greg928gts Posted March 9, 2010 Author Share Posted March 9, 2010 Those look great Greg, keep thinking outside the horn. Are you going to run some tests prior to changing the trim so you know how the trim change affects the horn, and how that prototype compares to a conventional tractrix design? Yes, I will do plenty of testing, but not with/without trim. I doubt the trim will make any difference, it's beyond where the horn design completes itself, and it's outside of where the wave would contact it. I'll be comparing directly to my V-Trac horns in my Khorns. How's your garage workshop coming along? Looking forward to your Jamboree build. BTW, this prototype horn, and the finished horns to follow, are for a customer who is building Jamboree bass bins. Greg Quote Link to comment Share on other sites More sharing options...
greg928gts Posted March 9, 2010 Author Share Posted March 9, 2010 I've developed an improved throat transition for this horn. Greg Quote Link to comment Share on other sites More sharing options...
Pete H Posted March 9, 2010 Share Posted March 9, 2010 How's your garage workshop coming along? Looking forward to your Jamboree build. BTW, this prototype horn, and the finished horns to follow, are for a customer who is building Jamboree bass bins. Slow but sure. I think I'm going to knock out a pair of split Cornwalls first and hopefully will be starting the cabinets this week as I have most of the parts in now and then on to the big boys. Al's got a thread going on horn size and driver crossover points and was wondering what you are doing when your building a tractrix horn that, as an example, is going to have a driver in it that will be crossed at say 500 or 600, what tolerances will you apply when building the horn? Would you build it specifically for the designed crossover point or do you design it lower, and if so, how much? You have to love this adventure, with every answer comes another question or two. Keep up the great work! Quote Link to comment Share on other sites More sharing options...
greg928gts Posted March 9, 2010 Author Share Posted March 9, 2010 How's your garage workshop coming along? Looking forward to your Jamboree build. BTW, this prototype horn, and the finished horns to follow, are for a customer who is building Jamboree bass bins. Slow but sure. I think I'm going to knock out a pair of split Cornwalls first and hopefully will be starting the cabinets this week as I have most of the parts in now and then on to the big boys. Al's got a thread going on horn size and driver crossover points and was wondering what you are doing when your building a tractrix horn that, as an example, is going to have a driver in it that will be crossed at say 500 or 600, what tolerances will you apply when building the horn? Would you build it specifically for the designed crossover point or do you design it lower, and if so, how much? You have to love this adventure, with every answer comes another question or two. Keep up the great work! I design about a half octave lower than the crossover point. But as I build more and more horns, I'm begining to understand how to modify them a little for better performance. So the Fc may end up being lower or higher than a half octave in relation to the crossover point, depending on other factors, like the throat shape, or if the length of the horn has been modified in relation to the mouth size, or if the horn is pure tractrix or a combination of curves, etc... I'm reluctant to get into this too much here on the forum. Greg Quote Link to comment Share on other sites More sharing options...
Pete H Posted March 9, 2010 Share Posted March 9, 2010 I design about a half octave lower than the crossover point. But as I build more and more horns, I'm begining to understand how to modify them a little for better performance. So the Fc may end up being lower or higher than a half octave in relation to the crossover point, depending on other factors, like the throat shape, or if the length of the horn has been modified in relation to the mouth size, or if the horn is pure tractrix or a combination of curves, etc... I'm reluctant to get into this too much here on the forum. Greg I understand, and I think I'm going to try a few different configurations on the split Cornscala's to play around with that myself and see what I can learn. Quote Link to comment Share on other sites More sharing options...
twistedcrankcammer Posted March 9, 2010 Share Posted March 9, 2010 Greg, I like the concept, but is the horn in the picture finished? If it is, there are entirely too many gaps I can see and slightly off lengths. Otherwise a very pretty concept. Roger Yes, thanks for pointing that out Roger! edit - LOL - didn't want you to think I took any offense. I had a VERY difficult time putting this trim on, which is another reason why I'm leaning towards doing it a different way. I didn't sand or fill any of the trim, it's just a prototype horn. But I wouldn't rely on sanding and filling too much anyway, the joinery would have to be better. It took me about two hours to do the trim on that one horn. Greg Greg, Did not figgure it would be taken wrongly at all. My experience with custom woodworking said it was not up to snuff with your usual finished product, and we can't have you slackin now can we?? [8-|] Still waiting to see pictures of you starting on that old Klipschorn I packed for you... [] Rog Quote Link to comment Share on other sites More sharing options...
Mike Dubay Posted March 9, 2010 Share Posted March 9, 2010 Very cool Greg, I enjoy seeing some one extend the boundaries. I would agree that in a contemporary/60's retro looking room, this would be a stunning center piece. Quote Link to comment Share on other sites More sharing options...
Mike Dubay Posted March 9, 2010 Share Posted March 9, 2010 Oops, double post.. Quote Link to comment Share on other sites More sharing options...
winchester21 Posted March 12, 2010 Share Posted March 12, 2010 Very cool- I see nothing wrong with it-except that it is not in my listening room Quote Link to comment Share on other sites More sharing options...
greg928gts Posted March 12, 2010 Author Share Posted March 12, 2010 I've got it sitting on one of my Khorns now, and it's very obvious to me now that the top and bottom extensions don't work well aesthetically. The side trim looks great, and I think if that trim is installed around the face of the horn without the top and bottom extensions it will look great. I listened to it for the first time today and it's a great sounding horn. Makes me consider the idea of removing the tops of my Khorns and using horns like that instead - if they pass the WAF. Greg Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.