Ceedog Posted April 11, 2001 Share Posted April 11, 2001 Anyone have any advice on how to tame the highs and massage a little more mids out of a pair of klf-30's? I am driving them with an Integra DTR-7.1. It just seems like these speakers should sound a little better than they do. They are positioned about 6' apart and about 10" from the wall with a slight inward angle. Any input would be appreciated. Quote Link to comment Share on other sites More sharing options...
rowooo Posted April 13, 2001 Share Posted April 13, 2001 Ceedog.....How far away is your listening position? Moving the speakers a few inches further from the back wall "in my opinion", isn't going to make much of a difference in you problem area. Now your lower frequencies might tighten up a bit, but your asking about taming the highs and improving your midrange. I'd suggest looking at some different interconnect cables. Most higher end stores will loan pairs out for trials. I don't know what your using for interconnects now, but that might be a quick and easy fix to your problem. I highly suggest Transparent Audio cables. Nothing I have ever done to my system made such a dramatic improvement than just swapping in those two pairs of interconnects. Good Luck Quote Link to comment Share on other sites More sharing options...
pzannucci Posted April 15, 2001 Share Posted April 15, 2001 In the KLF-30's, it does seem that the tweeter is a little louder than the rest of the system. I built an L-Pad out of resistors to drop the output a few db. You might want to try it to lower the output of the tweeter a little. Peter Z. Quote Link to comment Share on other sites More sharing options...
JohnA Posted April 15, 2001 Share Posted April 15, 2001 CeeDog, How "hard" is your room? Have you considered heavier drapes or a throw rug to deaden the room? John Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.