onemoretime Posted July 8, 2016 Share Posted July 8, 2016 I have a pair of Epic speakers in need of touch-up paint. Any thoughts specifically for the MDF front face, which appears to be somewhere between flat and semi-glass black? What about for the black veneer on the top and sides? Thx, --Scott Quote Link to comment Share on other sites More sharing options...
avguytx Posted July 9, 2016 Share Posted July 9, 2016 I'm pretty sure that's a thin wrap over the front part where the drivers are mounted. You might could touch it up with some Valspar Black Satin paint. That veneer is also painted and may work with the same paint and artists paint brush. 1 Quote Link to comment Share on other sites More sharing options...
Rivervalleymgb Posted July 9, 2016 Share Posted July 9, 2016 (edited) I removed the plastic on the motor board and sanded, then painted a piano finish on the MDF. Sanding the cabinets revealed a red oak plywood that I should have left before painting satin black. The red oak with the absorbed black satin made a beautiful combination. Edited July 9, 2016 by Rivervalleymgb 1 Quote Link to comment Share on other sites More sharing options...
Rivervalleymgb Posted July 9, 2016 Share Posted July 9, 2016 What the cabs look like sanded: 1 Quote Link to comment Share on other sites More sharing options...
Woofers and Tweeters Posted July 9, 2016 Share Posted July 9, 2016 What the cabs look like sanded: That's real nice looking Oak veneer Quote Link to comment Share on other sites More sharing options...
onemoretime Posted July 9, 2016 Author Share Posted July 9, 2016 I'm pretty sure that's a thin wrap over the front part where the drivers are mounted. You might could touch it up with some Valspar Black Satin paint. That veneer is also painted and may work with the same paint and artists paint brush. Valspar Black Satin makes good sense. I don't paint well so prefer not to make a problem worse, but worn spots have been bugging me. Thanks! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.