InVeNtOr Posted October 12, 2015 Share Posted October 12, 2015 i have several sheets of Aircraft Grade A Ebony veneer. i cherry picked these so that i could re-do my RF-7's. as you can tell, there are plenty to do 2 towers and even a RC-7. there is 1 sheet that i picked so that i can do the front of the RC-7 (it's the smallest piece in the pics). there should be enough to do a sub (Sunfire 12") as well. i'm open to offers.... Quote Link to comment Share on other sites More sharing options...
Scrappydue Posted October 12, 2015 Share Posted October 12, 2015 isnt the aircraft grade thicker than usual? Quote Link to comment Share on other sites More sharing options...
InVeNtOr Posted October 12, 2015 Author Share Posted October 12, 2015 i believe. it's supposed to the best you can get. it's wood backed as well. Quote Link to comment Share on other sites More sharing options...
Schu Posted October 12, 2015 Share Posted October 12, 2015 Ebony is one of my personal favorites... besides Brasilian Rosewood of course. I thought if ever I was lucky enough to have a NBS or VRD's built, I would want them finished in ebony. All my Guitars are Ebony, fingerboards. Quote Link to comment Share on other sites More sharing options...
InVeNtOr Posted October 12, 2015 Author Share Posted October 12, 2015 it's in the top for me as well. the reason i picked this specific veneer, the lighter grain, matches the copper cones perfectly. i thought it would give them a stellar look. top that off with all the mod work (despite what a specific person thinks) i was planning on have a super custom great looking set. i was going to have the mains, center, and sub all done. i was going to keep all 4 RS-42's original. Quote Link to comment Share on other sites More sharing options...
Carbon_66 Posted October 13, 2015 Share Posted October 13, 2015 I'm very interested. Can you post dimensions and quantity please. Quote Link to comment Share on other sites More sharing options...
InVeNtOr Posted October 13, 2015 Author Share Posted October 13, 2015 ok. when i get home i'll put a tape measure on them. the quantity is easy....18 total sheets. 1 of those sheets is much smaller (again for the front of a RC-7). the dimensions are all about the same, within a inch or so. basically each sheet overlaps the side of the RF-7 by at least 2". Quote Link to comment Share on other sites More sharing options...
InVeNtOr Posted October 14, 2015 Author Share Posted October 14, 2015 (edited) long day.... 1ea @ 30 x 14 1ea @ 46.5 x 15 (there is a huge chunk about in the middle on the edge) 8ea @46.5 x 20 8ea 49 x 20 of course i rounded down slightly. if you are super serious and you give me the dimensions of what ever you want to use this on, i can check and see if there are enough pieces with the machine laqure on it. that way, once you are all done, you won't have to apply that first dreaded coat. i guess i should tell everyone that...the reason why some of these sheets are shiny and others are not, is because the first coat of polyurthane is done by a machine so it's perfectly applied and uniform. so there are no waves. my bad everyone, i just didn't think about it. Edited October 14, 2015 by InVeNtOr Quote Link to comment Share on other sites More sharing options...
USNRET Posted October 14, 2015 Share Posted October 14, 2015 (edited) isnt the aircraft grade thicker than usual? Aircraft grade would be formulated to resist fire and fumes. So how are you liking OKC vs Dallas, Inventor? Edited October 14, 2015 by USNRET Quote Link to comment Share on other sites More sharing options...
Carbon_66 Posted October 14, 2015 Share Posted October 14, 2015 Thanks for the dimensions. Not going to work for me. GLWS Quote Link to comment Share on other sites More sharing options...
InVeNtOr Posted October 14, 2015 Author Share Posted October 14, 2015 it's not bad. traffic/people are less. i just traveled back to move a bunch of stuff from the house there, and i simply forgot how many people are there! even driving around OKC it's not that bad. my new home is death to HT, it's going to be just a 3.1 from now on. i do like it here, but i would wish some of these OKC people would simply stop "hating TX". it gets old. it goes beyond sports, and really seems childish. not everyone is like that, but i have ran into my fair share. i miss a few resturants...lol (of course a fat man would say that!) Quote Link to comment Share on other sites More sharing options...
InVeNtOr Posted October 14, 2015 Author Share Posted October 14, 2015 curious, what were you planning on using it for? Quote Link to comment Share on other sites More sharing options...
Carbon_66 Posted October 14, 2015 Share Posted October 14, 2015 curious, what were you planning on using it for? Heresys. Don't want the lighter edge and the pre-lacquer would be an issue. The wood backing would make it difficult to book match as well. Quote Link to comment Share on other sites More sharing options...
InVeNtOr Posted October 14, 2015 Author Share Posted October 14, 2015 ah, yeah then, sounds like a perfect miss match! lol! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.