Jump to content
The Klipsch Audio Community

Frzninvt

Heritage Members
  • Content Count

    7529
  • Joined

  • Last visited

Community Reputation

527 Revered

About Frzninvt

  • Rank
    Klipsch Maniac
  • Birthday 06/01/1962

Profile Information

  • Gender
    Male
  • Location
    Vermont

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. For the pre-cut perfect fit gaskets you can go to crites website or eBay as I believe he sells them there as well.
  2. Unless any of the caps are leaking you really aren't going to gain anything unless you invest in some really high end networks. I would get some Caigs DeOxit and loosen up all the spade terminals on the crossover network give them a spray and retighten all of them. Make sure crossover board is mounted tight on the side on the cabinet. Unscrew each of the K-55's and replace the rubber gasket that is inside the horn lens at the bottom of the threads. That is about it. Really easy doesn't cost much other than the Caigs and some of your time.
  3. Specs are no indication of a speakers timbre' your best option is another Forte III if you can't pull that off next choice would be a Heresy III. Nothing from the pro line or reference line is going to blend well at all.
  4. It depends do you have Heritage or Extended Heritage up front, something from the KG line perhaps then the 3.5's are the best choice. If your L C R are reference then I would use a reference speaker in that position.
  5. I used Morel MW-166's a 6" woofer with an fs of 43Hz and 3" voice coils. Used my own 2-way passive networks with Polk Audio MM-3000 tweeters. Are you looking for separates or coxial? Some JL Audio and Alpine Type-R components are good. Morel, Focal, Clif Designs if you really want top notch.
  6. The signal processor he used was the PCB board out of a DBX 5BX-DS 5 Band Computer Controlled Dynamic Range Controller with 5 frequency bands of impact restoration. I used a DBX 3BX-DS in my '94 Camaro when I competed on the IASCA Sound Quality circuit in the mid 90's.
  7. There is also a hidden strip where the woofer lead drops into the bass cabinet as well under the top hat section. So you have that to consider as well.
  8. Audio Systems in Laredo, TX? They used to have the whole Heritage line on the showroom floor. First time I heard Klipsch speakers was there. They had the top end gear from alot of manufacturers and car audio gear as well all the really nice Alpine components in the late 70's early 80's.
  9. My brother in law wants to offer a bid on the five Heritage speakers and wants to know what subwoofer is/was being used with the five Klipsch Heritage speakers or was one not being used.
  10. That is not a sub that is a very large midbass cabinet with not much output below 30Hz even eq'd and placed properly. It will have midbass output 40 - 80Hz in spades though.
  11. Sorry, these have long been sold. Thanks for your interest.
  12. David, a suggestion if I may. A list of all the components and speakers included in this auction/sale might lead to better results. As a shopper I would like to know what I am bidding on and right now it is not 100% clear to me what all is included.
  13. Not upgrades, lateral move at best. Update would be a better term. GLWS
×
×
  • Create New...