delhite2 Posted July 15, 2008 Share Posted July 15, 2008 is there anyway to program my onyko 705 learning remote control to be able to control my rw12d subwoofer. please guide.. with thankx Quote Link to comment Share on other sites More sharing options...
yamahaSHO Posted July 20, 2008 Share Posted July 20, 2008 If it is a learning remote, then you'll need an IR to copy, correct? If so, you might be better of getting a Logitech Harmony as can work with the sub natively (normal setup with PC). The other option is to find someone with it and have them load it into the remote and then you can use the IR learning function. Quote Link to comment Share on other sites More sharing options...
Rich_Guy Posted July 20, 2008 Share Posted July 20, 2008 I use a URC MX-850 remote with my RW-12d. There are only a few remotes which are capable of getting the IR codes to use with the Klipsch subs, you will either need to upgrade to one of these remotes or borrow one that you can use to teach your learning remote. The remote function is great with these subs. Not only can I easily control the sub by the remote but with the remotes macros the sub will automatically switch to the preset modes I have for music or movies when I change to these sources, this is a real plus for these subs. Quote Link to comment Share on other sites More sharing options...
kelA Posted July 26, 2008 Share Posted July 26, 2008 Are these codes listed in the URC downloadable database? Quote Link to comment Share on other sites More sharing options...
customsteve01 Posted July 26, 2008 Share Posted July 26, 2008 delhite2 I think I have the codes on a disk let me look. edit: Found it if you will send me an e-mail I will send them to you. Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.