NBPK402 Posted March 6, 2023 Share Posted March 6, 2023 I will be using the Ultimax 15, and a plate amp. Where do you install a plate amp...on the access door? Link to comment Share on other sites More sharing options...
NBPK402 Posted March 8, 2023 Share Posted March 8, 2023 On 9/22/2015 at 10:29 AM, CECAA850 said: MDF works well also. The plans don't show bracing but be sure you put it in. Once you put it where you want it, weight doesn't matter anyways. I am thinking of using MDF for the internals and then 1/2" plywood for the exterior, and then finish it off with 1" thick Parota wood. I figure this way I will have a nice looking sub + no leaks. Link to comment Share on other sites More sharing options...
NBPK402 Posted March 8, 2023 Share Posted March 8, 2023 On 2/17/2017 at 12:22 PM, CECAA850 said: Tapped horns get a little ragged the higher you go. A Lascala needs a horn that will play cleanly up to the point the Lascals drops off which is high due to it's short bass horn. I assume the same could be said of a MEH too, correct? Link to comment Share on other sites More sharing options...
babadono Posted March 8, 2023 Share Posted March 8, 2023 @NBPK402 I don't think you will get a response from @CECAA850 here anymore. Perhaps a PM. Maybe. Or you might get a contact on AK(audiokarma). 1 Link to comment Share on other sites More sharing options...
NBPK402 Posted March 8, 2023 Share Posted March 8, 2023 Just now, babadono said: @NBPK402 I don't think you will get a response from @CECAA850 here anymore. Perhaps a PM. Maybe. Or you might get a contact on AK(audiokarma). Thanks, that's where I am more often too, since Klipsch changed their rules. Link to comment Share on other sites More sharing options...
babadono Posted March 8, 2023 Share Posted March 8, 2023 2 minutes ago, NBPK402 said: Thanks, that's where I am more often too, since Klipsch changed their rules. Same name, different avatar picture on AK 1 Link to comment Share on other sites More sharing options...
Recommended Posts