michaelwjones

No, reality. I assure you I know & can hear the differences between my 300B, KT88 and SS amps. It ain't rocket science; it's listening.

OMG! and its "low stock" to boot. Must have been a run on them!

I'm waiting for the less expensive LB100... 😂

That was my first thought so I double checked all the connections & they are "properly" connected: R to R and L to L. That's why I asked about others listening to "So What." Perhaps the "new to me" SS amp has its internals reversed. I have not had a SS amp in my system in heaven knows how long. Or perhaps just the amp shifting the soundstage based on its design; it's subtle but very noticeable to me.

Dumb question and I think I know the answer, but would someone please listen to "So What" on Kind of Blue and tell me which toward side Miles tends to be standing? He's been toward the right on my tubed pre/amp set up, but I plugged in a SS amp and he moved to the left. I have an integrated placing him toward the right, so which on side does anyone else have him? Thanks in advance.

"Sweet" is a good way to describe its sound. It has enough power to deliver the bass yet the mid & upper registers are open & delicate. When it's gone, I'll miss it; but like Shakey, I just have too may irons in the fire at the moment.

https://www.usaudiomart.com/details/649837539-klipsch-rebel-corner-horn-unloaded-cabinet/ Any one need a real project?

Who'd thunk? https://forum.audiogon.com/discussions/audiophile-circuit-breakers and "cryo'ed breakers. Cryo'ed seemed to make a more relaxed presentation of the music. " Why hasn't the Forum pointed all this out to me?

This is a reason Shindo sounds good (to some); open it and it looks pretty mundane. But it is the right part for the right application; synergy.

I was with you until this. The electrons mess with the directionality of the cable? And no, his friend is being an idiot. He was fooled with the ground rod; where do you think your house ground ultimately terminates? A ground rod outside your house as well as at the power station.

Can you tell I'm moving away from headphones? A very nice sounding tubed headphone amp. -Transformer coupled or transformerless (OTL) output -Two inputs: one miniplug and one RCA. -Two front headphone jacks -Polarity switch on the power supply (IMHO, no sonic difference) -Separate power supply with selectable polarity inversion -Tubes: 2 EL84 type, 1 12AX7 type (currently Sovtek & JJ Tesla) There is a selectable feedback switch on the rear of the unit which is always on, but momentarily selectable to off. Again, I have never heard any sonic difference. The difference between the OTL and transformer-coupled is obvious: with the transformer setting, bass loses fullness and the treble becomes slightly harsher; the music becomes more “aggressive.” Switch it to OTL and the sound becomes warmer and more natural, with slightly less gain. The are no sonic issues and it is a delight to use with its adjustable settings. There is a bump to the upper left faceplate. It is deceivingly heavy due to its transformers; the power supply weighs three pounds and the head unit about seven. $250 including shipping to you in the lower 48. Please email any questions. Thanks. Mike

I triple dog dare you to post this statement on an Audiogon forum! Sorry for the breech of dog dare etiquette.

and they look nice! https://www.audiogon.com/listings/lisai4f7-klipsch-belle-full-range

Price drop: $275 including shipping in the lower 48.

The ball may be deformed, but your barrel is in serious need of cleaning. Try this: https://www.zoro.com/flex-hone-tool-bc214120ao-flex-hone-2250-572mm-bore-8-oal-120-grit-aluminum-oxide-ao-bc214120ao/i/G9933281/?recommended=true You'll need to rig an 18" extension to chuck it into your drill, but after you hone the cylinder wall, vacuum it out, coat the walls with cutting oil (ensuring the ball is lubed as well), let it soak, and then try loading a primer and few grains of powder. Then as we say in the south: hold my beer; what's the worst that could happen? But seriously, that bore needs to be smoothed & descaled.

Oh, I think there are more than a few around: https://www.armiesoftn.org They may be able to put you in touch with an artillery squad in your area. I know there used to a fair contingent of re-enactors around Cookeville. I'll wager Georgia has a gray army as well. Northern states, not so much...

It's been so long, I forgot I used that as well. Great stuff.

Finally found some specs on the unit: Class A, triode Output power: 14 watts x 2 channels. Extended frequency range C-core audio output transformers. Specifications: Vacuum tubes: 2A3 x 4, 6SN7 x 2, 12AU7x2. Output power:14w x 2 channels. Input sensitivity:480mv. Input impedance:100kΩ . Harmonic distortion: <0.05%. Frequency response: 8HZ-65KHZ -1dB. S/N ratio: 90dB.

Fully differentially balanced, the CAD-120S MkII offers both RCA single-ended and XLR balanced inputs to match any associated equipment. Front panel meters continually monitor the bias current to the tubes. A huge power supply provides plenty of current storage to handle the peak demands of music. It can be switched on the fly from triode mode (Class A) at 60 watts per channel to ultra-linear mode (Class AB) at 120 watts per channel. The unit has no sonic or cosmetic issues. The Gold Lion KT88 have about 200 hours as do the upgraded GE “glow dome” 6SN7s. The switches and all contacts were just cleaned. This unit was sent to Cary and upgraded from a MkI to a MkII. All changes were made but the face plate was not changed, an expense that would add nothing to the sonics. Correspondence from Cary confirming same is included. Includes manual, power cord and original packing from Cary. $2500 plus shipping which will be pricey due to its 65 pound weight. Figure $100 to $200, depending upon distance from middle Tennessee. Free local pickup is fine. Please email any questions. Specifications: •Power Output: Ultralinear – 120 watts per channel. Triode – 60 watts per channel •Inputs: XLR balanced & RCA single-ended •Noise and Hum: -80 dB •Input Impedance: 100K both RCA and Balanced •Frequency Response: 17 Hz – 25 KHz flat @ 1 watt •Tubes: 2 – 6SN7 input gain stage 2 – 6SN7 driver tubes 8 – KT 88 output tubes •Gain: 28dB •Sensitivity: 1.24v •Power Supply Capacitors: 4 x 560µF •Finish: Anthracite black chassis with silver aluminum faceplate •Weight: 65 lbs •Dimensions: 8″ H x 17 ” W x 14″ D Cary 120.pages

Push-Pull. Right now its running my 85dB efficient Technics SB-C700 loudspeakers quite nicely at 10:00 on the volume control. It sounds wonderful on La Scala IIs & Harbeths as well.

...

You know you have too much stuff when you cannot find anywhere other than the floor to place a piece of equipment… time to move some things out. Raysonic was a company designing in Canada with product manufactured in China. It is an uncommon model offered by Raysonic running a quartet of 2A3s in push-pull triode mode putting out 14 watts. This beast is all transformers tipping the scales at 72 pounds. This was the den system, not my main listening system. It sounds amazing and works perfectly. There are no sonic, electronic or cosmetic issues of which I am aware. This unit is 9 out of 10 cosmetically and looks new from the front. There is a very small paint scratch on one of the transformers and some light swirls in the transformers’ paint finish. It will work with relatively inefficient speakers due to its power output. The amp comes with the original Raysonic 2A3 tubes which are still strong, upgraded NOS 6SN7 tubes and NOS 12AU7 tubes. There is no owner's manual, but it includes the full functional remote. It will be shipped inside the original worn but secure triple boxes. The tubes will be shipped in a separate box. $1000 plus shipping to you which will be pricey due to its 72 pound weight. Figure a minimum of $100 and closer to $200 to the West coast. Free local pickup is fine. Please email any questions.

I looked at the picture again and noticed the meter appears to be screwed to the chassis, not glued on like the 275. That's probably a good sign as is the change to, IMHO, a "realistic" finish. We'll all be awaiting your thoughts.

Grindstone has the right idea: figure out how much libation supply you have and call some buddies to get it tipped. I mean, when was the last time your buddies got to say "Hold my beer & watch this" around a cannon?

Any chance of standing the barrel onto its muzzle after you liberally apply penetrating oil inside the barrel & behind the ball? Time and gravity may work.