rennoc442 Posted June 27, 2011 Share Posted June 27, 2011 Well I was finally able to get this beast and I love it! A question on setting this up, on my old sub I set the crossover on the sub to the highest point to turn it off (bypass the crossover), and used the yammies onboard crossover. Should I follow this theory or am I doing this wrong? Also how far away should the rear active sub be from the wall is ideal?? I dont think the side to wall distance is very important, is it?? Quote Link to comment Share on other sites More sharing options...
willland Posted June 28, 2011 Share Posted June 28, 2011 Well I was finally able to get this beast and I love it! Kimba, Way to go. Is that the one from Tampa? A question on setting this up, on my old sub I set the crossover on the sub to the highest point to turn it off (bypass the crossover), and used the yammies onboard crossover. Should I follow this theory or am I doing this wrong? Yes, do as you did before. If no way to completely turn off crossover on sub, set to highest frequency. Also how far away should the rear active sub be from the wall is ideal?? I have my RSW-10d's active driver pulled out from the wall about 10 inches. Maybe the big 15 needs a couple more inches to breath. I dont think the side to wall distance is very important, is it?? If you are talking corner placement, listen for unwanted boominess. More bass but usually not as accurate as front placement way off side wall. Bill Quote Link to comment Share on other sites More sharing options...
rennoc442 Posted June 28, 2011 Author Share Posted June 28, 2011 Way to go. Is that the one from Tampa? Yeah boy! Well dude was like a minute from westly chapel! He said he has the grill somewhere, and hopefully he remembers me when he finds it. (20 years from now!) Yes, do as you did before. If no way to completely turn off crossover on sub, set to highest frequency. Yah on this sub, there is an acutal switch to bypass the internal crossover. I have my RSW-10d's active driver pulled out from the wall about 10 inches. Maybe the big 15 needs a couple more inches to breath. I have it about a foot right now, will play some more tmw! If you are talking corner placement, listen for unwanted boominess. More bass but usually not as accurate as front placement way off side wall. Well I meant if I had the rear away from the wall 12", would the side distance matter that much? Its prob like 5" right now. Kimba Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted June 28, 2011 Share Posted June 28, 2011 Nice!! As with any sub, play around with placement (an SPL meter helps also) and see which location sounds best. Where I place my sub in my room, with regards to wall proximity, may not work well in your room. Quote Link to comment Share on other sites More sharing options...
rennoc442 Posted June 28, 2011 Author Share Posted June 28, 2011 I know every room is different, but just wanted an "ideal" number that seems to work well. I've never had a rear firing sub! Where do u suggest to get an spl meter from? Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted June 28, 2011 Share Posted June 28, 2011 Radio Shack. Quote Link to comment Share on other sites More sharing options...
rennoc442 Posted June 28, 2011 Author Share Posted June 28, 2011 So the only spl meter at the shack I see isn't impressive. Starts at 50db and is +/-2db? Not gona be my first option. Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted June 28, 2011 Share Posted June 28, 2011 You can spend (alot) more and get a more accurate meter, but thr RS meter is the one that is most widely used for home HT, and the meter SVS recomends and sells. I'ver had great luck with mine along with repeatable results. I even compared it to my engineer friends mega buck meter and it was extremely close. You do have to use a calibration chart when you get to the low stuff however but it's widely available on the web. Quote Link to comment Share on other sites More sharing options...
Fish Posted June 28, 2011 Share Posted June 28, 2011 So the only spl meter at the shack I see isn't impressive. Starts at 50db and is +/-2db? Not gona be my first option. It may not be your first option but it's the one most often used by everyone I know.I've never before heard any complaint actually.Oh....Congrats on the 15, a very fine sub I think. Quote Link to comment Share on other sites More sharing options...
sivadselim Posted June 29, 2011 Share Posted June 29, 2011 Yea! [] Now I won't feel bad about trying to sell mine locally. [] A question on setting this up, on my old sub I set the crossover on the sub to the highest point to turn it off (bypass the crossover), and used the yammies onboard crossover. Should I follow this theory or am I doing this wrong? Don't do it that way. The RSW-15 has a lowpass bypass switch on it. Use it. Set it to "Disable (LFE Mode)". Also how far away should the rear active sub be from the wall is ideal?? I dont think the side to wall distance is very important, is it?? How far from the back wall is up to you. I like 8 - 12" and that is probably what most RSW owners will recommend. Side wall distance will affect it, too, of course. What you are using in your picture looks fine. But, basically, with your placement what you are asking with those questions is how close to the corner should it be. Experiment. You can aim it diagonally into the corner, too. Quote Link to comment Share on other sites More sharing options...
rennoc442 Posted July 1, 2011 Author Share Posted July 1, 2011 Thanks sivadselim, that's a really cool feature! Quote Link to comment Share on other sites More sharing options...
rennoc442 Posted July 1, 2011 Author Share Posted July 1, 2011 Thanks sivadselim, that's a really cool feature! The only problem I have is the auto on. My old sub 12 would turn on even in the lowest volume settings. But this new sub requires a higher volume/bass to turn on. I guess I can turn up the sub out level on the yammie, then turn down the sub level VIA the side level control. Quote Link to comment Share on other sites More sharing options...
Zen Traveler Posted July 1, 2011 Share Posted July 1, 2011 ... But this new sub requires a higher volume/bass to turn on. I guess I can turn up the sub out level on the yammie, then turn down the sub level VIA the side level control. Congratulations! Fwiw, I had this problem when I first got my RSW-15 and inserting a Y-Adapter increased the signal enough to click on at lower volume. Quote Link to comment Share on other sites More sharing options...
Ironsave Posted July 1, 2011 Share Posted July 1, 2011 One way to get in the ballpark for good placement (I have tried and this works) is to put the sub at your seated listening position. Now; with music (and sub) playing; walk slowly around the room. The places where the sub sounds strongest/ hits hardest is a great start for placement of your sub. (Every room has peaks and valleys because of deflection; room size and such)..... Tweak from there...... Good Luck. Quote Link to comment Share on other sites More sharing options...
sivadselim Posted July 3, 2011 Share Posted July 3, 2011 The only problem I have is the auto on. My old sub 12 would turn on even in the lowest volume settings. But this new sub requires a higher volume/bass to turn on. I guess I can turn up the sub out level on the yammie, then turn down the sub level VIA the side level control. I leave mine ON all the time. Never been an issue for 7+ years, now. There is no real advantage to using the Auto-ON feature. It doesn't actually turn off the sub's amp. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.