haydukej Posted May 20, 2020 Share Posted May 20, 2020 *6/10: dropped take it all price Hi all, Listing these items for my brother. He's the original owner and curiosity lead him to replacing these with the DIY 1099s and two Martys for the sub. All are black cabinets and in good shape and made at the Hope HQ. They've served as a home theater setup in a non-smoking home. RC-7: The woofers do show some signs of battles with the kiddos growing up; however, no impact to sound and with the grill in place, you won't know the difference. $300 RF-7: Good shape, clean woofers and grills. Sequential serials as well $1,000 RSW-15: The grill has suffered from the common pin break, but he's currently repairing them using this method: https://community.klipsch.com/index.php?/topic/183054-plastic-grill-pin-fix-for-rf-series-speakers/ . It has also been updated/upgraded with the SVS Isolation System $500 Take the whole lot for $1,400! These are located in Edwardsville, IL (62025), basically St. Louis area. Not looking to ship these as weight and risks are too much. Probably willing to drive 30-50 miles if that helps. No original boxes. Thanks for your interest! 1 Quote Link to comment Share on other sites More sharing options...
haydukej Posted June 6, 2020 Author Share Posted June 6, 2020 bump and welcome thoughts/input. Thanks Quote Link to comment Share on other sites More sharing options...
willland Posted June 6, 2020 Share Posted June 6, 2020 Nice gear. Good luck with your sale. Bill Quote Link to comment Share on other sites More sharing options...
madfusker Posted June 6, 2020 Share Posted June 6, 2020 I live close by and wish I could help ya out since I've been watching for something like this, but scraping up that much cash is harder than ever right now as most of us know. I will ask around though. What would that driver cost to replace from Klipsch? $150? Any other surface scratches? Quote Link to comment Share on other sites More sharing options...
DTO Posted June 6, 2020 Share Posted June 6, 2020 Shame about the rc-7! I am actually looking for one and the only two I’ve seen lately are this one and one in Ohio ($200), both with about the same damage. Quote Link to comment Share on other sites More sharing options...
opusk2k9 Posted June 7, 2020 Share Posted June 7, 2020 18 hours ago, DTO said: Shame about the rc-7! I am actually looking for one and the only two I’ve seen lately are this one and one in Ohio ($200), both with about the same damage. Here are come replacement woofers: https://offerup.com/item/detail/887573806/ 2 Quote Link to comment Share on other sites More sharing options...
haydukej Posted June 7, 2020 Author Share Posted June 7, 2020 18 hours ago, madhusker said: I live close by and wish I could help ya out since I've been watching for something like this, but scraping up that much cash is harder than ever right now as most of us know. I will ask around though. What would that driver cost to replace from Klipsch? $150? Any other surface scratches? Thanks! Those drivers (K-1083-SV) pop up on the used market time to time for and average about $70/driver. All cabinets are in a great shape. Quote Link to comment Share on other sites More sharing options...
haydukej Posted June 11, 2020 Author Share Posted June 11, 2020 bumping this again for price drop. Thanks all Quote Link to comment Share on other sites More sharing options...
_NERD Posted September 19, 2020 Share Posted September 19, 2020 What a great setup. Still firm on no shipping? I’ve shipped the RSW-15 before without incident. Quote Link to comment Share on other sites More sharing options...
Iteachstem Posted September 20, 2020 Share Posted September 20, 2020 On 6/7/2020 at 11:44 AM, opusk2k9 said: On 6/6/2020 at 5:33 PM, DTO said: Shame about the rc-7! I am actually looking for one and the only two I’ve seen lately are this one and one in Ohio ($200), both with about the same damage. Here are come replacement woofers: https://offerup.com/item/detail/887573806/ Those were my drivers, but they are sold! It's getting more difficult to find those original drivers(rf-3/rf-5/rc-7/rf-35/rf-82, etc) I bought a set of rf-3's a little bit back and they had 2 damaged cones, so, I thought I would replace all 4 because I didn't want to wait forever for 2 of the original style ones, so I bought new ones ($69 ea.) from here.... https://www.simplyspeakers.com/klipsch-replacement-speaker-woofer-1011974.html Unfortunately, like everything else right now, they are out of stock. But, if they do come back, they are great. (They are genuine klipsch speakers, still made in china of course, but the name is molded into the frames) They have different dust-caps, thus why I bought 4 so that they would all match. I attached my pics so you can see the difference in appearance... I hope this helps. Quote Link to comment Share on other sites More sharing options...
haydukej Posted September 30, 2020 Author Share Posted September 30, 2020 On 9/19/2020 at 12:23 AM, _NERD said: What a great setup. Still firm on no shipping? I’ve shipped the RSW-15 before without incident. Yeah I asked him again and he's not keen on the idea. It'd be over 300 pounds for the whole system not to mention the size. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.