Kman Posted February 28, 2003 Share Posted February 28, 2003 Does anyone know of a good quailty stand to hold the beefy RC7 center channel-all the ones I've come across seem alittle wimpy in size-any suggestions appreciated Kman Quote Link to comment Share on other sites More sharing options...
kenratboy Posted February 28, 2003 Share Posted February 28, 2003 Have you considered building one? How high do you need it? Any tilt on the speaker (like pointing up?) Quote Link to comment Share on other sites More sharing options...
Kman Posted March 1, 2003 Author Share Posted March 1, 2003 No I haven't thought about building one- I was looking at different sites but they all seem alittle small in size- I've seen a few ads with Vienna and Ariel speakers and they show this beefy center speaker sitting on this beautiful stand- so Iwas curious if there were any reputable dealers that sell these stands- maybe they are from the speaker manufacturer only? I will have to keep digging I guess Quote Link to comment Share on other sites More sharing options...
NOZ Posted March 1, 2003 Share Posted March 1, 2003 I looked around but couldn't find anything. I ended up building my own. Quote Link to comment Share on other sites More sharing options...
cultrain88 Posted April 1, 2003 Share Posted April 1, 2003 I just recently bought a wood technology CT-12. Its a bit pricey for what they give you. It is built with a angle, and they do give you spikes for the bottom to tilt it some more. It does seem to be a bit cheap looking. I found another stand at Ulitimate video for $130. They have the RC-7 on top of it. But it is quite beefy and would go quite well with any center. Unfortunately, my t.v.'s height would not allow it to be placed there(my t.v has a height of 24" to bottom of screen, and the rc-7 is nine inches tall). The one at ultimate is 18" stand. Cultrain88 Quote Link to comment Share on other sites More sharing options...
Michael Greenway Posted April 1, 2003 Share Posted April 1, 2003 try www.avfurnishings.com He sells most brands and lets you compare. I bought a Plateau to fit over my big screen. Quote Link to comment Share on other sites More sharing options...
T2K Posted April 2, 2003 Share Posted April 2, 2003 I believe SANUS makes a center speaker stand. I ran across the stand a couple weeks ago looking for speaker stands. Do a Google search on SANUS, and good luck! Keith Quote Link to comment Share on other sites More sharing options...
Kman Posted April 2, 2003 Author Share Posted April 2, 2003 Thanks for the replies- I tried looking for Ultimate video and was unsuccessful- could you provide a link maybe? I did come across the Sanus stand- but I belive it was 22" tall- I wanted something a litle taller- it seems that 18-22 inches is the standard height- but it seems low -even when seated it would be below ear level- am I wrong?-the search will continue though, thanks Kman Quote Link to comment Share on other sites More sharing options...
ssh Posted April 2, 2003 Share Posted April 2, 2003 Kman, I have three C7's wall hung, using OmniMount 60 OWB-B's.Efunctional.com has them at a great price. SSH Quote Link to comment Share on other sites More sharing options...
T2K Posted April 2, 2003 Share Posted April 2, 2003 Get some 5/8" threaded rod and MDF at Home Depot and make your own, aka the flexi- rack. You can either paint it or buy veneer plywood in 2' x 2' panels and stain them. Use four rods and space them 6" to 12". Spike the base (Parts Express). Use the front/rear nuts to adjust to correct angle. Shouldn't cost over $30 or so. Keith Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.