TJIann Posted January 2, 2015 Share Posted January 2, 2015 Project Debut Carbon. I love mine. Great value for $400. Paired with McIntosh amp, Cornwalls and Hereseys. Quote Link to comment Share on other sites More sharing options...
colterphoto1 Posted January 2, 2015 Share Posted January 2, 2015 A friend got a ProJect unit, it has it's own preamp and USB output which would be very handy for translating your vinyl into the computer so you could enjoy it on your digital devices as well. Quote Link to comment Share on other sites More sharing options...
Jim Posted January 2, 2015 Share Posted January 2, 2015 I've been looking at USB Units also, but what I have seen, they only do translation into mp3. Maybe I'm not looking at "above entry level". My last turntable was a JVC from 1967. Played very well until I put it in storage, then it had a very bad hiss, so I sold it. I know from my end,I'm most likely going to need to do something with the preamp in it already. I also thought about doing a tube phono pre, but need to do more reading on them and how they actually work as the turntable will most likely be integrated into my 2 channel tube set up. Quote Link to comment Share on other sites More sharing options...
russ69 Posted January 2, 2015 Share Posted January 2, 2015 Just a quick question, do most cartridges interchange with others? Or is it brand specific. I'm in the same boat contemplating a turntable. Maybe, no, or heck no depending on the setup. If you are new to this it's best to consult a turntable specialist and they can get you all sorted out. For a first table I would recommend an audiophile brand all in one unit (table, arm and cart.) in the 500 dollar range. Quote Link to comment Share on other sites More sharing options...
USNRET Posted January 3, 2015 Share Posted January 3, 2015 Just a quick question, do most cartridges interchange with others? Or is it brand specific. I'm in the same boat contemplating a turntable.Maybe, no, or heck no depending on the setup. If you are new to this it's best to consult a turntable specialist and they can get you all sorted out. For a first table I would recommend an audiophile brand all in one unit (table, arm and cart.) in the 500 dollar range. Google the Needle Doctor 2 Quote Link to comment Share on other sites More sharing options...
LarryC Posted January 3, 2015 Share Posted January 3, 2015 Google the Needle Doctor Excellent idea and then call then for direct conversational help on their toll-free number. Quote Link to comment Share on other sites More sharing options...
russ69 Posted January 4, 2015 Share Posted January 4, 2015 Google the Needle Doctor Excellent idea and then call then for direct conversational help on their toll-free number. Make sure you have your credit card handy. Quote Link to comment Share on other sites More sharing options...
Kent T Posted January 6, 2015 Share Posted January 6, 2015 And demand and want PWK style honesty. The Bull*hit button was done for a reason. Demand honest performance and engineering. PWK wanted you to do so. 1 Quote Link to comment Share on other sites More sharing options...
Krispy Kirk Posted November 9, 2015 Share Posted November 9, 2015 Anybody considering the Pro-Ject Debut Carbon should seriously consider getting the "DC" version since it includes a built-in "Speed Box". Just make sure there's a "DC" at the end of the name and you're in business. No "DC" in the name means no Speed Box. Shop around and you'll find that there is often little-to-no difference in price between these two versions of the Debut Carbon.... "What's a 'Speed Box'?" you ask? Well, it's a small unit that uses a quartz-controlled DC-regulated power supply (vice AC-regulated) to better control motor speed. Normally sold as an outboard unit ($130), it noticeably improves the pace and timing of your PJ turntable and eliminates the dreaded motor hum too. As an added bonus, having a Speed Box allows you to switch between 33 and 45 rpm on the fly without having to futz around with the belt. http://www.project-audio.com/main.php?prod=debutcarbondc&cat=turntables〈=en Quote Link to comment Share on other sites More sharing options...
ChuckAb3 Posted November 9, 2015 Share Posted November 9, 2015 Beware of the USB versions of the Project Debut tables since the built-in phono stage in the older models was not very reliable and could not be by-passed without modifying the table. It also reduces flexibility since it prevented one from using an outboard phono stage or even the one on your preamp, even if the built-in held up. (Mine did not). Things may have improved with the Carbon, but I'd ask a lot of questions before purchasing. Best of luck. Quote Link to comment Share on other sites More sharing options...
sonder Posted November 11, 2015 Share Posted November 11, 2015 www.turntableneedles.com can help you with cartridge compatibility. They do not sell turntables, but they have a drop-down section on their home page that would be a start. I ran across the site when looking for a specific adapter for P-mount cartridges and was impressed. They have a Plug-n-Play pre-mounted cartridge section that I would up buying from. They are very helpful. Quote Link to comment Share on other sites More sharing options...
ToolShedAmps Posted November 13, 2015 Share Posted November 13, 2015 FWIW, I agree with "Krispy Kirk", see the links below, this is an outstanding combo that will get you headed in the right direction. BTW, this is also what my kids run. http://www.needledoctor.com/Brand-Stores/Pro-Ject-Debut-Carbon-Turntable http://schiit.com/products/mani Matt. 1 Quote Link to comment Share on other sites More sharing options...
Kent T Posted November 20, 2015 Share Posted November 20, 2015 A major caveat with budget turntables to know with Klipsch. They will efficiently reproduce mechanical rumble and noise. And motor hum. Choose your turntable accordingly. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.