HOGFAN Posted February 1, 2012 Share Posted February 1, 2012 What type of crossover is used in the Cornscala? Could I use/modify a AA crossover? Thanks for your input. Hogfan Quote Link to comment Share on other sites More sharing options...
Guest David H Posted February 1, 2012 Share Posted February 1, 2012 You can use some of the parts from an AA for Cornscala, however I reccomend ALK's Cornscala crossover. Dave Quote Link to comment Share on other sites More sharing options...
HOGFAN Posted February 1, 2012 Author Share Posted February 1, 2012 Since I will be using the Cornscala (single) as a center between La Scala's, which have AA crossovers, which crossover type should I use in the Cornscala to give me the best match for the application? Would the ALK still be the best route? Thanks, Hogfan Quote Link to comment Share on other sites More sharing options...
jhoak Posted February 1, 2012 Share Posted February 1, 2012 At the time I built my Cornscalas there wasn't anything suitable available from ALK.For my Cornscalas I built a pair of Type-B derivatives with some of the cap values changed to to accommodate my Selenium drivers. Bob Crites was VERY helpful during the design process. All of that said I'd love to try the ALK Cornscala crossovers but I just don't have the coin right now. Someday... Maybe... Till that day comes I remain very pleased with what I'm hearing. Here is what I built: Quote Link to comment Share on other sites More sharing options...
Deang Posted February 6, 2012 Share Posted February 6, 2012 Those are nicely built and undoubtably sound very good. Quote Link to comment Share on other sites More sharing options...
Pete H Posted February 7, 2012 Share Posted February 7, 2012 On the left is the crossover that Dean built for my Split Cornscala project with Crites woofer and Atlas compression driver and I used a Beyma tweeter and on the right is the stock Cornwall 2 crossover. These work great with mine and Dean did a wonderful job on them. Quote Link to comment Share on other sites More sharing options...
HOGFAN Posted February 9, 2012 Author Share Posted February 9, 2012 If I decided to build a smaller LS bass bin (on a 2/3's scale), with a 10" dirver, how would I determine what crossover to use? Is there a way of testing this to determine the crossover, or could I use an existing stock crossover....like a type AA? I am considering either a modified cornscala or a lil'scala as a center channel between my LS's. It looks like a single-bin Cornscala would be the easier build for my situation. Thanks, Hogfan Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.