Cpt_John Posted January 21, 2009 Share Posted January 21, 2009 I am creating a home theater and have available to me a couple of KSP-C6 center channel speakers. In a previous post I was told that they would be a pretty good option as side surrounds in a 7 channel setup. I was also considering using them as dual center channel speakers. I am planning on at least temporarily using my old KG4's as front left and right speakers. My questions are: 1. Do many people use more than one center channel speaker? (They would be under a 120" projection screen). 2. Would I be better served to use them as dual center channels, use a single one as a center channel, or to use them as L/R surround speakers? 3. If I did use them as center channels would they match up adequately with my KG4's across the front or is there a much better Klipsch center channel recommendation to use? Thanks, John Quote Link to comment Share on other sites More sharing options...
Moderators Youthman Posted January 21, 2009 Moderators Share Posted January 21, 2009 From what I've read, it's not a good idea to use two center channels. I do not know the physical problems this creates but just read it somewhere here in the forums awhile back. I think Colterphoto1 was the one who gave a pretty good explanation of why not to do this. Quote Link to comment Share on other sites More sharing options...
tommyboy Posted January 21, 2009 Share Posted January 21, 2009 I also asked the same question. Everyone said not to try it, but I did anyway. Didn't like how it sounded at all! Maybe if there was like 20 ft between your left and right mains, then it might work............... Quote Link to comment Share on other sites More sharing options...
Eskimo1 Posted January 21, 2009 Share Posted January 21, 2009 You would create all kind of comb filtering problems by using 2 centers. I'm using my old CC and another matching one I bought as my rear surrounds. If you can, dipole side surrounds work really well, as opposed to direct-firing speakers. Quote Link to comment Share on other sites More sharing options...
Moderators Youthman Posted January 21, 2009 Moderators Share Posted January 21, 2009 You would create all kind of comb filtering problems by using 2 centers. That's the term I remember reading about. Thx Eskimo. I figured someone knew why it is a bad idea to use two centers. Quote Link to comment Share on other sites More sharing options...
Groomlakearea51 Posted January 21, 2009 Share Posted January 21, 2009 It can be done, but they need to be next to or close each other, and generally will work best in a small room, in a "nearfield" listening environment with low SPL's (relatively). Best combination I have found is to use a separate amplifier for that configuration and then match the volume levels to fit the source, environment, etc. I do it with Khorns and Belles in one room and Khorns and LaScala's in another. But... when experimenting with with Cornwalls, Heresys, Chorus and Forte combos in a "dual" configuration, it did not sound right due to the filtering issues which became evident at any appreciable volume (SPL). Lot of factors involved, but IMHO, if one wonders... one should try it and see how it works (or does not...) then decide to keep the configuration or not. It's always fun to try things and see what the effects will be. Quote Link to comment Share on other sites More sharing options...
wuzzzer Posted January 21, 2009 Share Posted January 21, 2009 I don't know, I think if dual center speakers were a good idea surround sound receivers and companies who make them would have jumped on that bandwagon a long time ago. There's a reason why there's only one center speaker output on 99.99999999999999999999999999999999999999999999999999999999% of them. Quote Link to comment Share on other sites More sharing options...
Groomlakearea51 Posted January 21, 2009 Share Posted January 21, 2009 I gues that's why it's called a "center" rather than "centers"... LOL!!!! Seriously though, since a center is "on axis" as far as placement, there is normally no consideration for multiples. You don't normally see horizontal line arrays in home use (much...); Or multiples in a vertical array either for that matter.... Quote Link to comment Share on other sites More sharing options...
flaming eye Posted January 21, 2009 Share Posted January 21, 2009 I`v done it & it worked really well but I have since gotten a proper matching center which of corse is way better & for the KG line the KV-2 or 3 are the once you want for center duty Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.