jimjimbo Posted July 26, 2014 Share Posted July 26, 2014 Have seen some relatively positive comments about this product, and was wondering if anyone here has any experience with it. Thanks. http://www.amazon.com/Howard-Restor-A-Finish-Walnut-8oz/dp/B009E2ALWM/ref=sr_1_12?ie=UTF8&qid=1406399225&sr=8-12&keywords=howard%27s+restore-a-finish Quote Link to comment Share on other sites More sharing options...
fuzzydog Posted July 26, 2014 Share Posted July 26, 2014 Yeah, I tried some a few weeks ago to freshen up my coffee table. Looked the same before and after. I haven't tried using it with steel wool though, which some of the reviewers recommended. Quote Link to comment Share on other sites More sharing options...
mungkiman Posted July 26, 2014 Share Posted July 26, 2014 If you're thinking of using steel wool, look for brass wool instead. No rust. Quote Link to comment Share on other sites More sharing options...
dbomberger Posted July 26, 2014 Share Posted July 26, 2014 I saw a good demo of this also. However I had already purchased some Watco Rejuvenating Oil which I applied to a set of Advents as an experiment just this morning. So far it looks like an amazing transformation. I used steel wool to apply. After 72 hours I'm considering adding Watco Satin Wax or the Howards wax which has carnuba wax and orange oil. Along with a refoam this will make a nice set of vintage speakers for someone. Like I stated earlier though, the transformation is amazing, but I wanted to try it on something less important to me before I tackle my Cornwalls. Quote Link to comment Share on other sites More sharing options...
fuzzydog Posted July 26, 2014 Share Posted July 26, 2014 After 72 hours I'm considering adding Watco Satin Wax or the Howards wax which has carnuba wax and orange oil. I have had good results with the Howards feed-n-wax. It works well as a furniture polish. 1 Quote Link to comment Share on other sites More sharing options...
Mr. Clark Posted July 28, 2014 Share Posted July 28, 2014 (edited) I have used Restor A Finish and the Feed-n-Wax on a pair of beater La Scalas I picked up. Man, what a difference! They look great. I started with super fine steel wool (0000) and denatured alcohol to clean them, then used the wool again with the Restor A Finish. Followed it up with the wax (applied with cloth) and boom! They look spectacular! It's not a cure all, though. Deep gouges can be colored, but are noticeable in harsh light. Still, it's pretty remarkable for a quick fix. Edited July 28, 2014 by Mr. Clark Quote Link to comment Share on other sites More sharing options...
Mr. Clark Posted July 28, 2014 Share Posted July 28, 2014 Can post pictures once I figure that out. It keeps telling me that my flickr photos are an "extension" that is "not supported by this community." Quote Link to comment Share on other sites More sharing options...
Mr. Clark Posted July 29, 2014 Share Posted July 29, 2014 Quote Link to comment Share on other sites More sharing options...
Mr. Clark Posted July 29, 2014 Share Posted July 29, 2014 Mercy! Finally! Sorry about the size. No before photos, but some happy ever after pictures! Quote Link to comment Share on other sites More sharing options...
Deang Posted August 2, 2014 Share Posted August 2, 2014 Advents were sealed with shellac. Shellac and wax (or oil) does't mix. What breaks the shellac down? I've done too many Advents, all with denatured alcohol, and then Watcos. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.