Robbie010 Posted February 13, 2020 Share Posted February 13, 2020 Evening all, I sat down this evening to layout the components for my Type A networks. Massive thank you to @mboxler for help with the parts (FOC no less), so I am using the 3636 (crites) autoformers and was just hoping someone can confirm the correct connections, as I’m not the best at reading schematics! As I read it: The negative input goes directly to pin 0 The positive input goes to pin 5 via the 13uf cap (which is in-turn connected to the positive connection for the tweeter via the 2uf cap) Pin 4 is connected to the positive terminal for the squawker. Is this correct? Quote Link to comment Share on other sites More sharing options...
avguytx Posted February 14, 2020 Share Posted February 14, 2020 15 hours ago, Robbie010 said: Evening all, I sat down this evening to layout the components for my Type A networks. Massive thank you to @mboxler for help with the parts (FOC no less), so I am using the 3636 (crites) autoformers and was just hoping someone can confirm the correct connections, as I’m not the best at reading schematics! As I read it: The negative input goes directly to pin 0 The positive input goes to pin 5 via the 13uf cap (which is in-turn connected to the positive connection for the tweeter via the 2uf cap) Pin 4 is connected to the positive terminal for the squawker. Is this correct? Just email or call Bob Crites and he can tell you quickly. @BEC Quote Link to comment Share on other sites More sharing options...
Deang Posted February 14, 2020 Share Posted February 14, 2020 @Robbie010 You are correct! Quote Link to comment Share on other sites More sharing options...
DizRotus Posted February 14, 2020 Share Posted February 14, 2020 This might help. But still call or email Bob. . Model 3636.pdf Quote Link to comment Share on other sites More sharing options...
Deang Posted February 14, 2020 Share Posted February 14, 2020 What does he need to bother Bob for? Here is some Type AA stuff. Same as the Type A with two extra parts. 1 Quote Link to comment Share on other sites More sharing options...
DizRotus Posted February 15, 2020 Share Posted February 15, 2020 18 hours ago, Deang said: What does he need to bother Bob for? He may not need to bother Bob, but it couldn’t hurt. Armed with a schematic and the 3636 connection scheme from Bob (attached above) I still emailed and spoke with Bob by phone for clarification. A nice thing about Bob, he always makes you feel like you’re not bothering him, even when it must be a bother. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.