Jump to content

japosey

Regulars
  • Posts

    548
  • Joined

  • Last visited

Everything posted by japosey

  1. Bump Sent from my iPhone using Tapatalk
  2. Up for sale is a vintage Pioneer receiver. The unit is in good working condition and was just serviced (see receipt for details). I’ve owned this unit for 15 years. I had the on/off switch bypassed due to a noisy switch that could not be serviced or replaced given the scarcity of the part. This does not impact the a b speaker selector. I believe the unit is rated at 35 x 2. $300 Sent from my iPhone using Tapatalk
  3. Price reduced to $260 Sent from my iPhone using Tapatalk
  4. Denton, TX Sent from my iPhone using Tapatalk
  5. I have a mint pair of CF2's. The speakers look and sound amazing. I picked them up locally and I'm tempted to keep them myself given their condition. You would be hard pressed to find a blemish. The veneers are just gorgeous. I'm asking $550. Shipping will be quite expensive given the size and weight of the speakers, but it can be done.
  6. Legendary B&W ASW 1000 Sub. Good condition. No dents or dings. 12” driver is in good condition. Works great! $260 plus shipping Specifications Type: single driver subwoofer Frequency Response: 40Hz to 140Hz Crossover Frequency: 40-140Hz Sub Bass: 1 x 300mm cone Enclosure: 70 litre, bass reflex Grille: black cloth Finish: black ash Dimensions: 460 x 540 x 500mm Weight: 30kg Note: 120 watt power amplifier Year: 1997 Sent from my iPhone using Tapatalk
  7. Up for sale is a very good condition AM/FM Tuner from the 1970’s. It’s in near perfect condition. Real wood veneer is in excellent condition. Works great! The pic shows the signal strength lamp out. I’ve ordered a new bulb and will have it installed prior to shipping. No issues other than that. $100 plus shipping. https://community.klipsch.com/uploads/monthly_2021_06/01212_c9KpbP2WUYJz_0jm0ew_1200x900.jpg.7d751f858331b526a52901788a65b4ff.jpg
  8. Do you need the entire tweeter assembly with the motor, diaphragm and horn? Or, do you need just the diaphragms?
  9. Why not use one of these Dynamat solutions? https://www.dynamat.com/products/dynabox/ https://www.dynamat.com/products/enwall/
  10. Here is a guy who seems to focus solely on Yamaha amps http://legendaryamps.com/
  11. I'm sure you can find plenty of repair shops to repair the Yamaha. Plus, given its age it may be a could time to recap it.
  12. If you do need repair some day. You might contact these guys who look to still repair Velodynes. https://www.ebcelectronics.com/velodyne-repair.php
  13. What's weird is the emblem still is there. It's just the copper that has been rubbed/removed from it.
  14. I have a pair of RF3 II’s and an RC3 II center speaker for sale. These have been owned by my in-laws since 2003. They are in good condition. I noticed one broken grill before on one of the floorstanders and the copper on one of the emblems has rubbed off. I would keep them if I had a place to set them up. Willing to ship. Asking RF3 $300 OBO RC3 SOLD Sent from my iPhone using Tapatalk
  15. I have really nice used Aventage receiver. 90x7. Comes with remote control and power cord Sent from my iPhone using Tapatalk
  16. Nice used receiver. $200 shipped to continental US https://ca.yamaha.com/en/products/audio_visual/av_receivers_amps/rx-a720/specs.html Sent from my iPhone using Tapatalk
  17. I have this used Luxman stereo Tuner/Amplifier. The unit is in good condition. M/FM Tuner-Amplifier A new (in 1981) budget tuner amplifier. Computer Analyzed Tuning (CAT) system establishes the optimum receiving condition automatically. Amplifier section employs the Duo-Beta Circuit for improved audio performance. Features: Flasher Tuning System Indicator In case of FM reception, this indicator shows the direction of tuning. When a broadcasting station is coming near, the indicator begins flashing. Turn the tuning knob slowly to the direction shown by the indicator, and the flashing ceases at a point where the precise tuning point is obtained. At this time, the indicator shows the signal strength of the station just tuned in. When 3 or more indicators light up, stble reception in stereo mode is feasible. C.A.T. off Switch Thanks to our innovative C.A.T. (Computer Analized Tuning) circuitry, this tuner-amplifier always provides an optimum reception according to the ambient conditions. Specifically, the anti-birdie and noise canceller circuits are sensing the electric field strength, interference by other stations, etc. Specifications: Audio Section Power Output: 35 W (minimum continuous per channel both channels driven into 8 Ω with no more than 0,03% Total Harmonic Distortion) Rated I.M.: no more than 0,03% (8 Ω, 35 W/ch, 60 Hz :7khz = 4:1) Frequency Response: 10 Hz - 70 kHz (±1 dB) Input Sensitivity/Impedance: Phono ; 2,2 mV/50 k Ω Monitor : 150 mV/35 k Ω Phono Overal Voltage: 150 mV Signal-to-Noise Ratio: Phono : 77 dB (IHF-A weighted, 5 mV) Monitor : 102 dB (IHF-A weighted) Residual Noise: 0,5 mV Tone Controls: Bass : +7 dB -10 dB at 100 Hz Treble : +7 dB -10 dB at 10 kHz Filters: Subsonic : 30 Hz (6 dB /oct) High Cut : 7 kh (6 dB/oct) Crosstalk: 70 dB ( monitor at 1 kHz) Loudness Control: +8 dB at 100 Hz ; +7,5 dB at 10 kHz (loudness control max. VR: -30 dB) FM Tuner Sectio Usable Sensitivity: Mono 10,3 dBf (1,8 µV) 50 dB Quieting Sensitivity: Mono 14,8 dBf (3,0 µV) (50 µ sec) S/N Ratio at 65 dBf: 82 dB Muting Threshold: 3 µV Frequency Response: 30 Hz - 15 kHz ±1 dB Distortion at 65 dBf; MONO 100 Hz : 0,15% 1 kHz : 0,12% 6 kHz : 0,3% STEREO 100 Hz : 0,2% 1 kHz : 0,2% 6 kHz : 0,3% Capture Ratio at 65 dBf: 1,5 dB Image Response Ratio: 55 dB IF Response Ratio: 90 dB AM Suppression Ratio: 60 dB Stereo Separation: 42 dB (100 Hz), 48 dB (1 kHz), 42 dB (10 kHz) Spurious Response ratio: 80 dB Alternate Channel Selectivity: 65 dB (±400 kHz) SCA Rejection Ratio: 60 dB AM Tuner Section IHF Usable Sensitivity (1 MHz): 500 µV /m (loop antenna) Image Response Ratio (at 1 MHz): 45 dB Signal-to-Noise Ratio: 58 dB Distortion: 0,5% General Section Power Supply: 110, 120, 220 - 240 V 50/60 Hz Dimensions (W x H x D): 438 x 85 x 384 mm (17,5" x 3,4" x 15,4") Weight (Net): 7,7 kg (17 lbs) Sent from my iPhone using Tapatalk
  18. I assume the first run sold out fairly quick. So, if anyone knows if we can pre-order the next run please let me know!!! I might order a pair
  19. I really like the HGS-18 that I have. Other than DSP it still performs with all others in terms of output, low frequency extension and low distortion. The DD or DD+ series will add the DSP function. If I were you, I would also consider the JL Audio products. They are on 13.5" subs, but they are amazing.
  20. japosey

    Yamaha RX Z1

    I have a 1020 and it sounds fine. Not real powerful, but it does fine at normal listening volumes. The RX-Z1 is a great, but dated receiver. It is extremely powerful, especially in 2 channel mode. It will rival affordable separates in the same price range.
  21. Good little center that works perfectly. There are a couple of snags on the edge of the grill and a few light scuffs/scratches in vinyl from being moved around. Shipping will be determined by zip code Sent from my iPhone using Tapatalk
  22. Up is used RSW-10 in good condition. It’s a 10” with a 10” passive radiator and a 385 watt amplifier. One tab on the grill is broke off. Shipping will depend on location. Sent from my iPhone using Tapatalk
  23. Looking for an RC-35 if anyone has one.
×
×
  • Create New...