dian83 Posted March 2, 2020 Share Posted March 2, 2020 (edited) Just bought nice pair of KLF20,but there are no feet, so looking to buy 8 pieces like in the pictures, moutn+caps. CF-3,CF-4 are the same feet. Thanks in advance! Edited November 16, 2020 by dian83 Found 4 need another 4 Quote Link to comment Share on other sites More sharing options...
triceratops Posted March 3, 2020 Share Posted March 3, 2020 Dian, Congrats on finding the KLF20 speakers you've been searching for! Just to clarify your question: Are you looking for the threaded receptacles on the bottom of the cabinet that are pictured in your photo? Or are you looking for feet (or spikes) that screw into these receptacles? Or the plastic caps pictured that slide over the receptacles? triceratops Quote Link to comment Share on other sites More sharing options...
dian83 Posted March 3, 2020 Author Share Posted March 3, 2020 Hi, Thanks for your questions. I am looking for complete set - the threaded receptacles+ feet that screw into the receptacles and the plastic ( rubber ) caps. The pictures in my post are from my other pair KLF20 with original feet and I just want to show what I am looking for. My new pair is with all missing feet components . I really doubt to find feet, but any similar I hope. If you have any idea I will be very thankful Dian Quote Link to comment Share on other sites More sharing options...
triceratops Posted March 3, 2020 Share Posted March 3, 2020 Hi Dian, Thanks for the explanation. I thought that was what you were saying in the original post, but I wasn't certain. I am surprised that the pictured receptacles have been removed on your other pair of KLF20's. You might also add a photo of the bottom of one of your cabinets showing an empty hole where the receptacle should be. A picture is worth a thousand words, as they say. I'm not sure the "Alerts" section is the best place for your question--maybe Technical/Modifications? Is there a thread on the KLF Legend series like there is for the Epic series in 2-Channel Home Audio? I recently purchased a pair of Klipsch Epic CF-4's and they appear to have the same threaded receptacle arrangement as your KLF20's. So if there is not a dedicated thread for KLF owners, you could post something in the Epic thread that might generate some good advice. If you haven't already done so, I would check in with Klipsch to see if those threaded receptacles might still available from the parts department. it's possible those parts were used on more than just the Epic and KLF series (maybe someone who knows can chime in). I would not call these pieces "feet" because they are intended to have feet or spikes attached to them. The thin caps that you have pictured that slide over the receptacles are also not technically "feet" even though they can serve that purpose. They are really just shipping covers to protect the threaded receptacles in transit. There may be similar caps available at your local hardware store, sold as furniture end caps. While you're waiting for a definitive solution for your missing hardware, I would put some small self-adhesive felt pads on the bottoms of your KLF's to protect the wood from scuffs and scrapes. These can be easily peeled off once you find what you need for a more permanent solution. I hope to compose a long post about what to thread into the receptacles to serve as feet for the cabinets, for folks that are missing that hardware, but I'll leave that for another time and place. -triceratops 3 Quote Link to comment Share on other sites More sharing options...
Woofers and Tweeters Posted March 3, 2020 Share Posted March 3, 2020 Check the tread size. I think that they are 1/4 - 20, but I'm not sure. https://www.parts-express.com/cat/speaker-cabinet-spikes/317 Quote Link to comment Share on other sites More sharing options...
dian83 Posted March 8, 2020 Author Share Posted March 8, 2020 Hi folks, I found 4 feet from CF-3 they are the same like the original for KLFs. So, looking for another 4 feet from Klf 20 or Epic CF-3, CF-4... See the picture, Thanks 1 Quote Link to comment Share on other sites More sharing options...
crunchman12001 Posted March 9, 2020 Share Posted March 9, 2020 The CF-3's I had were different. They had a plastic cap similar to the KLF-20's but fit over the knurled part of the foot instead of screwing into the bottom nut on the 20's foot. Quote Link to comment Share on other sites More sharing options...
crunchman12001 Posted March 9, 2020 Share Posted March 9, 2020 These were my KLF-20's. Quote Link to comment Share on other sites More sharing options...
dian83 Posted March 9, 2020 Author Share Posted March 9, 2020 1 hour ago, crunchman12001 said: The CF-3's I had were different. They had a plastic cap similar to the KLF-20's but fit over the knurled part of the foot instead of screwing into the bottom nut on the 20's foot. I don't know but I just found 4 feet from CF-3 and they look like KLFs. Probably some EPIC speakers have different feet. 1 Quote Link to comment Share on other sites More sharing options...
dian83 Posted March 9, 2020 Author Share Posted March 9, 2020 On 3/3/2020 at 2:28 PM, triceratops said: Hi Dian, Thanks for the explanation. I thought that was what you were saying in the original post, but I wasn't certain. I am surprised that the pictured receptacles have been removed on your other pair of KLF20's. You might also add a photo of the bottom of one of your cabinets showing an empty hole where the receptacle should be. A picture is worth a thousand words, as they say. I'm not sure the "Alerts" section is the best place for your question--maybe Technical/Modifications? Is there a thread on the KLF Legend series like there is for the Epic series in 2-Channel Home Audio? I recently purchased a pair of Klipsch Epic CF-4's and they appear to have the same threaded receptacle arrangement as your KLF20's. So if there is not a dedicated thread for KLF owners, you could post something in the Epic thread that might generate some good advice. If you haven't already done so, I would check in with Klipsch to see if those threaded receptacles might still available from the parts department. it's possible those parts were used on more than just the Epic and KLF series (maybe someone who knows can chime in). I would not call these pieces "feet" because they are intended to have feet or spikes attached to them. The thin caps that you have pictured that slide over the receptacles are also not technically "feet" even though they can serve that purpose. They are really just shipping covers to protect the threaded receptacles in transit. There may be similar caps available at your local hardware store, sold as furniture end caps. While you're waiting for a definitive solution for your missing hardware, I would put some small self-adhesive felt pads on the bottoms of your KLF's to protect the wood from scuffs and scrapes. These can be easily peeled off once you find what you need for a more permanent solution. I hope to compose a long post about what to thread into the receptacles to serve as feet for the cabinets, for folks that are missing that hardware, but I'll leave that for another time and place. -triceratops I received reply from Klipsch and they don't have any feet available in stock. 😞 Quote Link to comment Share on other sites More sharing options...
ZEUS121996 Posted March 9, 2020 Share Posted March 9, 2020 5 hours ago, dian83 said: Hi folks, I found 4 feet from CF-3 they are the same like the original for KLFs. So, looking for another 4 feet from Klf 20 or Epic CF-3, CF-4... See the picture, Thanks These feet came off a CF-3 I parted out, Dian picked them up from me Saturday. Quote Link to comment Share on other sites More sharing options...
crunchman12001 Posted March 9, 2020 Share Posted March 9, 2020 18 hours ago, ZEUS121996 said: These feet came off a CF-3 I parted out, Dian picked them up from me Saturday. The CF-3 feet I posted above were from a version 1. What version did your come off of? Klipsch must have changed feet at some point for the CF-3's. I am pretty sure the rubber feet came standard if the speakers did not have the optional spike kit. Quote Link to comment Share on other sites More sharing options...
ZEUS121996 Posted March 9, 2020 Share Posted March 9, 2020 1 hour ago, crunchman12001 said: The CF-3 feet I posted above were from a version 1. What version did your come off of? Klipsch must have changed feet at some point for the CF-3's. I am pretty sure the rubber feet came standard if the speakers did not have the optional spike kit. I'm not sure what version they came off of, it was a couple years ago. I pulled anything that could be used and set them on the side Mark 1 Quote Link to comment Share on other sites More sharing options...
dian83 Posted March 15, 2020 Author Share Posted March 15, 2020 Still looking! Quote Link to comment Share on other sites More sharing options...
David1964 Posted January 27, 2021 Share Posted January 27, 2021 I need plastic caps that go over spikes on cf4. I need 2 of them. Been looking everywhere. Thnx Quote Link to comment Share on other sites More sharing options...
David1964 Posted January 27, 2021 Share Posted January 27, 2021 (edited) I need plastic caps for epic cf4 feet that fit over the spikes. I need 2 of them. My no. Is 716-331-4650 . Name is David. Thnx Edited January 27, 2021 by David1964 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.