GeorgeV

I have seen the RF-7's go for as low as $1700 from authorized Klipsch dealers and online for $1500. However, you will not get the 5 years warranty from Klipsch if you purchase these speakers online. I know that one of the members' Dylan is selling his RF-7's and is asking $1250.

Coax is better.

How about $200 and I'll pay for shipping. If anyone is interested please send me a message. Thanks.

I agree with Bill, you need to empty your Quarantine folder. Otherwise, the files will remain on your hard drive.

---------------- On 2/15/2005 2:53:14 AM DrWho wrote: The crossover on the RF-7 between the woofers and the horn is at 2200Hz which is insanely high for a 12"; driver to achieve. Some might even argue that a 10"; driver is a bit on the large size too, but Klipsch gets away with it because of their fancy cerametallic cones. You'll notice that the KLF-30 crosses over at 800Hz. Then at 32Hz, it's not like the RF-7 isn't digging low. There really aren't that many subs that will give you bang for the buck extension down below 30Hz anyway. ---------------- Valid point, I didn't consider this.

I think gcoker is right. Receiver technology changes much more quickly then speakers do. Today DD & DTS are in, tomorrow it will be something else. A good pair of speakers can last 20 plus years. Heck, khorns are 50 plus years old and are still regarded as one of the best sounding speakers ever made. I would recommend that you at least demo the RF-7's. The RF-35's are good but just can't compete with the 7's.

Thanks for the responses. Yes, I have thought about the KLF-30's. Which is one of the reasons I posted this question. If Klipsch has plans for a dual 12 inch reference line, that will be my first choice. After this the 30's will be my second choice.

You can look on the outside of the shipping box for the date shipped. That will give you a good indication of the manufacturing date. My RF-7's, RC-7 and RF-35's had a sticker with this info.

Thanks for the answer Dean.

Congrats on the upgrade. It sounds like you have just experienced the RF-7's ability to dip down to the 3 Ohm region. I think most RF-7 owners will agree that you need a SS amp with at least 200 per channel into 8 Ohm to drive these speakers for HT. I use an Acurus A250 as my amp. A lot of members like the Sunfire and Rotel Amps. Aragon is another good amp to try.

Remember the MS spyware program is in Beta release right now. MS will release the final version only to paying customers (i.e. it will not be an OS upgrade that is free to download). Thus, the beat version will be useless soon without new DAT files.

This question is primarily for the site admins. Has Klipsch every thought of designing a Reference Series speaker with dual 12 inch woofers as an upgrade to the RF-7's. I know the Reference Premiere Series is set to debut sometime this year and it will be a 3-way design. But, from what I have read it will use dual 10 inch woofers as well. I would be very interest in the dual 12 inch design, since I like deep rich bass in my music. I know I could add a sub woofer to complement my RF-7's to achieve the same results. Possibly a 12 inch woofer design is not feasible; it may cost too much to manufacture, the cabinet may just be too large and heavy or there may not be a market for it. I would be very interested in an answer from Klipsch. Thank you.

---------------- On 2/10/2005 5:55:03 PM codmaster wrote: The dealer told me that the RF-7's should be burned in/played for a least 100-150 hours before I can expect the correct; sound image. No biggie, but I would like to hear from other RF-7 owners on this issue. cheers ---------------- I have about 70 hours of listen on my RF-7's now and I think they sound better with each passing hour. One thing to look at though is the foam inside the bottom of the speaker. Look into the port hole at the back of the speaker and check to see if the holes are blocked by the foam. If it is blocked, follow the this procedure: The foam should make a "L" in the bottom of the cabinet. It should be "tucked" between the port and the bottom of the cabinet. Then turn the corner and go up the front of the cabinet, stoping just short of the lower woofer. If it is covering the port, just stick you hand in the port and push it back in place. As long as it is not covering the port it is ok just about anywhere in the cabinet. If you want to glue it you can, it is ok.

---------------- On 2/13/2005 3:08:49 AM teagster wrote: I am unsure whether this means I should build slowly and go for the matching RC-35 and RS-35's as well rather than match the RF-35's with RC and RS-25 counterparts. Any thoughts on this? ---------------- Definitely go for the matching RC-35 and RS-35's. One of the most important aspects of HT is to have matching speakers especially across the front. My advice would be to build your system slowly and purchase the better equipment as you can afford it. One of my mistakes was to buy the complete 5.1 system on my limited budget at the time. I was never happy with the system and I have spent a lot more money now upgrading everything.

Teag, You are definitely better off with the RF-35 system without the sub for now. When you save the necessary cash purchase the RSW12 sub to complete your HT. I have listened to this system and I think you will be happy with it as well. However, if you catch the audio bug, you will not be satisfied until you upgrade to the RF-7's.

Joe, you are getting confused between the Legend Series (KLF C-7) and the Synergy Premiere Series (KSP-C6).

Here is another pic with the front grill.

The center channel was purchased in March 2000 from Audio Empire (an authorized Klipsch dealer). I would say they have had light to medium use (approx. 3-4 hours per week). They have only been powered with one amp (Acurus 200x3). I do not like to listen very loudly to music, so I never jack the volume. The speaker were used up to Jan 28 2005, this is when I purchased the RC-7. The speaker is in excellent shape. No nicks, scratches or rips of any kind. Please see the attached pics. I Am asking $200 plus shipping. I have the original box and manual that I will include. Please send me a message if you are interested.

Hi Bill, that was me that noticed the form at the bottom of the RF-7's. I don't know what the correct answer is but I like the foam to be pushed to the bottom. I feel that it really opens up the bass. Since I listen to rock and alternative music the bass info is important.

Thanks Bill, you echoed my thoughts.

I have an older SW12 II sub that I haven't used in awhile. So I hooked it up and watched The Lord of the Rings - The Fellowship of the Ring DVD. The sub integrated very well with my RF-7's RC-7 and RF-35's and provided enough bass that you heard and felt it on the upstairs floor. Anyone have both the SW12 II sub and the newer rsw-12 or rsw-15 sub. Is it worth upgrading to the rsw-12 or rsw-15 sub or should I just stick to what I have? Thanks.

If your system will solely be for home theater, then the 2 most important aspects are the center channel and sub. However, depending on your budget you will need to build your system in pieces. Therefore, to start buy a good pair of front speakers, the RF-35's are a very good choice. Next get the matching rear speakers and after that look for a good center channel either the RC-35 or RC-7. Lastly, once you have the budget buy a good sub. Dont rush out and purchase the whole system on a limited budget, instead invest in better speakers and build the system slowly. You will be happier in the end.

I would look at the RF-35 system without the sub. I think this system will give you what you are looking for, a detailed sound stage without overwhelming bass. The RF-35s are strong in the bass region, so they should help your amp not sound too bright. However, if you could either demo the speakers at home or bring your amp to the dealer before for a listen before you buy.

I'm not sure if anyone has noticed this or not. But, when I first hooked up my RF-7's the bass seemed muffled. I looked into the port holes at the back of the speakers and I noticed that the acoustic foam at the bottom of the speaker had come loose and was blocking the port holes. I pushed it back along the bottom and to the front side of the speakers and the difference in bass was huge.

I agree with the prevous 2 members. If you have the space and money go for the RF-7's, you will be glad you did.