Moit Posted April 24, 2018 Share Posted April 24, 2018 Just purchased my 1st pair of Klipschorn Kind of a barn find - older lady selling for sick ex-husband as he moves into a senior home. Test in an old house with cheap Sony amp and CD player. Not in corners, small room, but wood floor on a basement. They sounded amazing. Loaded them up drove 2.5 hours home hooked them up - they now sound terrible, no low end and muddy everything else. My space is in a finished basement, so concrete floors, with carpet and pad - 14 foot wall, with K-Horns in the corners. Ceiling is just under 8 ft and back of room is open - 28+ feet. Current system was driving a pair for Forte II's, and they sounded great. Working on posting some photos. Thanks for any help or advice in advance. Moit Quote Link to comment Share on other sites More sharing options...
codewritinfool Posted April 24, 2018 Share Posted April 24, 2018 This is a duplicate thread. Main thread is here: Quote Link to comment Share on other sites More sharing options...
Moit Posted April 24, 2018 Author Share Posted April 24, 2018 I am in LaCrosse, WI https://photos.google.com/share/AF1QipMvunVSrBt-W28SZFxuZmaw98BiwbnN-KUpcxARRDAXO5x85ka2ZMFp1UiSacqdXg?key=THZXNmR4WHVhLXUta0dFckcxeWFEejg1amoxczlB Here is a link to some photos as well. Phase as in Red to Red (Positive) Black to Black (negative)? Quote Link to comment Share on other sites More sharing options...
USNRET Posted April 24, 2018 Share Posted April 24, 2018 Welcome, the first thing I would do is clean those connections at the crossover; at least least loosen and re-tighten screws but they really need to be cleaned. After that isolate which driver is causing the issue (balance full left and listen at the grill and then repeat for the right) Quote Link to comment Share on other sites More sharing options...
Moit Posted April 24, 2018 Author Share Posted April 24, 2018 I am in LaCrosse, WI https://photos.google.com/share/AF1QipMvunVSrBt-W28SZFxuZmaw98BiwbnN-KUpcxARRDAXO5x85ka2ZMFp1UiSacqdXg?key=THZXNmR4WHVhLXUta0dFckcxeWFEejg1amoxczlB Here is a link to some photos as well. Phase as in Red to Red (Positive) Black to Black (negative)? 1 Quote Link to comment Share on other sites More sharing options...
codewritinfool Posted April 24, 2018 Share Posted April 24, 2018 Thanks for the photos. See reply in other thread. Quote Link to comment Share on other sites More sharing options...
Schu Posted April 24, 2018 Share Posted April 24, 2018 You broke them... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.