AHall

I look forward to getting these up and running.

Maybe when I refinish the cabinets I’ll add a window brace to stiffen up the cab and integrate a driver brace to it. These will eventually have radian drivers in them to match the rest of the system.

From what I’ve read the k510 will perform down to around 500hz. It will not go low enough to be a viable option on a khorn bass bin which would need 400-450hz crossover. Something about collapsing polars etc. I haven’t quite grasped the meaning of all that. You would need someone like Roy or Chris to step in to give the science behind it. Regarding the driver I believe the horn can extended the low and high freq capabilities. I base that on my minimal experience with jubilees. Neither k691 or radian 950 drivers that I have tried are rated for 450-20khz, but they perform it when attached to the k402.

I’ve had great luck crossing over the 510/heresy combo at 600hz. The heresy doesn’t have a problem keeping up with good peq using rew and the xilica. I think it’s important that you have good supporting gear to pull it off.

Thank you sir. Any opinion if they should be mounted in the standard atmos position or they should be adjusted for the dispersion pattern? I have 9ft ceilings in that room.

Got some more work done. Haven’t had a chance to hook them up and set up the crossovers. I wasn’t planning on having biamped surrounds, so I still need to run a second wire in each wall.

From my experience audiophile is usually associated with snobbish behavior. Lots of turned up noses and scoffing. Classifying cheaper pieces of gear or brands as midfi. They consider their ears special or golden. I think it helps them justify wasting money on high end cables and overpriced gear. And when your normal ears can’t hear the difference it is only because your system is resolving enough. Not my cup of tea at all. I like this place because most everyone is very down to earth. And their knowledge is vast.

E type crossovers $80 sold Single k22k $80 K77 tweeters $100 K700 mid horns $100 sold plus ride

And lastly I’m short 3 channels of amplification with only having the anthem 2ch and anthem 5ch amplifiers for the system. Excluding the k402s that is, I’m still using my tube amp for them(for now anyway). Biamping sure does eat up some amp channels and rack space. So to conserve rack space, for my future upgrade list, I’ll be replacing the 2ch anthem with my newly arrived Sunfire cinema grand 5ch. I’ve read it is a great amp. I expect so being a bob carver amp.

This is the project I will be doing when I get home from work next week. Im thinking this will be an excellent upgrade for HT theater use. And an even more dramatic upgrade for when I start going down the sacd/multi channel critical listening road. I picked up a second xilica. This time a xp2040. It will allow me to run the Cornwall surround active and biamped. Same way as I have been running my center channel and jubilees.

The k510/radian combination was a much bigger upgrade to the system than I expected topping my heresy. No more dialogue boosting or adding spl to the center speaker to make out what they saying in movies. This is the little heresy that could now! Im eager to have the aesthetics of a belle of up front. And even more eager to have a fully horn loaded pro series front stage.

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F323822244971 https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F323822252370

Care to elaborate? I’ve looked at the dispersion patterns from the website. Not 100% sure how that will apply to my room.

All components still available. Make offers

Sold

All still available. Make offers

I guess I’ll be the first to try these.

Maybe add $10 for shipping and I’ll cover the rest.

K601 horns with k57 drivers 230-sold Crites Ct125 125-sold B3 crossover recapped with sonicaps $130

Local pickup. Western Colorado. Forte 2’s available. In great shape. Cabs have some minor scuffs/markings $600

Stock diaphragms 30 Crossover kit 60

These components are from 1968 klipschorns. Everything is in very good shape. Crites components had minimal use less than a year. Price plus ride. K400 horns 300 K55v drivers 200 K77 round magnet 150 Stock “A” crossovers 150 A55g 300 Ct120 200 Crites “A” crossover 175

Do you have a link to this thread?

Does anyone have any experience with these? I’m thinking they would be the best match for the rest of the pro gear in my living room. I wonder if I would have to be less spread out than Dolby recommends because the tighter dispersion pattern. https://f072605def1c9a5ef179-a0bc3fbf1884fc0965506ae2b946e1cd.ssl.cf2.rackcdn.com/product-specsheets/IC-800-T-Data-Sheet-v04.pdf