Tommy L Newton Posted September 21, 2020 Share Posted September 21, 2020 (edited) I didn’t see the numbers underneath. Here’s a good picture: Edited September 25, 2020 by Tommy L Newton Quote Link to comment Share on other sites More sharing options...
ngen33r Posted October 1, 2020 Author Share Posted October 1, 2020 Tommy, That is perfect. I am going to call those 330ohm 5% (Orange Orange Brown Gold) 2W. Since these seem to get rather hot and burn. I will use 3W flameproof replacements. Such an odd failure, but then again people leave these things on 24/7 so I am not suprized. Quote Link to comment Share on other sites More sharing options...
sstreet Posted October 13, 2020 Share Posted October 13, 2020 Where does pin 1 connect for the control board 660045-1on the 640007 Power Supply? The pin 1 seems to go no where on the PSU? No trace on top or bottom? The 640007 does not seem to be a multi layer board? Quote Link to comment Share on other sites More sharing options...
willland Posted October 16, 2020 Share Posted October 16, 2020 Can someone look into this? Bill Quote Link to comment Share on other sites More sharing options...
Akshue Posted October 21, 2020 Share Posted October 21, 2020 My sub is also dead... looking for a repair. How much will this set me back? Is anyone available? RT12BK Quote Link to comment Share on other sites More sharing options...
ngen33r Posted October 22, 2020 Author Share Posted October 22, 2020 On 10/12/2020 at 8:12 PM, sstreet said: Where does pin 1 connect for the control board 660045-1on the 640007 Power Supply? The pin 1 seems to go no where on the PSU? No trace on top or bottom? The 640007 does not seem to be a multi layer board? Pin 1 is not connected. If I remember correctly it is a shutdown pin to turn the entire supply off. Quote Link to comment Share on other sites More sharing options...
ngen33r Posted October 26, 2020 Author Share Posted October 26, 2020 And so it begins. I have started my video blogs and will continue to support the repair community with detailed videos of how I do a repair. 1 Quote Link to comment Share on other sites More sharing options...
dudaindc Posted October 27, 2020 Share Posted October 27, 2020 Awesome - thanks for doing that! Quote Link to comment Share on other sites More sharing options...
ngen33r Posted November 4, 2020 Author Share Posted November 4, 2020 Here is an RT-10 repair and what I learned. Quote Link to comment Share on other sites More sharing options...
Rikotiko Posted November 9, 2020 Share Posted November 9, 2020 Hello, please tell me how to replace the SCK-048 thermistor. which stands at the entrance there are two of them. Subwoofer rt-12d Quote Link to comment Share on other sites More sharing options...
ngen33r Posted November 16, 2020 Author Share Posted November 16, 2020 You need to de-solder them and solder new ones in. If those are blown, you will have more bad things than that. https://datasheetspdf.com/pdf/685354/THINKING/SCK-048/1 Quote Link to comment Share on other sites More sharing options...
Rikotiko Posted November 25, 2020 Share Posted November 25, 2020 Hello, please tell me. at the output of the power supply of the final stage is constantly 10V, is this normal voltage or is there a malfunction? Klipsch RT12d subwoofer. Quote Link to comment Share on other sites More sharing options...
Rikotiko Posted December 2, 2020 Share Posted December 2, 2020 If the contacts CD + CD- 10V Is this the norm? How many volts should the RT12d subwoofer output be? Quote Link to comment Share on other sites More sharing options...
Rikotiko Posted December 2, 2020 Share Posted December 2, 2020 If the BASH board is defective? How much does it cost you? Quote Link to comment Share on other sites More sharing options...
ngen33r Posted December 6, 2020 Author Share Posted December 6, 2020 10V is high. 8V is normal. Something else is wrong. Quote Link to comment Share on other sites More sharing options...
Rikotiko Posted December 6, 2020 Share Posted December 6, 2020 I ask for help as it is very expensive for me and Russia to send an amplifier to you. PLEASE PROMPT WHAT ELEMENTS TO PAY ATTENTION TO CHECK? HOW MUCH DOES Indigo Canada 660045-1 and Indigo Canada 660043-1 COST? Quote Link to comment Share on other sites More sharing options...
Rikotiko Posted December 6, 2020 Share Posted December 6, 2020 What video to watch for repairing the RT12d subwoofer? Quote Link to comment Share on other sites More sharing options...
Rikotiko Posted December 6, 2020 Share Posted December 6, 2020 (edited) 18 hours ago, ngen33r said: 10V is high. 8V is normal. Something else is wrong. Should the rt10d, RT12d also have 8 volts? Edited December 6, 2020 by Rikotiko Quote Link to comment Share on other sites More sharing options...
ngen33r Posted December 8, 2020 Author Share Posted December 8, 2020 Quote Link to comment Share on other sites More sharing options...
ngen33r Posted December 8, 2020 Author Share Posted December 8, 2020 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.