pzannucci Posted January 24, 2018 Share Posted January 24, 2018 31 minutes ago, Youthman said: My RF7 II have DeanG crossovers. The desire is to return them to factory crossovers for the comparison. Ah totally misinterpreted what you were doing Quote Link to comment Share on other sites More sharing options...
wvu80 Posted January 24, 2018 Share Posted January 24, 2018 On 1/23/2018 at 9:40 AM, Deang said: That's just the high pass section, the low pass board is underneath. Of course, I should have known that by the way the HF and LF wires are attached. My CF-4 XO is designed in that "sandwich" arrangement as well. On 1/23/2018 at 9:40 AM, Deang said: Mutual inductance from the coils is factored in -- the coil values are adjusted to account for it. That makes sense and I'm sure the professional XO engineers at Klipsch can easily account for that mutual inductance in the design. In my very little world of DIY I've put together some XO's but I have to be more deliberate how I arrange coils because the designs are not as sophisticated. And neither am I. Quote Link to comment Share on other sites More sharing options...
wvu80 Posted January 28, 2018 Share Posted January 28, 2018 @Youthman how is the search for the RF-7 II crossovers going? Quote Link to comment Share on other sites More sharing options...
Moderators Youthman Posted January 28, 2018 Author Moderators Share Posted January 28, 2018 I should know on Monday. Quote Link to comment Share on other sites More sharing options...
Klipsch Employees Chief bonehead Posted February 22, 2018 Klipsch Employees Share Posted February 22, 2018 On 1/23/2018 at 7:34 AM, Deang said: All did was a part for part replacement on the high pass section -- and since all caps and resistors sound the same ... well....dont know about sound the same....but they do have different parameters which MUST match. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.