LTusler
-
Posts
240 -
Joined
-
Last visited
Content Type
Forums
Events
Gallery
Posts posted by LTusler
-
-
Try searching the net for a fiber ST connector to Toslink. ST was one of the the first generations of fiber connector. Are you sure the BNC isn't a coax connection?
-
I did the live stream on Nugs. The 2 nights were great. Friday got a bit slow with some different acts. It seemed to me that when they switched bands, every other one had low sound levels, was it that way live on site?
-
The PE Corners are an exact match except for one detail. They do not have the relief slot at each end for the corner edging to slide into to cover the edge. So you will need to cut the edging square and to exact length. I am restoring a pair of KP-320's and a pair of KP-480's and will not replace the edging just the corners. They were painted white and I am taking them back to black. Haven't found a good way to remove the white paint easily and completely. I also ordered the PE 262-318 handles, they are a match as well.
-
For you drinkers, have a look at http://getdrunknotfat.com/ it list calories, carb and ABV for everything you can think of.
-
i just bid them up to $300 and there is a higher bid. I don't need them that bad.
-
"We recommend hiring a professional electrician" A licensed pro would not install this as power wire.
-
Never tried a analog preamp in the system, I guess one could call the MiniDSP a digital preamp.
Godataloss if you haven't already, I would recommend you read ChrisA's DSP posts here in the community. It may help you decide which way to go regarding a DSP for your system.
-
I would like one of those signs.
-
Do you have a link to the "Box"?
-
I will take it, sent you a PM!
- 3
-
Yup, I am thinking of going in the same direction. My amps are a VTA ST-70, a QSC 300 and a Sunfire MKII sub.
-
Since I went fully active, I have not used the room correction in the 88A. I have just used REW and found my crossovers and PEQ's, put those into the 88A and am running with that. The nice thing with the 88A is that there are different configurations you can store and run to compare setups with. If you haven't purchased a product yet, you may want to wait until they announce more products that run the 2.0 version of the DIRAC. Be sure you read and understand the product application notes for the various products. It is not alway immediately obvious how they work.
- 1
-
My system is Source, DAC, MiniDSP 88A, Tube Amp for HS, SS amp for LF. The DSP is the volume control. Running in a 4 way active with a powered sub. Turntable pre is connected directly to 2 of the 88A inputs and controlled by the mixer in the 88A.
-
-
We got up to -3 today from -30 this morning.
- 1
-
Look up the Good Eats show on the subject.
- 1
-
Not to thread crap, but can someone tell me where or how to purchase Jubes? I am going to retire in a year and I need to get my budget set.
TIA!
-
Vintage and then tweeks for extra fun!
- 1
-
Maybe the Xovers need to be re-capped?
-
Not sure if this helps but I run a VTA ST-70, and the recommended bias voltage on pin 5 is .400 VDC, the tubes will last longer. But YMMV.
-
Its not the cabinet, its the horns and bass driver. You can read up on the intent on ctriesspeakers.com
-
Thanks. I bought her current CD, it has some of the same songs we heard, so that will help too.
- 2
-
I haven't had enough alone time with to say yet. I went to see Claire Lynch in Minneapolis on Tuesday. Very small venue, looks like it was set up for about 120 people, and was about half full. She has an excellent stand up bass player, so I tried to burn the excellent sound into my brain and will test it against my system this weekend.
- 1
-
“Klipsch Killer” speakers?
in 2-Channel Home Audio
Posted
They look like Cornscala's to me.