Zentar Posted March 22, 2006 Share Posted March 22, 2006 hi am new Quote Link to comment Share on other sites More sharing options...
Parrot Posted March 22, 2006 Share Posted March 22, 2006 Hi Zentar. Quote Link to comment Share on other sites More sharing options...
Mallette Posted March 22, 2006 Share Posted March 22, 2006 Dang, Paul, I fully expected you to dispute... [] Dave Quote Link to comment Share on other sites More sharing options...
r.cherry Posted March 22, 2006 Share Posted March 22, 2006 Is that the wizard of Oz? Quote Link to comment Share on other sites More sharing options...
Speedball Posted March 23, 2006 Share Posted March 23, 2006 Marty, My idea of parallel is to run the sub off the amp binding posts with the speakers and it seems to be the best way for me. "two sets of wires" Quote Link to comment Share on other sites More sharing options...
chops Posted March 23, 2006 Share Posted March 23, 2006 Just as a further question - is the sub ported? I have found that with sealed Heresies the best match is a sealed sub unit. With ported units they generally have trouble keeping up with the speed of the Heresy Bass. I get so sick of hearing people say this. It's another one of those all-time myths. It doesn't matter if a subwoofer is sealed or ported, if designed correctly using the proper driver, amplifier and enclosure, either subwoofer will be just as quick as the next. I have heard plenty of "slow" sealed subs and plenty of "quick" ported subs. In fact, the ported subs that I'm getting ready to build have a MAX group delay of only 11ms at 17Hz. If I were to make them sealed and perform near the same as ported, that group delay goes up to nearly 25ms at 20Hz. Which one of those designs do you think will sound "slow"? The important word you obviously did not understand in my original reply was "generally". It does not imply that there is anything inherently wrong with the design of a ported sub-woofer - merely that the majority of ported designs out there are not capable of keeping up with Heresy speakers. It is a rule of thumb guide and nothing more. No... Obviously, I DO understand. It is stupid to say that "most" ported subs are incapable because it's not true. Like I said, there are an equal amount of sealed subs out there that sound like garbage as well. I'm not talking about cheap so-called subs you get at your local electronics store for $300 or less. And if you want a sub with absolute speed and attack, the only real way to go is either IB or dipole. BTW, Heresy's are not exactly you typical Electrostat loudspeaker if you really want to talk about fast speakers. Quote Link to comment Share on other sites More sharing options...
hwatkins Posted March 23, 2006 Share Posted March 23, 2006 Hello Marty - I always like to chime in on Heresy conversations - They are my favorite versatile speaker. You sub set up seems fine to this country boy and I agree that a sub and heresy's make for very fine listening. Having said all that - after nearly thirty years of heresy listening I always end up liking them best when they are off the floor and in corners. In the ceiling corners is very pleasing to my ears. To each his own... BTW - thanks for sending the twins over - They left after a couple of days and were quite bedraggled. I was so glad to find a couple of women that could last long enough to satisfy me..... Quote Link to comment Share on other sites More sharing options...
thebes Posted March 23, 2006 Author Share Posted March 23, 2006 Hello Zentar and welcome ot the Forum. Got any stories, adventures, questions or other stuff you want to share? Thanks Speed, I'll try them that way also. Henry, from using our revitalized search function it appars you do know your way around the Heresy's. I've dialed ithem in better and the soond has improved but I do notice the boxes vibrate more than when placed on the floor. No wonder they went to MDF on these. I'll try the parrelel, and run up a set of stands and make finald ecisions after spending awhile with them. They may be going to my ex as a birthday present anyways. By the way these are HLW's which I think means Heresy's Lacquer Walnut or is it Light Walnut? If lacquer do I give them the BLO treatment? So that's where The Twins got to. the did mention something about "UIncle Henry". I'm starting tot get suspicoious that they don't have as many uncles as they claim they have. Quote Link to comment Share on other sites More sharing options...
jacksonbart Posted March 23, 2006 Share Posted March 23, 2006 Different can be better, hey we aren't married to our speakers are we? This isn't Russia Danny, is this Russia? Your not cheating on them. Some times you just need some strange to spice it up. Its cool, don't think your going backwards. Take 'er easy and keep on going. Quote Link to comment Share on other sites More sharing options...
hwatkins Posted March 23, 2006 Share Posted March 23, 2006 Henry, from using our revitalized search function it appars you do know your way around the Heresy's. I've dialed ithem in better and the soond has improved but I do notice the boxes vibrate more than when placed on the floor. No wonder they went to MDF on these. I'll try the parrelel, and run up a set of stands and make finald ecisions after spending awhile with them. They may be going to my ex as a birthday present anyways. So that's where The Twins got to. the did mention something about "UIncle Henry". I'm starting tot get suspicoious that they don't have as many uncles as they claim they have. I have always had them sturdily monted, on a shelf or independently suspended and haven't had a rattle problem. I have little quarrel with MDF - My DIY MDF speaker boxes sound great. It is just a really dusty pain to work with. As to LAcquer - I don't know if the BLO treatment does real well - there is limited porosity (OK, it may not pass as a legal word in scrabble, but you catch the drift). I hope I haven't ruined the twins for you..... Quote Link to comment Share on other sites More sharing options...
edwinr Posted March 23, 2006 Share Posted March 23, 2006 I guess applying BLO over a previously laquered surface is possible, but I'd be worried that you couldn't remove all the old laquer from the actual woodgrain without removing too much veneer. A solvent would get most of it off, but there would be lacquer residue in the actual grain - but maybe this doesn't matter though. Quote Link to comment Share on other sites More sharing options...
Parrot Posted March 23, 2006 Share Posted March 23, 2006 Taking care of finishes on wood: http://www.rjfinewood.com/furniture_care_directions.htm Quote Link to comment Share on other sites More sharing options...
pauln Posted March 24, 2006 Share Posted March 24, 2006 Ever wonder why the Heresy tweeters are 3dB hotter than the rest of the Heritage? It's because they were made to be placed in the corners on the floor. All the other Heritage have elevated tweeters. The Heresy tweeter are low and need a little boost. If you elevate Heresys you need to do the mod that drops the tweets 3dB. This alone may cause you to think they don't need a sub. Heresys on the floor in corners should sound fine and have plenty of bass- no sub needed. If you do the mod and elevate them to ear level, well I liked them just fine that way too, but some will feel they need a sub. Pauln Quote Link to comment Share on other sites More sharing options...
hwatkins Posted March 26, 2006 Share Posted March 26, 2006 I respectfully disagree with not needing a subwoofer, but my desire for elevation probably makes the need more dramatic. Quote Link to comment Share on other sites More sharing options...
thebes Posted March 26, 2006 Author Share Posted March 26, 2006 I continue to experiment. Built these risers out of oak, figuring it's dense nature would help the coupling, and since this picture was taken I've stained them with some MinWax Special Oak which gets them pretty close to the speakers finish. Also made them so they be installed without brackets or screws. Swapped out the sub and, put these babies on, and the bass and mids sound better then with the sub. A little bright in this configuration, but I've found these little guys to be very sensitive to placement and need to do more along those lines. And then maybe try the changing tap thingy. I suspect they'll end up on the risers but it's nice to know I'm not breaking any laws of stereo nature by playing around with a sub. Quote Link to comment Share on other sites More sharing options...
thebes Posted March 26, 2006 Author Share Posted March 26, 2006 Here's another pic of the risers. Not exactly quality carpentry but it'll do for me. Quote Link to comment Share on other sites More sharing options...
leok Posted March 26, 2006 Share Posted March 26, 2006 Marty, If you get yourself a sufficiently sophistocated low pass filter (with adjustable cutuff frequency and amplitude) for the sub, you can leave the Heresys connected directly to the amp sans crossover and adjust the low pass so the sub fills in below the mains without intruding on their territory. Leo Quote Link to comment Share on other sites More sharing options...
hwatkins Posted March 27, 2006 Share Posted March 27, 2006 I like the risers Marty. I am not sure if my thinking is true, but I would consider screwing the risers on to mitigate vibrations on an un attached riser (although the wieght of my speakers in the ceiling weem to be good enough). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.