Tom Bird

Ok. Thanks. Just didn't know if you knew. Also thanks for the tags. Sent from my LM-G820 using Tapatalk

Hey Dean, I noticed it said it also replaces the k43 E. Any idea if it has the same power handling capabilities? Sent from my LM-G820 using Tapatalk

I guess you are all set. Sent from my LM-G820 using Tapatalk

I have a cf2 that I modified the cabinet to make a center Channel. Basically it is now a large C7. It is just sitting at the moment where are you located Sent from my LM-G820 using Tapatalk

What about the kp281? Is their much of a difference? Same speaker kp2002 c Sent from my LM-G820 using Tapatalk

So after watching the video I'm assuming he's stiffening the spider and remolding the rubber by stiffening it in the upper position . Mine is lopsided but I'm assuming if this process works it would fix that as well. The other thing is my woofer has paper edges and not rubber. Would it still work? Sent from my LM-G820 using Tapatalk

Spider moves up and down along with the cone is not loose whatsoever but is also sagging in same direction as the woofer Sent from my LM-G820 using Tapatalk

I have had a driver where the magnet was off centered. I do believe I have a picture somewhere. Sent from my LM-G820 using Tapatalk

I posted a pic Sent from my LM-G820 using Tapatalk

Missing pic left low and rightbside high.

Only woofer sag I have experienced is on k22 Heresy 1 and k28 kp2002.-c2. Sent from my LM-G820 using Tapatalk

Thanks. I will check them in the morning Sent from my LM-G820 using Tapatalk

Was going to look for electrolytic so it stays the same type but not sure if this would change anything. Sent from my LM-G820 using Tapatalk

I did think about that but wasn't sure if you could do that with the electrolytic. Now just to find a 50 and a 47 that match. LOL Sent from my LM-G820 using Tapatalk

I don't have the knowlage to make that change RE: what or if it would change anything. I can solder no problem. Thanks for your input Sent from my LM-G820 using Tapatalk

I have had these klf30's for years. It was my first dip outside the RP line and is what really started me on the journey so I would like to bring them back to OEM spec. I as soon as I picked these up I purchase Crites crossovers and Titanium diaphragms from Bob. The new crossovers made a bigger difference than the diaphragms but installed them as well. I still have the original Mylar. I do believe I can get the caps but the woofer 97 uf is the one I'm having the hardest time with. Any suggestions? Sent from my LM-G820 using Tapatalk

I felt it increased the bass output (not lower) is enough so it sounds like a better overall speaker. JMO Sent from my LM-G820 using Tapatalk

When I did it I used the pre out of the AVR to an amplifier and ran both speakers in mono Sent from my LM-G820 using Tapatalk

Thank you for the info Sent from my LM-G820 using Tapatalk

Thanks Dean, I have the k28's with the E network on 1 pair and loved the 2-3 DB gain on the woofer. I think it makes it a better speaker. I want to do the same thing with the other pair that is the E-2. Are you telling me to change the E-2 back to an E? Sorry for my confusion but I thought the E2 was because of the k52 instead of the k55 but I truly do not know. Thanks Sent from my LM-G820 using Tapatalk

I remember their is a process but forgot what it was. Sent from my LM-G820 using Tapatalk

Looking to see what network adjustment needs to be done for the E network (k22 to K28, K55v & K77M. Also have another pair that had an E-2 network but had a K22(bad) and a K24. Network had inductors 4 Ma and a 2.5 Ma. Because of the bad woofer I would also like to change them to the K28, k52 & k77 round mag. Thank you for any info Sent from my LM-G820 using Tapatalk

I have had many matching LCR. Heresy's, Klf's Chorus, Cornwalls and now LaScala (industrials). Old and Chorus all 7 and Cornwalls and LaScala I have 5 with various fill in. Loved them all. I truly believe their is no better front LCR that are matching. Sent from my LM-G820 using Tapatalk

Possibly but you would have to pay the charges. The other thing is if you're buying one you might want to consider going with the k28 so you have a matching pair. The shipping can't be cheap Sent from my LM-G710VM using Tapatalk

I have a k24 available. Sent from my LM-G710VM using Tapatalk