mark1101 Posted March 25, 2015 Posted March 25, 2015 Well you guys go ahead...........I aint putting Vaseline on speaker wires that connect to my beautiful McIntosh amps. I never heard of such a thing in home audio. Quote
TwoCables Posted March 25, 2015 Author Posted March 25, 2015 Well you guys go ahead...........I aint putting Vaseline on speaker wires that connect to my beautiful McIntosh amps. I never heard of such a thing in home audio. I never said that I was going to use any. Quote
Don Richard Posted March 26, 2015 Posted March 26, 2015 (edited) There are products that are conductive greases which will protect from oxidation and give a superior electrical connection. They contain silver flakes that contact both the wire and the connector on the amp and speaker. I have used such a product from Koford - expensive, but a dab on the end of a toothpick is all that is needed. No way am I going to grease wire with Vaseline to prevent copper corrosion; the "cure" can end up worse than the "problem". Edited March 26, 2015 by Don Richard Quote
TwoCables Posted March 26, 2015 Author Posted March 26, 2015 Yeah, I did start thinking that if petroleum jelly isn't conductive, then that would have a potential of making the signal weaker. I don't have enough education to know if that would make an audible difference, but I guess it doesn't if there are others using it even though there are products that are specifically made for this that are conductive. Quote
CECAA850 Posted March 26, 2015 Posted March 26, 2015 Don, are you talking about dielectric grease? We use it all the time in connectors. Quote
Max2 Posted March 26, 2015 Posted March 26, 2015 I never knew D grease inhibited the flow of current. I guess it would help with stray currents Dielectric grease is a non-conductive, silicone-based grease that's designed to seal out moisture and prevent corrosion on electrical connectors. It also disrupts the flow of electrical current, which makes it good for lubricating and sealing the rubber parts of electrical connectors. It's commonly used in automotive spark plug wires, recreational and utility vehicles, and electrical systems in aircraft. Quote
CECAA850 Posted March 26, 2015 Posted March 26, 2015 Silicone is an insulator but as long as there's a good mechanical connection at the male and female connector, dielectric grease effectively prevents corrosion by inhibiting air and moisture on the contacts. We use it directly in the plug itself. Quote
mark1101 Posted March 26, 2015 Posted March 26, 2015 Don, are you talking about dielectric grease? We use it all the time in connectors. Yeah.......in automotive and heavy equipment. We do the same. Quote
Don Richard Posted March 26, 2015 Posted March 26, 2015 (edited) Don, are you talking about dielectric grease? We use it all the time in connectors. No, the product I referred to is generally used between motor and generator brushes and the brush holder, mostly for heat conduction. When the product is used on wire tightened under screw type connectors the silver particles contact both metal surfaces, which improves electrical contact and the grease makes the connection moisture resistant. Edited March 27, 2015 by Don Richard Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.