-
Posts
2895 -
Joined
-
Last visited
-
Days Won
5
Content Type
Forums
Events
Gallery
Posts posted by NBPK402
-
-
From what I have read...all cartridges are actually balanced, it is just most are wired unbalanced. I like balanced, but I did not get into rewiring mine for balanced. If I end up down the road getting a higher end table I will look more into getting one with balanced wiring.Interesting, never seen balanced outs for the tt. It makes a huge difference between my pre and my integrated, had to experiment with it.Sent from my SM-T830 using Tapatalk
- 1
-
I would like to try that, if I can get a tapped horn that would put a 2'x2' horn on top and have the correct listening height.I don't know, maybe its me, but couldn't one build a 2'x2' MEH horn and set it on of a tapped horn and have something better, just not so "hifi" looking? Not to crazy about the side mounted woofers myself.
Sent from my SM-T830 using Tapatalk
- 1
-
SOLD
Sent from my SM-T830 using Tapatalk
- 1
-
How ironic... I was in the USAF at RAF Alconbury from 1978 to 1981, and I was offered a job as the rep for the UK, for Nakamichi, and Yamaha. I Turner it down because I was enlisted, and with varying shifts I did not think I could do the job...now I with I would have accepted the offer.While serving in the USAF and in Germany in the mid 80's, I was a part-time speaker rep for Cerwin Vega, Bose, Infinity, and Klipsch, as well as DBX effects. It was at that time I fell deeply in love with Cornwall's, but on an enlisted man's pay could never afford them. Now that I'm older, and in a better financial position, I can afford some of the "better things in life." So I am actively working to scratch that itch that dates back to 1983 when I heard the Cornwall for the first time.Jon
Sent from my SM-G985F using Tapatalk
-
I now have the Minidsp DDRC88A crossover/Dirac in place for my front 3 channels, and have the crossover settings transferred. I still need to install jacks on the rear of each speaker cabinet for the AmpCamp speaker hookups, and rewire the speakers internally. I am going to use banana jacks for the ACAs as it will avoid confusion down the road. On my left and right channels I am planning on putting the appropriate AmpCamp amp on top of each speaker... I am hoping it will not pass too much heat below the amp to the speaker cabinet as it is veneered. I will use the 4 wire Speakons for driving each woofer with its own amp.
Sent from my SM-T830 using Tapatalk
- 1
-
Sometimes its cheaper to keep them...my last divorce cost me over $100k.Of course, in the life of a a true audiophile, sometimes it's much simpler and cheaper to get rid of the offending wife or girlfriend who doesn't like big horns. I never had that problem, thankfully.
Sent from my SM-T830 using Tapatalk
- 1
-
My MEHs are not as big as your Jubilees, but my wife did not like the big horn look at all. I made some black grills for mine and now she doesnt complain anymore about them.
Sent from my SM-T830 using Tapatalk
- 2
-
I was wondering when someone would make some mumps. Did you notice a difference with your mumps? How did you make and install them?
Yes, the shiny black areas are modified contours, similar to what are called mumps on other horns.
The wood trim is rosewood veneer. The bright flash for that picture makes the wood color appear lighter than normal.
Sent from my SM-T830 using Tapatalk
-
Are the drivers all about the same depth? I have the EV DH1As, and was wondering if others are deeper insize.
Sent from my SM-T830 using Tapatalk -
I picked up a Pioneer player for about a $100, as I recall. Mine also rips SACDs with a modified firmware.
Sent from my SM-T830 using Tapatalk -
1978 la scalas purchased new in 78
Kp3002s
Used Lascalas
Hips
K402s
Sent from my SM-T830 using Tapatalk
- 1
-
I have a loft about 8' behind the mlp.Impressive space and project to undertake
It's been a while.....
Your space reminds me of the rooms in the Roman baths in Pompeii.
Vaulted ceiling and the shape and placement of the window etc....
With the speakers pointed away from the windows,
should be similar to the older theaters with the balcony, I always though the balcony had a better view and sound at the Uptown in DC, and others. Audio for Apocalypse Now was excellent first run..
Sent from my SM-T830 using Tapatalk
-
Are exchanging the Xilica for the Minidsp? I would think there would be a down grade to sq.
What Exactly are the 2'x2' mehs for?
Sent from my SM-G986U using Tapatalk
I am getting the 2 ddrc88ms for Dirac, and also to replace the Xilica...Chris Said they should be fine. I used the same models before when I had my JBLS and I never heard any difference when I moved to the Xilica.
The 2x2 mehs will be for my surrounds...unless they sound as good as the current mehs, then they will move to the front. If they are moved to the front, I will be looking at building a pair of subs to go under them.
Sent from my SM-T830 using Tapatalk
- 1
-
I will be doing some upgrading over the next few months...
Ordered:
2 Minidsp ddrc88ms
3 Pass ACA stereo/mono amps
Diy projects:
2 2' x 2' MEHs modeled from the small side of my MEHs. These will use the same drivers, but the horn will be made of MDF.
Selling:
4 Klipsch rp160Ms
Musical Fidelity MX VYNL phono preamp
Yamaha CXA 5100 preamp
Xilica xp4080 crossover
Some Icepower asx20btl, and asx125SE/BTL amp modules
Dune HD PRO 4K PLUS media player
Sent from my SM-T830 using Tapatalk
-
I thought my EV DH1As were massive!
Sent from my SM-T830 using Tapatalk -
I run Speakons...I use a 4 wire one for my 2 way active and they make a 8 wire one for a 4 way. They are super simple to hookup and disconnect, but a bit of a pain to wire as a 4 way.
Sent from my SM-T830 using Tapatalk
- 1
-
That is what I need for my MEHs. I wish I could get a flatpack still or some plans... I know where I can get some CNC work done if I had the plans.This whole thread is about the Exodus Anarchy 25hz tapped horn.
Sent from my SM-T830 using Tapatalk
-
What subYes I found this to be the best way to have them in my room.
Is that under the belle?
Sent from my SM-T830 using Tapatalk
-
I will be more than happy with my MEHs.
Sent from my SM-T830 using Tapatalk -
My friend built a shed in his back yard...I think it is 10x12, and he has a HT in it with 3 LaScalas. His setup sohnds great too.
Sent from my SM-T830 using Tapatalk- 2
-
You might even be able to solder or braze the pins on....it would be like a name tag plate is.
You might even be able to get some thin nameplares and use some kind of glue and just glue it to the plates...it might be easier if you can find name plates thin enough.
Sent from my SM-T830 using Tapatalk
-
Have you thought about gluing some pieces of metal like for earings...then just push through the grill and put little earing clasps on it to secure. By doing it this way you do not damage the grills other than 1 or 2 small holes.
Sent from my SM-T830 using Tapatalk- 1
-
I am debating on absorption panels below 12' and poly diffuser panels 12' to 16' not sure if that will work or not. I think I still have 3 boxes of Roxul r60 2" left.
Sent from my SM-G985F using Tapatalk
- 1
-
I am loving them more everyday...best horn speakers I have ever owned. I still need to get some more acoustic panels made though to get the echo down. Sounds like a night club when I turn it up, but at lower level the echo is not as bass
LOL
Sent from my SM-G985F using Tapatalk
- 3
Tom Danley's Hyperion
in 2-Channel Home Audio
Posted
How is a k402 3 times the size of a danley sh50?
Sent from my SM-T830 using Tapatalk