Jump to content

miliellie111

Regulars
  • Posts

    73
  • Joined

  • Last visited

Posts posted by miliellie111

  1. 19 minutes ago, derrickdj1 said:

    Excellent deal.  You should feel good about your choice and be ecstatic with the sound performance.  I find most people that claim fatigue or excessive  brightness have Auddysee based systems.  They turn on auto EQ, use pure direct and other things.  You just don't see these problems on the the Pioneer forum of the same degree.  Matting  the speakers with the gear is a necessary thing.  Not saying Auddysee is bad but, when you have to cut off or not use certain features, the gear and speakers may not be in synergy.

     

    Auddysee is consider a great or the best correction system with which speakers?  I am not bashing it but, you just don't hear the same thing from MCACC users.  I don't use direct or pure direct.  Good old stereo for 2 ch is enough.  I have tried them but, after hours of testing, it is not needed.  Good luck with the system and enjoy!

     

     

    Thanks @derrickdj1 and to all who volunteered their opinions. I couldn’t lose with either package I chose but in the end, the money won out. Looking forward to getting everything set up and see if I experience any of the brightness others talk about. What some consider bright and harsh, others appreciate as detail. Hopefully the “warm” sound of a Marantz SR7010 matches well.

  2. So I ended up going with the RF7-II pacakge in cherry with the RC64-II, pair of RP-240s, and 1 R-115SW. Cherry RF7-II’s are pretty much gone but I found a dealer with a remaining pair who gave me everything for $3399 brand new A stock but without the Marantz SR7011, but I already have an SR 7010 in my living room powering my RP-280’s I could move to this system. Now I am saving $700 over the RF7-III package. Hope I made the right choice and will be happy. I just couldn’t get over the fact the II’s look better than the III’s with the all front wood veneer and the III’s look almost the same as my RP-280’s. 

    • Like 2
  3. 1 hour ago, Tigerman said:

    The 15" is a big yes from me!   I just added a vintage Velodyne F-1500-R to my new RP-280F and it adds the lower octave to the towers nicely..... Doubles for the point one with SACDs and movies too..:emotion-21:

     

    I would put it at the FRONT wall, not behind....  You will detect it when in the rear behind your seating position....

     

    On that front wall, there will be no space for it because the RF'7s will go there. I'll post another pick of the room.

  4. Package A- Pair of RF-7II’s in cherry, RC-64II Center, pair of RP-240s and 1 RS-115SW sub, Marantz SR-7011 receiver.

     

    For $500 more:

     

    Package B: everything up above but I nstead of the II’s,  RF7-III’s, RC-64 III. No Marantz receiver.

     

    Which would you go with. Has anyone heard a comparison between the II’s and the III’s? I like the look of the II’s better but if there is a huge upgrade in sound that would sway my decision.

     

    Are the RP-240s for rear surround speakers food with this package?

     

    I already have the RP-280’fs running in my living room on a Marantz SR-7010. The system above will be for basement music/movies.

     

    Thanks for the help!

  5. Package A- Pair of RF-7II’s in cherry, RC-64II Center, pair of RP-240s and 1 RS-115SW sub, Marantz SR-7011 receiver.

     

    For $500 more:

     

    Package B: everything up above but I nstead of the II’s,  RF7-III’s, RC-64 III. No Marantz receiver.

     

    Which would you go with. Has anyone heard a comparison between the II’s and the III’s? I like the look of the II’s better but if there is a huge upgrade in sound that would sway my decision.

     

    Are the RP-240s for rear surround speakers good with this package?

     

    I already have the RP-280’fs running in my living room on a Marantz SR-7010. The system above will be for basement music/movies.

     

    Thanks for the help!

  6. How come there is no RF-7III atmos speaker (RFA7-III) considering the new RF7-III’s are trying to model the reference premiere series?  The RP-280FA’s  include a 1” tweeter and 4” height driver. How about a RF7-III with a 1.75” compression horn tweeter and a 6/12” height driver?

  7. 4 hours ago, Klippy26 said:

    I presently have an Onkyo TX NR626 reciever that is now powering my new Klipsch R26 F's.  The Onkyo's have a trait for being slightly on the bright side and is more amplified with the new Klipsch speakers.  Was thinking about going with Denon or Marantz to tone that brightness down a bit despite going through a complete calibration with the Audyssey EQ.  Wondered if anyone else did the same.  I love the detail in the Klipsch but just a tad on the bright side.  I'm not sure if "bright" is the correct word to use.  Maybe it should be the horn sound. :-)

     

    Instead of paying $500-$1000 for a warmer sounding receiver, just upgrade the speakers to the RP-280f’s which are not as bright and are a huge upgrade to your current speakers. You get the best of both worlds, a warmer sound and speakers that are much better than what you currently have. Call Mike at Acoustic Sound Design or pm @MetropolisLakeOutfitters for pricing on the 280’s you will save some serious money.

    • Like 1
  8. 3 minutes ago, willland said:

    That is the conclusion I have come to.  My 2016 UN65KS9500 is a wonderful TV and in most if not all categories tests better than the 2017 flagship Samsung. 

     

    Bill

     I have a 60" KS8000 in my living room and I am looking at a 75" in my basement however the new MU series is not a replacement for the KS rather a step down (no Quantum dot technology) so you have to step up to the pricier Q7F just to get quantum dot. However, many say the KS series is either the same or better so save some money and grab one (if you can still find one of course).

  9. 2 hours ago, Youthman said:

    That's always a relative question.  No one can answer that except for you.  You have to determine what your needs and wants are.  If the RF-7 III meets those needs and wants, then yes, it would be worth the upgrade.  If you are completely satisfied with your RF-7 II, then probably not.  Some people could upgrade from RF-7 II to the RF-7 III like I upgrade my meal at McDonalds.  LOL  That's not me by the way.

     

    There are 2 different parties, those who already have RF7-II's and have to make a choice whether or not the price premium is worth it to go through the hassle of replacing them with the III's, and those (like myself) who are sitting around ready to purchase a set of 7's but would like to first hear comaparison's of the II's and III's to make a choice whether or not to pay $1800 a pair (II's) or $3600 a pair (III's).  That is a large price difference. Of course, III's can be had cheaper than that MSRP by an online authorized dealer but regardless you are going to pay more than the II's. It really comes down to whether newer is even better. For example, 2016 model year Samsung 4K TV's are a fraction of the cost of newer equivalent 2017 models, but based on many reviews and expert opinions, the newer 2017 models are not noticebly any better at all and in some cases worse so they reccomend grabbing the older sets.

     

    Speaker and TV technology work slighty different. Well maintained speakers from years ago can still outclass brand new models. Especially with speakers it may not be an actual upgrade, rather just a difference in sound. Is the difference in sound that substantial to justify the price cost? The II's may be brighter, the III's may be warmer. Some prefer the brighter sound for movies and some prefer a warmer sound for music.

     

    It appears that the II's were a big upgrade over the original RF-7's in looks and sound. Personally, I prefer the looks of the II's with the front faced wood veneer over the III's. It really feels like a big step up over the "little brother" RF-82's. I don't feel the same way about the III's. They seem too closely matched with the lesser RP-280F and almost look identical except for size.

    And you can even get real wood veneer on the RP280-FA's with Atmos and those are only $1600.

     

    • Like 1
  10. Trying to plan out my basement setup.

    I received a quote from an authorized dealer of $3600 for the following:

     

    2 RF7II floorstading speakers (Walnut color)

    1 RC64II center channel (Walnut color)

    2 RP250s surrounds (Walnut color)

    1 R115SW subwoofer

     

    I can add a Marantz SR7011 for an extra $900.

     

    $4500 total for everything.

     

    Is this a good deal? Any suggestions on whether or not I should do bookshelves (RP160m ) for the rear surrounds instead of the RP250s? I heard @MetropolisLakeOutfitters also gives good pricing on Klipsch products.

     

    Thanks

  11. So there's an RF7-II owners thread, why not a thread for the flagship 280F Reference Premiers? I've had mine for a month paired with a Marantz SR-7010 and they sound amazing running 2 channel for music and movies. The bass is insane!  These are an excellent value for the cost of these speakers and they look high quality in my living room (even if they are only wood veneer). I saved over $1,000 by not going with the RF-7's and for my needs in my space, they excel. 

     

    Other happy owners chime in on the 280's, impressive sound quality, enhancements over the previous reference series RF82-II's, and whether or not you do not miss jumping up to the big brother RF7-II (if you aren't blasting past the sound barrier in a 5,000 sq ft room)

  12. 8 hours ago, felitopaz said:

    After numerous troubleshooting due to a noise/distortion coming from one speaker, I have come to the conclusion that I may need a new woofer.

    The noise is coming from the center woofer. I will call Klipsch warranty department tomorrow to see how to handle this issue. The speakers are less than a year old and I never abuse them.

     

    Has anyone ever used  Klipsch warranty? If so how was your experience?

     

    Thanks in advance.

     

     

    I just had an RP-280f woofer replaced after only 3 weeks of normal use it developed a dimple in the cone.

     

    You can call but they will just send you here: http://support.klipschgroupinc.com/

     

    On that page you have to open a new ticket and put in information about yourself, a detailed description about the issue and attach your invoice from the authorized dealer(warranty claims are only fulfilled from authorized dealers).

     

    I actually called first and spoke to a rep who told me to do this and he would immediately get the woofer sent out. A week goes by and i haven't heard anything or see any updates on my claim. I call back, speak to another rep and come to find out the previous guy never even processed my claim. Said he must have forgotten :( Not a good feeling first time dealing with them, however the woofer did get shipped out pretty quickly. I got the new woofer and everything looks good except there a couple minor bends on the edge of the woofer basket. Not enough for me to go through the hassle of getting a replacement though.

     

    Just submit your claim but check back in with them for updates.

  13. Why do people crossover excellent big tower speakers like these? The sound production of all frequencies on these things are wonderful. I run mine full range. Play them as they were engineered. Why limit some of their capabilities? Like putting a speed limiter on a Ferrari! Otherwise, you could have gotten the same result with bookshelves and a good sub, saved your self some space and $600.

  14. 1 hour ago, klipsch_home said:

    Hi,

     

    I currently have Onkyo NR609 driving 2 fronts - RP280fs and 1 center speaker - 450c. I really like our system so far but not sure if Onkyo Nr 609 is good enough for my speakers.

     

    1. Considering upgrade to either Denon X4300h or Onkyo RZ810/RZ800. Does anyone have any feedback which one will be better? Our usage is 60 % music and 40 % movies.

    2. Anyone compared Onkyo NR series with RZ series receivers and has any feedback on audio quality/clarity differences between them?

     

    Any pointers much appreciated.

    Why are you not sure if that current receiver is "good enough"? It has 7 channels, you are only using 3. It has 100 watts per channel, more than enough to drive your speakers to painfully loud levels without distortion before the cops come knockin. It is a good midlevel receiver the same as the other two you mentioned except they are newer with a few extra features you most likely will not use.

     

    The newer Denon and Onkyo are $1500 and $1300 respectively. In my opinion, you would just be throwing that money away.

  15. On 1/17/2017 at 4:39 PM, Jefecito said:

    Hi all there! :)

     

                Im new to the Klipsch world and I kicked off with a Marantz SR7010 + Klipsch RP-280F to start with my home theater build for music and movies purposes. In the near future im planing to add the 450C center channel and a RP-115SW sub.... at the end depending on size of my future room size some RP-150 or RP260F as rear ones, but at the moment I live with only my floorstanding speakers. 

               So far I'm inlove with my initial setup for music BUT not that much regarding movies. Im lacking bass punch at a decent volumen level, to put everyone in my scenario:

        * Marantz amp goes from 0 to 98 in volumen level, so I watch them in 65.

        * I use my 55 inch 4k tv to reproduce my movies with audio DTS support, Netflix or PC with HDMI.

    Connections:

        * Single wire Eagel 18 gauge cable (keeping the golden metal plate at the back of the speakers that RP-280F brings with them from LF to HF) to the respective front left/right speakers connections in the Marantz amp.

        * Marantz to TV through HDMI (ARC) monitor connector.

     

    I'm lacking that shock that I was expecting of an 8 inch cooper woofers that the speakers got,so my concern is, Do I have something wrong in the way I reproduce movies or how I hooked everything up? 

    I know that when the RP-115SW arrives im going to be in heaven in terms of movie experience :D or at least thats what I expect.

     

    Thanks for reading and any tips advices are welcome!

        

    I have a Marantz SR-7010 running RP-280's only set to large. I hooked mine up and noticed that the volume was low with little bass no matter how far I cranked it up. I did a factory reset on the Marantz (googled) and did not run Audessy. This did the trick for me and now I am impressed :-)

×
×
  • Create New...