Moderators Amy Posted January 15, 2008 Moderators Share Posted January 15, 2008 Specifications: Palladium P-39F Frequency Response 39Hz-24kHz +/-3dB Low Frequency Extension 28Hz High Frequency Extension 30kHz Sensitivity 99dB @ 2.83V / 1m Nominal Impedance 4 ohms (2.9 ohms min) Power Handling 400W continuous / 1600W peak Recommended Amplifier Power 50 - 1000W Maximum Output Level 126dB (2 speakers in-room) High Frequency Drivers 0.75" (1.9cm) Titanium diaphragm compression driver mated to 90° x 60° Tractrix® Horn HF X-over Freq 3200Hz Mid Freqeuncy Drivers 4.5" (11.4cm) Aluminum diaphragm compression driver mated to 90° x 60° Tractrix® Horn MF X-over Freq 500Hz Low Frequency Drivers Three 9" (22.9cm) high-output, aluminum / Rohacell® / Kevlar® hybrid cone woofers Finishes Zebrawood in Natural, Merlot or Espresso stain Enclosure Type Bass-reflex via triple side-firing ports Enclosure Material Constrained layer MDF (Medium Density Fiberboard) Weight 165lbs (74.9kg) Height 56" (142.2cm) Width 12" (30.5cm) (14.5" / 36.8cm at the base) Depth 24.75" (62.9cm) Built From: 2008 - Quote Link to comment Share on other sites More sharing options...
seti Posted January 15, 2008 Share Posted January 15, 2008 Nice thanks! I saw that pic posted in the blog.... That was a pretty curve. Quote Link to comment Share on other sites More sharing options...
Moderators Amy Posted January 15, 2008 Author Moderators Share Posted January 15, 2008 And a nice cover shot on Audio Magazine out of Germany (literal translation of headline: The Horn-Box Without Errors) Quote Link to comment Share on other sites More sharing options...
Moderators Amy Posted January 15, 2008 Author Moderators Share Posted January 15, 2008 Nice thanks! I saw that pic posted in the blog.... That was a pretty curve. You're welcome, seti, and thanks for reading! Quote Link to comment Share on other sites More sharing options...
billybob Posted January 15, 2008 Share Posted January 15, 2008 Specifications: Palladium P-39FFrequency Response 39Hz-24kHz +/-3dBLow Frequency Extension 28HzHigh Frequency Extension 30kHzSensitivity 99dB @ 2.83V / 1mNominal Impedance 4 ohms (2.9 ohms min)Power Handling 400W continuous / 1600W peakRecommended Amplifier Power 50 - 1000WMaximum Output Level 126dB (2 speakers in-room)High Frequency Drivers 0.75" (1.9cm) Titanium diaphragm compression driver mated to 90° x 60° Tractrix® HornHF X-over Freq 3200HzMid Freqeuncy Drivers 4.5" (11.4cm) Aluminum diaphragm compression driver mated to 90° x 60° Tractrix® HornMF X-over Freq 500HzLow Frequency Drivers Three 9" (22.9cm) high-output, aluminum / Rohacell® / Kevlar® hybrid cone woofersFinishes Zebrawood in Natural, Merlot or Espresso stainEnclosure Type Bass-reflex via triple side-firing portsEnclosure Material Constrained layer MDF (Medium Density Fiberboard)Weight 165lbs (74.9kg)Height 56" (142.2cm)Width 12" (30.5cm) (14.5" / 36.8cm at the base)Depth 24.75" (62.9cm)Built From: 2008 - Wonder how this is possible:Frequency Response 39Hz-24kHz +/-3dBLow Frequency Extension 28Hz High Frequency Extension 30khz Dynamic threshold extension?Anyway, great looking specs! Quote Link to comment Share on other sites More sharing options...
Mr. RF62 Posted January 15, 2008 Share Posted January 15, 2008 Ah, I was just going to ask the same question, extension...? Quote Link to comment Share on other sites More sharing options...
Moderators Amy Posted January 15, 2008 Author Moderators Share Posted January 15, 2008 The frequency response measurement is recorded at +/- 3dB...the extension frequency at around -10db. I could have an engineer-type explain it much better, but that's what I've got for you for the time being. [] Quote Link to comment Share on other sites More sharing options...
seti Posted January 15, 2008 Share Posted January 15, 2008 For those that didn't make it to Amy's blog http://forums.klipsch.com/blogs/amy/default.asp here is the teaser from yesterday Quote Link to comment Share on other sites More sharing options...
billybob Posted January 15, 2008 Share Posted January 15, 2008 The frequency response measurement is recorded at +/- 3dB...the extension frequency at around -10db. I could have an engineer-type explain it much better, but that's what I've got for you for the time being. Good enough for me! Am sure more engineer-types will appreciate your response!Thanks! Quote Link to comment Share on other sites More sharing options...
Mr. RF62 Posted January 15, 2008 Share Posted January 15, 2008 Yes, Thanks Amy, I never looked at it that way, using the term "Frequency Extension" for levels of -10db to -16db.. I'll never look at another speaker the same way thats measuered at +/-3db. S Quote Link to comment Share on other sites More sharing options...
Islander Posted January 15, 2008 Share Posted January 15, 2008 How thick is the enclosure? One inch? Does it vary in thickness? Quote Link to comment Share on other sites More sharing options...
billybob Posted January 15, 2008 Share Posted January 15, 2008 How thick is the enclosure? One inch? Does it vary in thickness?Featuring a “boat-tail” enclosure, the P-39F’s cabinet walls are up to 30mm thick with multiple laminations of medium density fiberboard that have been molded through a proprietary process. Extensive internal bracing gives the speaker a more rigid and structurally sound enclosure http://www.klipsch.com/news-center/press-releases/details/klipsch-palladium-floorstander-a-symbol-of-supreme-luxury.aspx Link from a *Kynergy(member) topic/post: Quote Link to comment Share on other sites More sharing options...
boom3 Posted January 15, 2008 Share Posted January 15, 2008 How 'bout distortion (including FM) at various output levels? Quote Link to comment Share on other sites More sharing options...
Islander Posted January 15, 2008 Share Posted January 15, 2008 How thick is the enclosure? One inch? Does it vary in thickness?Featuring a “boat-tail” enclosure, the P-39F’s cabinet walls are up to 30mm thick with multiple laminations of medium density fiberboard that have been molded through a proprietary process. Extensive internal bracing gives the speaker a more rigid and structurally sound enclosure http://www.klipsch.com/news-center/press-releases/details/klipsch-palladium-floorstander-a-symbol-of-supreme-luxury.aspx Link from a *Kynergy(member) topic/post: Thanks, that clears it up. Quote Link to comment Share on other sites More sharing options...
Jay481985 Posted January 16, 2008 Share Posted January 16, 2008 Frequency Response 39Hz-24kHz +/-3dB hmmm all the reference floorstanders from the rf-82, rf-63 dig deeper? Quote Link to comment Share on other sites More sharing options...
Jay481985 Posted January 16, 2008 Share Posted January 16, 2008 Specifications: Palladium P-39F Frequency Response 39Hz-24kHz +/-3dB Low Frequency Extension 28Hz High Frequency Extension 30kHz Sensitivity 99dB @ 2.83V / 1m Nominal Impedance 4 ohms (2.9 ohms min) Power Handling 400W continuous / 1600W peak Recommended Amplifier Power 50 - 1000W Maximum Output Level 126dB (2 speakers in-room) High Frequency Drivers 0.75" (1.9cm) Titanium diaphragm compression driver mated to 90° x 60° Tractrix® Horn HF X-over Freq 3200Hz Mid Freqeuncy Drivers 4.5" (11.4cm) Aluminum diaphragm compression driver mated to 90° x 60° Tractrix® Horn MF X-over Freq 500Hz Low Frequency Drivers Three 9" (22.9cm) high-output, aluminum / Rohacell® / Kevlar® hybrid cone woofers Finishes Zebrawood in Natural, Merlot or Espresso stain Enclosure Type Bass-reflex via triple side-firing ports Enclosure Material Constrained layer MDF (Medium Density Fiberboard) Weight 165lbs (74.9kg) Height 56" (142.2cm) Width 12" (30.5cm) (14.5" / 36.8cm at the base) Depth 24.75" (62.9cm) Built From: 2008 - RF-83 Specifications frequency response 29Hz-21kHz +/-3dB power handling 250W RMS / 1000W Peak sensitivity 100dB @ 2.83V / 1m nominal impedance 8 ohms compatible high frequency drivers 1.25" (3.2cm) Titanium diaphragm compression driver mated to 90x60 square Tractrix® Horn high freq crossover 1650Hz low frequency drivers Triple 8" (20.3cm) High-output Cerametallic™ cone woofers enclosure type Bass-reflex via triple rear-firing ports height 49.6" (126cm) (w/feet) width 9.25" (23.5cm) depth 20.5" (52.1cm) weight 100lbs (45.4kg) finishes Cherry or Black Ash wood veneer built from 2006 Quote Link to comment Share on other sites More sharing options...
Kynergy Posted February 1, 2008 Share Posted February 1, 2008 Are there specs and prices available for the matching surrounds and center? I start saving today.[8-)] Quote Link to comment Share on other sites More sharing options...
Moderators Amy Posted February 1, 2008 Author Moderators Share Posted February 1, 2008 Hey Kynergy, Sorry, nothing is finalized on the surrounds and center yet. We still have to build and voice them. Thanks! Quote Link to comment Share on other sites More sharing options...
kenratboy Posted February 4, 2008 Share Posted February 4, 2008 Oh my... How will the retail network work on these speakers? I would imagine in addition to being available to a lucky few fans on here, these speakers will need to be in some seriously hi-end showrooms in order to sell. Is there a computer speaker version planned [] Quote Link to comment Share on other sites More sharing options...
smilin Posted February 9, 2008 Share Posted February 9, 2008 AMY, CAN I GET A PAIR YET?[:^)] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.