Marvel

My personal opinion (really) would be to put the tweeters on the inside. You might get more side reflections (from wall) with them on the outside, causing more smear. My small Alesis bookshelk monitors says to put the tweeters to the inside when placing them horizonally, to improve imaging. I had them the other way for a long time. It seems counter-intuitive to put the most directional freqeuncies on the inside, where they are closer together. It was easy to move these as they only weigh about 20 pounds each. Khorns would be harder to move (even just moving the tops).

There are probably different formulations of "Danish Oil". The Watco brand has Linseed oil in it, while one I found use Tung oil. They all contain some amount of mineral spirits, as a carrier. All will penetrate the wood, but tung oil dries to a harder finish that the linseed oil. They have other things added as well, but none of them should hurt the veneer or cause it to release. At least not the original veneer from Klipsch. Too much might, but I think you would have to be soaking it to cause that to happen.

You could have a look in the HT section, where Al K posted his Teac for sale. He has done some other mods to his as well. He added Molex connectors to the boards, so they can be pulled easier, bypassed the volume pots, added better terminal strip on the back for the speaker connections. He posted pics!

---------------- On 7/4/2005 6:28:29 AM Daddy Dee wrote: I've got the crop circle on my desktop. The bachelor pad series is hilarious. ---------------- From pastor to pasture, eh?

Our college went from no student computers on the network to about 600, in one year. The student side is separated from the est of the network. We have had students set up their own access points (not allowed), set up their computers to be a router (not allowed), to more. Sometimes they kill off everyones connection. Besides a WEP key, we also have to put their MAC address into a database. Otherwise, even with the WEP key they don't get anywhere. We had a company install everything and set it up. The first year was awful and it mostly didn't work. We fired them and went back through ourselves. Pulled half the access points and changed antenna. Works a lot better. It is sad that we paid so much money and had to do it over anyway. The upside is that we had a bunch of access points to place in other locations, to extend our coverage. We are using Cisco products for this, and they have been super, albeit pricey.

These guys have great supplies, but htey are a bit far from where you are. The website is a bit clunky, but they do list some walnut ply. http://www.hardwoodgroup.com/chattanooga/cwpcprods.htm

DrWho, I recently fixed one of those ART amps for a friend of mine. It was given to him by another acquaintance. All that was wrong with it was that the fuse holder solder connection was broken. Took all of ten minutes to fix. Those have a very small fan in the back of them, like a 25mm or something. Pretty clean amp, and the fan doesn't make much noise. Not a chip amp, but uses regular transistors. The dba rating is the noise the fan makes. db A weighting. The noise level comes from the fan blade shape and the speed of rotation, blah, blah... The grill on the fan can also be a cause for noise. You can take a 24volt fan and connect it to a 12volt supply and slow it down that way. But the 12volts make not give enough torque to have it start . Try this part number in a search at digikey: P9739-ND So... you are going to add resistors to slow down the fan. Then you can just use the fan to cool off the resistors.

This may be right up fini's alley -- Yesterday I stopped in at a junk furniture store just south of Chattanooga. While I was grieving over all the furniture that was particle board with woodgrain paper, I spotted two cabinets, identical from the outside, stacked one on top of the other. Looking closer at them, they weren't quite the same. Each had a speaker in the left half, but the right half was different in each. One had a space in the bottom for LPs, with the reciever just under the top. Second one looks like the top hinges back and holds a turntable. I couldn't get to the back of it, but the reciever had "Magnificent Magnavox" on the front of the glass. There was a booklet in the cabinet, that explained using for stereo, place the two cabinets about 12 feet apart. The cabinets are in pristine shape. No price on them, and I didn't have a lot of time to try and root around in the back. From the looks of the booklet, I and thinking it is a tube piece of gear, and from what others here have mentioned, probably single ended. It would be high fidelity, but was certainly in nice shape. I was hoping for a console with a Scott or Fisher in it. Bruce

Those tweeter horns are exactly like the ones on my HII cabinets. They are not EV horns. The mid driver on the HII has a smaller VC than the one on the H. This also means that the mid driver wouldn't go as low as the Cornwall/Belle/LaScalla/KHorn. Probably means it isn't going to be quite the same timbre as the older models. The tweeter also goes higher I believe. Could partly be the driver and partly the horn.

I have two Alesis RA-100 amps. 100 wpc into 4 ohms. No fans at all. They don't make the model anymore, and you can pick them up on ebay for cheap. I know there are lots better SS amps, but it is pretty clean. Mine never even get more than warm. The new QSC amps would be great though, due to the newer PS design.

---------------- On 7/1/2005 7:30:24 PM Shade wrote: Also, since you have a laptop, you may want to look into a wireless router. If you do, just make sure you turn on the encryption. Otherwise anyone can get on your network. My friend's wife brought her laptop over when she first got it, and found 3 or 4 wireless networks she could access from my apartment. Instant free internet access. The last thing you want is the neighbor's kid to do any hacking from your internet account. ---------------- Or to have the police come knocking on YOUR door because someone else has been sending receiving child porn on your account. One of the guys in our department goes war driving. He has a laptop with a wireless card, connected to a GPS unit. He finds open wireless access points and it automatically puts them into a database with map locations. He has way over a thousand so far. From Chattanooga down to Charleston, up to Knoxville on to D.C. Sometimes he does a net send and lets them know. Setting up the WEP key is easy. I have a Netgear, and it has worked quite well for us at home, and we have about six or seven PCs on it.

I just came across this link on the lansing heritage forums. GREAT perforated metal. I haven't searched enough to find out about small orders yet, but a lot of nice stuff. perforated screen

I used the Galaxys when I first finished all the upgrades to my Dyanaco ST-70. These (still as hotspots) really rock, and you can crank them more than you can a set of Fostex drivers. Our church was tossing them out, so I have zero investment in them. You would think I have enough to do this summer. Right now they just are making me wonder, and are being stored. Bruce

ALthough not meant for this use, I have a pair of Galaxy Audio Hotspots. ALmost any musician would recognize them. THey are meant as small personal monitors for stage use. Each cabinet uses two drivers, and they are rated at 100 watts each. The Fs is only 140 (I think), but they go very high. I am going to try some bigger boxes for them, and may do a backloaded version. Most of the full range drivers can't be driver very hard, but these remind me of a mini LS (you hear the bass, it is tight, but not too strong). Power handling: 100 watts RMS/140 watts max * Voice coil diameter: 1" * Impedance: 8 ohms * Frequency response: 200-18,000 Hz * Magnet weight: 40 oz. * Fs: 140 Hz * SPL: 92 dB 1W/1m * Vas: .24 cu. ft. * Qms: 1.34 * Qes: .38 * Qts: .30 * Net weight: 3 lbs. * Dimensions: A: 4-3/4", B: must be rear or flush mounted, C: 2-3/8", D: 4", E: 1-1/8". And they are only about $35 each from PE. They also carry the newer model with neodymium magnets. Slightly lower Fs, and 95db/w/m.

I think that model is around 21 db-a. Anything in that neighborhood would be quiet enough. I have some old fans I took out of some Digital Equipment Corp. power supplies. They don't build them like THAT anymore. Ball bearing fan assemblies. Very quiet and should last a long time. Most pc fans are sleeve bearings, and they wear out too quickly.

Digikey carries the Panasonic (Panaflo) fans. That model is about $8.50.

Whenever I make up cables, I have a board with holes in it to hold the parts. A 1/4" hole for the phone plugs (not phon), and one to hold the XLR pieces. Works pretty well, and keeps them form rolling of the table into your lap. If you make one up, you can do it where you have spring clothespins to hold the wire in place for you. I have also used a regular pair of pliers with a piece of bicycle innertube to hold the parts. Bruce

Thanks for the prayers guys. Just a quick update. Met with the oncologist today. Spent five hours at the hospital meeting with him and getting all the pre-testing done. Due to a cancellation, Barbara will have surgery next Wednesday, and it looks like she will not require a skin graft. This is all good news to us, if anything concerning a cancer like melanoma can be considered good news. This disrupts some summer plans, but they were trivial compared to this. Again, thanks. The prayers are much appreciated. Bruce

My son put SP2 on his installation, and he has a lot of huge packages on his (Sibelius, Lightwave 7, etc.). No slowness at all. I'm just glad they finally did a security rollup for Win2K. We are mostly Win2k where I work, so new installs are tedious with all the updates (not service packs).

Oops! We have a pair of each in the house, and they both have velcro. The originals are my son's, but I don't know the year.

Julie, The grills on both the Heresy and Heresy II pull off, being held on by velcro. On the Heresy II, the mid horn has the bottom part of the mounting flange cut in an arc, to fit closer to the woofer. The drivers on the H IIs mount from the front, since the back of the cabinet doesn't come off. The Drivers (speakers) on the original Heresy mount to the back of the front baffle, so the back comes off. Below is the front of a Heresy: Hope that helps. Bruce

There are only 10 kinds of people in the world. Those who understand binary and those who don't.

You never stop! NAME Fs Qes Qms Qts Vas (ltrs) Cu Ft Maget oz Le mH Mms gr Xmax mm RMS St sq in Kappa PRO 35Hz 0.32 9.57 0.31 172.5 6 120 1.04 100 6.03 600 53 sq. in throat 15LF-A

If you are reasonably careful, turn off the MS firewall (that will also slow it down). It is turned on by default with SP2.

---------------- On 6/21/2005 8:20:19 AM colterphoto1 wrote: Well at least my 2005 Honda Accord isn't considered a 'girlie car'. whew! It does have manual transmission- name 5 women who can successfully drive those. Michael ---------------- My wife is one (here sister can't though)