Brac
-
Posts
1621 -
Joined
-
Last visited
Content Type
Forums
Events
Gallery
Posts posted by Brac
-
-
- Designed and Engineered in the USA---- Heritage not being made here anymore?
-
How far north are you, If I had that drive here in Maine I would consider putting radiant heat piping under it.
-
Just be sure to be careful with the passives on the back, they can be really hard to replace
-
I'm in Dexter, I've bought some great speaks for little of nothing cause there just isn't a market in Maine.
-
What a mess, sounds like the guy that did the repair didn't do you any favors. Of course this amp is all but new so Mc isn't blameless either, knowing what a guy spends for one of their amps this is totally unacceptable. They better go above and beyond for you this time.
-
On 2/6/2018 at 12:38 PM, Cantilope said:
I think that you ought to try a build. You'll never go back...
Was this all started with a kit, or a shopping list? -- I guess I jumped the gun with my question, as I see from further post that it's some of each. I did not see a link to a kit.
-
5 hours ago, toulcaz said:
Do they have to be setup in the corner of a room?
Unless you build corners for them.
-
My Nemesis, the elusive Kingfisher.
-
4
-
-
.
in Garage Sale
This isn't the grills I thought they were. How do I delete a post?
-
.
in Garage Sale
Had had these for a while, no badges but decent shape. Take $20 plus actual shipping from 04930
you know what they look like
-
I have done some, spray pait and I discarded the cloth. Worked very well.
-
The curly grain is beyond awesome.
-
7 hours ago, colterphoto1 said:
I don't think so, because both networks would have an output to Woofer, only on the splits you send it back to the second set of 5-way posts instead of directly to the woofer itself. Where it gets tricky is the separate fuse for the woofer section. Follow the signal path grasshopper.
So now that I have working parts on the bench, I gotta ask. I used a single 1/4 mono to drive one speaker, but it has 2 1/4" mono inputs that are parallel. when would you want to parallel
your inputs?
-
Have a stack of parts on the workbench all playing music. HOORAY!
-
1
-
-
I think I found some ZEN by following the signal path (like a good grass hopper). One question that will tell me if I have it right. Does the HF fuse go only to the squaker?
-
So, just got back into messing with these, and I'm at a total loss. The pics of the split cups CECAA850 posted have 2 pairs of wires coming off the cup/backplate. These that I have (could certainly be messed up) have 4 pairs of wires coming off. Anyone have a full schematic for LS splits?
A couple other things I've noticed which may be a clue. The networks I have are "AA" there is no "s" stamp so could the extra wires be solving something?
In this pic, I was trying to place wires where they go, and things are obviously not right. I feel like the tweet and squak should attach direct to the XO, which would then leave bass and input from the cup.
-
Sounds like a plan, I'll leave one together and what the parts are will be more clear when they are in hand, I'm sure.
-
13 hours ago, CECAA850 said:
Which parts? The caps are available. Those were a couple pair I cleaned up and rebuilt for my brother and son in law.
The connection parts that go through the backplate.
Those look much bigger than mine, I guess the networks go inside the HFsection only on the Industrials?
-
That should help, Thanks. Are those parts available, mine aren't the cleanest I've ever seen.
-
Other side of the backplate
-
A good long time ago I picked up a set of split Industrials, and I am finally getting back to them. Looking at the back plate, I'm not 100% sure what wires go where.
Hoping someone has a diagram.
Thanks
-
Need to replace the foam surround, no gluing that
-
Will do, as to the other questions I had thought it didn't work at all but my memory isn't what it used to be. I'll hook it up here right soon and verify what it does and doesn't do.
-
So 5 years ago, I did up 2 sets of networks, 3 of the 4 worked just as they should. I of course checked and rechecked all connections, and it is built correctly. This one should be in my loaner La Scalas that have done many a friends wedding, but for 5 years I have just looked at it spitefully. I have a fluke 87 is it possible to trouble shoot one of these without a scope?
Klipsch KL-6502-THX as surrounds w/Forte Fronts?
in Architectural
Posted
My dedicated HT got turned into a workshop for a business, so I've been thinking about getting 5.1 in the living room, and really my only option is gonna be inwalls. I find very little in the way of reviews for the KL-6502's Wondering how the sound and how they would mix with Forte's and/or Heresy's