Marvel Posted April 30, 2019 Share Posted April 30, 2019 On 4/5/2019 at 4:49 PM, mopardave said: I packaged the horns back up for now. Dave, I got a pair of the Selenium horns from Bob C., added some PAudio DM-D750 (K-69) drivers. They sound pretty smooth, but I haven't gotten around to doing any measurements and eq. THe slot is not nearly as narrow as the slot in the huge JBL 2365 horns. For those it is only about 5/8. for about 10 inches of the horn length. Bruce Quote Link to comment Share on other sites More sharing options...
mopardave Posted April 30, 2019 Author Share Posted April 30, 2019 2 hours ago, Marvel said: Dave, I got a pair of the Selenium horns from Bob C., added some PAudio DM-D750 (K-69) drivers. They sound pretty smooth, but I haven't gotten around to doing any measurements and eq. THe slot is not nearly as narrow as the slot in the huge JBL 2365 horns. For those it is only about 5/8. for about 10 inches of the horn length. Bruce Ok, so the slot is not as narrow as the jbl horn. Good to know. I will be using the zxpc open throat horns .thanks Quote Link to comment Share on other sites More sharing options...
Marvel Posted May 1, 2019 Share Posted May 1, 2019 I would have ordered a pair of the zxpc horns but couldn't find any available, but these will work ok for now. Quote Link to comment Share on other sites More sharing options...
mopardave Posted May 1, 2019 Author Share Posted May 1, 2019 12 hours ago, Marvel said: I would have ordered a pair of the zxpc horns but couldn't find any available, but these will work ok for now. Seems there is quite a few use that horn . Quote Link to comment Share on other sites More sharing options...
mopardave Posted May 5, 2019 Author Share Posted May 5, 2019 Looks like these zxpc horns will just fit the cabinets on my home built CW. I may have to carve out the rear panel a bit to fit the mid drivers. The zxpc horns measure 11 1/8" deep and the spec on the B&C 85tn is 2.5". 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.