finallygotmyheresies Posted June 2, 2020 Share Posted June 2, 2020 Just curious to hear any opinions about whether I should convert my RT-10d to a passive sub and run it with a iNuke NU3000 I already have or should I send the amp off to get rebuilt? Total investment of the amp rebuild will be less than $200. Quote Link to comment Share on other sites More sharing options...
RRR Posted June 2, 2020 Share Posted June 2, 2020 Poor investment either way. Fixing the amplifier is likely less costly and will be at least worth something if you ever go to sell it. 2 Quote Link to comment Share on other sites More sharing options...
finallygotmyheresies Posted June 2, 2020 Author Share Posted June 2, 2020 When working it was quite an impressive sub. It was a big upgrade from my RSW-12 and even better for music than my JTRs are. Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted June 3, 2020 Share Posted June 3, 2020 On 6/2/2020 at 9:55 AM, finallygotmyheresies said: Just curious to hear any opinions about whether I should convert my RT-10d to a passive sub and run it with a iNuke NU3000 I already have or should I send the amp off to get rebuilt? Total investment of the amp rebuild will be less than $200. If you really like the sub then go with the iNuke. It won't cost you a penny to try it as you already have it. Quote Link to comment Share on other sites More sharing options...
001 Posted June 9, 2020 Share Posted June 9, 2020 On 6/2/2020 at 9:55 AM, finallygotmyheresies said: Just curious to hear any opinions about whether I should convert my RT-10d to a passive sub and run it with a iNuke NU3000 I already have or should I send the amp off to get rebuilt? Total investment of the amp rebuild will be less than $200. contact @ngen33r here for the lowest price repair of these subs. he does great work & pretty fast turnaround times. 1 Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted June 9, 2020 Share Posted June 9, 2020 6 minutes ago, EpicKlipschFan said: contact @ngen33r here for the lowest price repair of these subs. he does great work & pretty fast turnaround times. @ngen33r 1 1 Quote Link to comment Share on other sites More sharing options...
cdx304 Posted June 18, 2020 Share Posted June 18, 2020 I would not bother repairing the plate amp .The amps are week and will never last a long time .Run the behringer amp Quote Link to comment Share on other sites More sharing options...
OO1 Posted June 18, 2020 Share Posted June 18, 2020 On 6/2/2020 at 10:55 AM, finallygotmyheresies said: Just curious to hear any opinions about whether I should convert my RT-10d to a passive sub and run it with a iNuke NU3000 I already have or should I send the amp off to get rebuilt? Total investment of the amp rebuild will be less than $200. second the a iNuke NU3000 Quote Link to comment Share on other sites More sharing options...
001 Posted June 18, 2020 Share Posted June 18, 2020 11 hours ago, cdx304 said: I would not bother repairing the plate amp .The amps are week and will never last a long time .Run the behringer amp curious why you say the amps will never last a long time? the reason these amps & many other mass produced amps fail has been identified & when they are repaired they should last for a very, very long time. when repaired they get all new quality caps & the notorious bad glue that usually causes the failures is removed & replaced with a non conductive silicone. & arent the amps matched to the speakers power level? i wouldnt call 350 watts rms "weak"... for the ~$125 price of repair theres no reason not to repair the amp & retain the digital functions of the sub as well as resale value. Quote Link to comment Share on other sites More sharing options...
cdx304 Posted June 19, 2020 Share Posted June 19, 2020 The plate amp in my sub 10 is dead and i cave up trying to get it fixed because i see to many problems and klipsch no longer makes the sub 10 plate amp and nobody wanted to fix it .I now drive the sub with a 1700 watt amp and when the sub goes up in smoke it will find the garbage bin . 1 Quote Link to comment Share on other sites More sharing options...
Moderators dtel Posted June 25, 2020 Moderators Share Posted June 25, 2020 On 6/18/2020 at 10:26 AM, EpicKlipschFan said: curious why you say the amps will never last a long time? the reason these amps & many other mass produced amps fail has been identified & when they are repaired they should last for a very, very long time. when repaired they get all new quality caps & the notorious bad glue that usually causes the failures is removed & replaced with a non conductive silicone. They can last a long time, but if were to bet, I would guess a stand alone amp will last longer. Just me. If I had one of those and the amp died I would use the outboard amp to power the sub and just leave the dead one there to fill that space. Me I wouldn't go passive. . Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted June 25, 2020 Share Posted June 25, 2020 6 hours ago, dtel said: If I had one of those and the amp died I would use the outboard amp to power the sub and just leave the dead one there to fill that space. Me I wouldn't go passive. The first sentence describes going passive. 1 Quote Link to comment Share on other sites More sharing options...
RRR Posted June 25, 2020 Share Posted June 25, 2020 On 6/18/2020 at 10:26 AM, EpicKlipschFan said: curious why you say the amps will never last a long time? the reason these amps & many other mass produced amps fail has been identified & when they are repaired they should last for a very, very long time. when repaired they get all new quality caps & the notorious bad glue that usually causes the failures is removed & replaced with a non conductive silicone. & arent the amps matched to the speakers power level? i wouldnt call 350 watts rms "weak"... for the ~$125 price of repair theres no reason not to repair the amp & retain the digital functions of the sub as well as resale value. The inside of the cabinet is a harsh environment for an amplifier but i agree, value plummets not having the OE amplifier. Nobody wants them, parts value really. 1 Quote Link to comment Share on other sites More sharing options...
001 Posted June 25, 2020 Share Posted June 25, 2020 2 hours ago, jason str said: The inside of the cabinet is a harsh environment for an amplifier but i agree, value plummets not having the OE amplifier. Nobody wants them, parts value really. fully agree the inside of a sub is a very harsh environment & contributes to shorter amp life. but for these klipsch subs & many other brand subs & powered speakers as well as some brands of older separate amps, the cause of failure most times is related to the glue they used becoming conductive & shorting out items on the board &/or cheap china made boards &/or cheap capacitors bulging & going bad. Quote Link to comment Share on other sites More sharing options...
JohnA Posted June 25, 2020 Share Posted June 25, 2020 If you know the EQ applied by the built-in amp (or can test to find out), replicate it with an outboard amp. If not, fix the one you have. After it's fixed, you'd be able to sell and replace it. Quote Link to comment Share on other sites More sharing options...
cdx304 Posted June 28, 2020 Share Posted June 28, 2020 I looked at the plate amp up close and the thing is poorly made and lucky it would last a year if the sub would used the way i use mine any of the 10 i have in different systems i own .I am in house so don't care about any of my ******* neighbors .Lowest power i have running to a set of subs is 1500 watts on 240 volts Quote Link to comment Share on other sites More sharing options...
Moderators dtel Posted June 29, 2020 Moderators Share Posted June 29, 2020 On 6/25/2020 at 8:02 AM, CECAA850 said: On 6/25/2020 at 1:24 AM, dtel said: If I had one of those and the amp died I would use the outboard amp to power the sub and just leave the dead one there to fill that space. Me I wouldn't go passive. The first sentence describes going passive. I was thinking passive as powered by the receiver no separate amp, in line like another speaker. They used to have those and they pretty much sucked Quote Link to comment Share on other sites More sharing options...
OO1 Posted June 29, 2020 Share Posted June 29, 2020 On 6/17/2020 at 11:29 PM, cdx304 said: I would not bother repairing the plate amp .The amps are week and will never last a long time .Run the behringer amp Totally agree with this -----an external amp is the way to go -take out the weak link and forget the problem Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.