bkwa1959 Posted February 15, 2020 Share Posted February 15, 2020 This was my first try at making my own room treatments, I think it turned out ok and I will get better at making my other panels. It is a lot of work and I hope it makes a difference,.I followed plans off of U-tube list of materials used 2 8 ft 1x4 cut into 4-47” pieces 4 -16.5 pcs and 6 15” pcs box of 1 5/8 screws wood glue 10 yards of fabric roll of window screen material for the back 1 down 11 more to go. 2 Quote Link to comment Share on other sites More sharing options...
H-D Rider Posted February 15, 2020 Share Posted February 15, 2020 Look`s Great . Quote Link to comment Share on other sites More sharing options...
bkwa1959 Posted February 15, 2020 Author Share Posted February 15, 2020 Thanks, I will be heading to Lowe’s to buy enough lumber to finish the other panels. Quote Link to comment Share on other sites More sharing options...
NBPK402 Posted February 15, 2020 Share Posted February 15, 2020 I used white Muslim cloth for the rear...real cheap too.Sent from my SM-T830 using Tapatalk Quote Link to comment Share on other sites More sharing options...
bkwa1959 Posted February 15, 2020 Author Share Posted February 15, 2020 Thanks I need to finish the backs. 1 Quote Link to comment Share on other sites More sharing options...
bkwa1959 Posted February 21, 2020 Author Share Posted February 21, 2020 I just finished building 10 16”x48” room treatments and my room is 12.5 x14.5 and I am trying to figure out where to put them.I have Klipschorns and I know I need some on the sides,I also plan on buying some 12” x12” foam squares to add in the corners.Has anyone added room treatments to their room with Klipschorns. Quote Link to comment Share on other sites More sharing options...
rmlowz Posted February 21, 2020 Share Posted February 21, 2020 Auralex has free room analysis software on there site. It will tell you where to place the panels. It is under the support drop down menu. Quote Link to comment Share on other sites More sharing options...
bkwa1959 Posted February 21, 2020 Author Share Posted February 21, 2020 Thanks I will check it out Quote Link to comment Share on other sites More sharing options...
Khornukopia Posted March 23, 2020 Share Posted March 23, 2020 On 2/14/2020 at 6:50 PM, bkwa1959 said: list of materials used 2 8 ft 1x4 cut into 4-47” pieces 4 -16.5 pcs and 6 15” pcs box of 1 5/8 screws wood glue 10 yards of fabric roll of window screen material for the back Do these have anything inside the frame? Quote Link to comment Share on other sites More sharing options...
bkwa1959 Posted March 23, 2020 Author Share Posted March 23, 2020 Safe and sound insulation Quote Link to comment Share on other sites More sharing options...
Khornukopia Posted March 23, 2020 Share Posted March 23, 2020 3 hours ago, bkwa1959 said: Safe and sound insulation Excellent stuff for this application. Each of my bass traps is a full bundle of ROXUL Safe and Sound still in the shrink wrap, covered with matte black fabric. A little bit heavy, but all in the interest of good acoustics! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.