kg4guy Posted June 5, 2010 Author Share Posted June 5, 2010 I made these from African Mahogany and the veneer is on the plywood but as I said in a previous post it was $140. a sheet. I try and clean the excess glue up with a wet rag and sand away any other. Quote Link to comment Share on other sites More sharing options...
Bacek Posted June 6, 2010 Share Posted June 6, 2010 My idea for edges was to protect them before gluing with masking tape, but I don't know if it will work. Quote Link to comment Share on other sites More sharing options...
Yura Posted June 6, 2010 Share Posted June 6, 2010 This doesn't need veneer on top - just needs some stain or clear coat. Looking good so far - keep us updated. Quote Link to comment Share on other sites More sharing options...
greg928gts Posted June 6, 2010 Share Posted June 6, 2010 Looks good. Why didn't you use the mahogany plywood for the bottom? Greg Quote Link to comment Share on other sites More sharing options...
Blvdre Posted June 6, 2010 Share Posted June 6, 2010 He's painting the bottom black. Quote Link to comment Share on other sites More sharing options...
billybobg Posted June 7, 2010 Share Posted June 7, 2010 I use plastic weld on the T-nuts so they will not come out. I don't understand what the T-nuts are used for. I don't remember seeing them on any LS drawings I've ever looked at. bob Quote Link to comment Share on other sites More sharing options...
Guest David H Posted June 7, 2010 Share Posted June 7, 2010 I don't understand what the T-nuts are used for. I don't remember seeing them on any LS drawings I've ever looked at. The T nuts hold the woofer to the motorboard. Dave. Quote Link to comment Share on other sites More sharing options...
billybobg Posted June 7, 2010 Share Posted June 7, 2010 Thanks Dave. The square hole pattern didn't lead me to believe that, but looking at the pic of the inside of the base bin I can see the other holes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.