------------- On 1/8/2005 12:23:01 PM desron15 wrote: Tape Deck.. <img src=" http://forums.klipsch.com/idealbb/files/ MVC-018S.JPG"&> ---------------- Quote Link to comment Share on other sites More sharing options...
Q-Man Posted January 8, 2005 Share Posted January 8, 2005 .Test Quote Link to comment Share on other sites More sharing options...
Q-Man Posted January 8, 2005 Share Posted January 8, 2005 Quote Link to comment Share on other sites More sharing options...
Q-Man Posted January 8, 2005 Share Posted January 8, 2005 I had to try again. I need to practice. it didn't work quite the same. Quote Link to comment Share on other sites More sharing options...
Q-Man Posted January 8, 2005 Share Posted January 8, 2005 I'm doing something wrong. It now takes two replys to post one picture. Quote Link to comment Share on other sites More sharing options...
Q-Man Posted January 8, 2005 Share Posted January 8, 2005 Quote Link to comment Share on other sites More sharing options...
LarryC Posted January 8, 2005 Share Posted January 8, 2005 Here, to control the size (if you want to), I added height="400" before the closing bracket in your pic: Quote Link to comment Share on other sites More sharing options...
Q-Man Posted January 8, 2005 Share Posted January 8, 2005 Larry, I'll have to practice more later. It's like playing with a new toy. I want to to go feed my face now. Quote Link to comment Share on other sites More sharing options...
kev313 Posted January 9, 2005 Share Posted January 9, 2005 <?xml:namespace prefix = v ns = "urn:schemas-microsoft-com:vml" /><?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /> Quote Link to comment Share on other sites More sharing options...
jt1stcav Posted January 10, 2005 Share Posted January 10, 2005 I cannot post any pics on this site today! All I get are error messages that take up to a minute to appear once I depress the Upload button...Time Out errors, etc. WTF? Quote Link to comment Share on other sites More sharing options...
DrWho Posted January 10, 2005 Share Posted January 10, 2005 Hey Ooteedee, you have to upload the pictures first. All the pics you posted where you get the blank picture with the X were linked to a file on your computer. Nobody on the internet is linked to your computer so you must first get your picture up on the internet. To do this, you need to click the "attach file" button BEFORE writing your post (just above the quote and rich text buttons). After you upload the picture you can write your text. If you want your uploaded picture to show up in your message (instead of forcing people to click a link), then you will need to use this code: < img src="http://forums.klipsch.com/idealbb/files/%IMAGE.EXT%" > (just make sure there is no space between the "<" and the "img") %IMAGE.EXT% = the filename of the picture you just uploaded. ".EXT" is the file extension (like .gif or .jpg or .jpeg). After you upload a file, there will be a message above the text window in bold showing you the name of the file you just uploaded. The forum sometimes will change the name for various reasons so make sure you use the name the forum gives you. If you screw up, you can always go back and click the edit button and tweak the name until you get it right. (you can open the download button and open the picture and copy the link in the address bar...then put this address in the src="" section). Quote Link to comment Share on other sites More sharing options...
MasterT Posted January 11, 2005 Share Posted January 11, 2005 . Quote Link to comment Share on other sites More sharing options...
MasterT Posted January 11, 2005 Share Posted January 11, 2005 Quote Link to comment Share on other sites More sharing options...
MasterT Posted January 11, 2005 Share Posted January 11, 2005 Quote Link to comment Share on other sites More sharing options...
LarryC Posted January 11, 2005 Share Posted January 11, 2005 ---------------- On 1/11/2005 2:21:55 PM MasterT wrote: Cool it works! Thought you might get a kick out of this! ---------------- EDIT: Very good! I'll leave my previous note here, slightly edited: You can probably see it on your computer, but we can't. Thoroughly read DrWho's post above, where he talked about this (as did I, FWIW). Then, click "edit post" for your second one, and compare with one of those above that successfully shows a pic -- in those, you click "reply" and then "quote" to see what Q-man and I did. You'll see that the successful pics are sourced from the Klipsch server, not individual computers. The pic has to be uploaded there first. Klipsch server files start out as "http://forums.klipsch.com/idealbb/files/...." Then, do it exactly like what you see in the successful ones above, without spaces and height instructions between the opening bracket and the IMG SRC. Larry Quote Link to comment Share on other sites More sharing options...
MasterT Posted January 12, 2005 Share Posted January 12, 2005 Thanks Larry. I changed it above. Let me know if you can see it now. I think I did it right Quote Link to comment Share on other sites More sharing options...
LarryC Posted January 12, 2005 Share Posted January 12, 2005 You sure did! Congratulations! I too was surprised at the mystical rituals one must master. Larry Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.