Alain C Posted May 30, 2014 Author Share Posted May 30, 2014 Are you running the stock Klipsch crossovers in this configuration? Yes, there stock. I read the thread with Youthman and DeanG and it sounds very tempting. but I need to just let it ride for a while. I'm going to try to figure out the signature thing next. Alain Quote Link to comment Share on other sites More sharing options...
Schu Posted May 30, 2014 Share Posted May 30, 2014 indeed... in your config, the speakers are perfect. I would only suggest POSSIBLY considering a change later after you get used to the speakers IF you are really into critical listening. 1 Quote Link to comment Share on other sites More sharing options...
Zen Traveler Posted May 30, 2014 Share Posted May 30, 2014 I wasn't advocating getting a new crossover, I was going to recommend putting the jumper back in place and running one set of speaker wires. Quote Link to comment Share on other sites More sharing options...
Alain C Posted May 30, 2014 Author Share Posted May 30, 2014 I was going to recommend putting the jumper back in place and running one set of speaker wires. I will do that at some point. thats's the way I ran my KLF20's so speaker wires were allready there .and pluged in to the crown and marantz. When I tried it with the KLF20's the marantz had great high end, and somewhat strained low end. 110 watts is just not enough when you hit a very demanding passage. So I bought the Crown xls1000. Great lows not so great hi end. So I took the best of both. 1 Quote Link to comment Share on other sites More sharing options...
Deang Posted June 2, 2014 Share Posted June 2, 2014 Why do you guys stay with those junk plated jumpers? You should replace them with some nice copper wire. Quote Link to comment Share on other sites More sharing options...
Heritage_Head Posted June 2, 2014 Share Posted June 2, 2014 Why do you guys stay with those junk plated jumpers? You should replace them with some nice copper wire. I dont have those anymore but when I did I used the stock jumpers. I always wondered if I should go with wire like they used on the older ones. Quote Link to comment Share on other sites More sharing options...
Zen Traveler Posted June 2, 2014 Share Posted June 2, 2014 Why do you guys stay with those junk plated jumpers? You should replace them with some nice copper wire. I dont have those anymore but when I did I used the stock jumpers. I always wondered if I should go with wire like they used on the older ones. Surely Klipsch didn't scrimp on those to save money and jeopardize SQ.... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.