TNRabbit

That will work.. My Sunfire amp has BOTH trigger input types. Just connect the positive & negative of the stripped cable. There are four (2 +, 2-) so you can connect two different trigger devices.

Welcome, Joel! Please describe the rest of your system; we'll that information to properly guide you in what you're trying to do~

For decent CHEAP phones, I purchased a pair of Philips SHS5200 on amazon.com for around $10, and they actually sound pretty good considering the price. They wrap around the back of your head & have a reflective strap for safety. They also have a cool little relief bungie that prevents the wire from pulling out at the headphone.

OK, I've firmed this up starting at noon on June 19th, continuing until we're done~

Verify: 1. Impedance is the same 2. Wires were not inverted (out of phase)

If I am not tied up that weekend, I'll have to consider coming out. Would love to check out your rig. The march one was not a good timing on my part (plus the crappy weather did not help either). I was up at Whitetail in PA, skiing with one of my friends that weekend. Cool! PM sent with details.

Bob is at it yet AGAIN, with a 60 wpc increase in output! http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180502457652&ssPageName=ADME:X:RTQ:US:1123

Near Solomon's Island.

$19,600.00 and reserve not met~

Date has moved; probably to June 19 or 20.

That's right! I'm planning another get together at my place around the first week of June 2010, most likely Friday afternoon or Saturday. Exact date TBD. Any interest post here or PM me. Here's a link to the last one in March: http://forums.klipsch.com/forums/p/131858/1335429.aspx#1335429

11 hours left; today, we'll see what separates the men from the boys~

I believe this has been a common problem with Klipsch motorboards over the years; I had the EXACT SAME issue with a pair of KLF-10s. Fixed 'em just like yours, Gorilla Glue & all~

Here ya go: Klipsch KB 3.1 bookshelf speakers, driven with a 285 wpc Kenwood amp. Subs are Infinity Kappa Perfect 10.1 Dual Voice Coil, driven by a Kenwood 1000 watt amp (clean & clear). The audio in this video is terrible, but this song is as clear as a bell:

Well, it's his father's table... imported from Italy 23 years ago. He said it took 9 months to get to the U.S.

I agree completely with you on these: 3. Definitely Maggie Gyllenhaal bending over the desk to receive spankings from uptight lawyer James Spader in the shocking Secretary (2002). So hot. 4. Of course, Chocolat. Not simply because it has Johnny Depp, Juliette Binoche and Lena Olin, all that is certainly reason enough, but because without a lot of nudity or sex, as in the two above, Chocolat weaves a charming tale of magical love certain to move and inspire the fairer sex, and perhaps a few skeptical tweaking audiophiles as well. 5. Yes, Liv Tyler’s topless nudity in Stealing Beauty (1996) is an attention grabbing scene that is the hallmark of this sensuous film. But its tale of a young girl exploring the meaning of love and relationships, with yet another powerful performance from Jeremy Irons (Lolita, Merchant of Venice), is what puts this move over the top. 6. It is absolutely Liv Tyler’s brash seductress (three men over the legal limit) in One Night at McCool’s that makes the movie so sexy. Anybody watching this would run away with her.

Even better; two PAIR~

A good bit of heat, but they idle at a low current; Bob has a circuit called the DC restorer (I think) that idles them down lower when not needed. Not sure how it works, but he explained it in one of the Q&As on this tube amps on ebay.

Yep! All 30 KT-88 Silver Eagle tubes are included. From the owner over at carveraudio.com: "Evidently, there seems to be some concern about the fact I was running the tube amps with no load (no speakers connected) In fact, this IS a concern for the majority of tube amps. However, none of the Carver tube amps are affected by this. The majority of tube amps WILL go into oscillation if there is no load placed on them. The Silver tube amps will NOT. The circuit Bob designed is so stable, you can run these amps with an input signal... no load, and they will just sit there and purr away. Where the majority of tube amps will start popping tubes like they are cheap light bulbs. The other question I got was, Why is the right meter reading 0, as where the left bias meter is reading .2 The answer is, I took some of the photos before the output relay engaged on the right amp. The meters stay at 0 for about 4-5 minutes while the tubes are warming up. The left amp was turned on before the right amp was. I saw a spot that needed dusting, and wound up turning on the right amp a few minutes later than the left. Yes both meters work perfectly, and both read the same bias, around .2 I'll ask Bob to write up a little something on the circuitry and stability of the Silver amps, and post it here later."

Beautiful~ I've never, in 13 years on eBay, seen anything go from $1 to $15,000.00 in FOUR HOURS...now they're up to $18k... I'm guessing they'll top $28k. http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=140400767925&ssPageName=STRK:MEWAX:IT

Will you be running a sub? If not, the KLF-30s have astounding bass~

Kodak has some REALLY easy point&shoot cameras at WalMart; you can get them with a charging/interface base that connects to the computer so you just sit the camera on the base & it automatically downloads them to the computer & charges the camera. They used to have a base with built in printer that was awesome, but I haven't seen one of those in a while. Prices are very competitive.

Bob's latest pair of tube amps sold for over $10k!!

"Kind of Blue" is a REALLY good color for H/T speakers~ []