lotusmark Posted July 21, 2009 Share Posted July 21, 2009 I can't see any visible fasteners. There is a hole at each end, but no screws. Thanks Mark Quote Link to comment Share on other sites More sharing options...
jhoak Posted July 21, 2009 Share Posted July 21, 2009 I have a pair of 83s with AL crossovers and they're screwed down with 4 wood screws in each crossover. Quote Link to comment Share on other sites More sharing options...
oldenough Posted July 21, 2009 Share Posted July 21, 2009 My 77's are held down with two screws on each maybe two inches in from the centre. Quote Link to comment Share on other sites More sharing options...
Wrinkles Posted July 21, 2009 Share Posted July 21, 2009 In both of mine, they are fastened to the wood using wood screws and are under and to the left of the squaker driver. The board does not extend out into the air. Mine are 1989/90 versions. Wrinkles Quote Link to comment Share on other sites More sharing options...
thumperxes Posted July 22, 2009 Share Posted July 22, 2009 my alk es networks held in place by GRAVITY Quote Link to comment Share on other sites More sharing options...
oldenough Posted July 22, 2009 Share Posted July 22, 2009 my alk es networks held in place by GRAVITYSorry but I don't trust old technology like that...[] Quote Link to comment Share on other sites More sharing options...
Daddy Dee Posted July 23, 2009 Share Posted July 23, 2009 Using gravity is such a heavy solution. But, we can agree that it is always down to Earth. Quote Link to comment Share on other sites More sharing options...
jhoak Posted July 23, 2009 Share Posted July 23, 2009 http://www.nsta.org/store/product_detail.aspx?id=10.2505/9780873552097.4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.