Paducah Home Theater Posted December 9, 2014 Author Share Posted December 9, 2014 keep in mind i bought flat packs case i have no tools or the space to make my own enclosures, and then also shipping four flat packs is pricey. when i bought woofers they were more expensive cause they were not outsourced yet. and they were 179 plus each woofer cost like 35 to ship. and the amps also were still full retail at the time. That explains most of it. 1 Quote Link to comment Share on other sites More sharing options...
Scrappydue Posted December 9, 2014 Share Posted December 9, 2014 still worth every penny. but i wish i could talk more people into switching. they don't know what they are missing out on Quote Link to comment Share on other sites More sharing options...
Paducah Home Theater Posted December 9, 2014 Author Share Posted December 9, 2014 Wonder what their 24" sounds like. I'm wanting two more 18's but I'm aggravated about how the iNuke works. It's basically two iNuke 3000's, so hooking it up in stereo is already bridging them. So, you can't bridge the whole thing, meaning I can't use my two UltiMax's and get two more. I'd have to run it stereo into 8 ohms per side which kills a bunch of power. Either that or start over, otherwise it's like bridging into 2 ohms, in which it would see 1 ohm. Quote Link to comment Share on other sites More sharing options...
derrickdj1 Posted December 11, 2014 Share Posted December 11, 2014 Get another I Nuke DSP 6000. I use one channel per driver at 4 ohms. Quote Link to comment Share on other sites More sharing options...
Paducah Home Theater Posted December 11, 2014 Author Share Posted December 11, 2014 Get another I Nuke DSP 6000. I use one channel per driver at 4 ohms. I was worried about the electrical. I can trip a breaker just by putting my receiver and amp on the same circuit. I assumed I'd have to introduce a third circuit. Maybe it's not necessary if I set up limiters. I have a bathroom with a mostly wasted 20 amp circuit just on the other side of the wall, worst case might could tap into it. Quote Link to comment Share on other sites More sharing options...
laager Posted February 12, 2021 Share Posted February 12, 2021 On 12/9/2014 at 6:14 PM, derrickdj1 said: Ouch! ...and 6 years later I ask: what are the distortion figures on any of them except the DTS-10? Ouch, indeed... Quote Link to comment Share on other sites More sharing options...
Paducah Home Theater Posted February 19, 2021 Author Share Posted February 19, 2021 On 2/11/2021 at 8:28 PM, laager said: ...and 6 years later I ask: what are the distortion figures on any of them except the DTS-10? Ouch, indeed... single um-18. Flat as a pancake 32 hz on up, even when being severely spanked. Intermodulation distortion is a different story but alas such things don't exactly have a standard for measuring. Ouch indeed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.