DIY Subwoofer - lilmike's Cinema F-20 vs lilwrecker

[NBPK402]

I will be using the Ultimax 15, and a plate amp. Where do you install a plate amp...on the access door?

 

[NBPK402]

On 9/22/2015 at 10:29 AM, CECAA850 said:

 

MDF works well also.  The plans don't show bracing but be sure you put it in.  Once you put it where you want it, weight doesn't matter anyways.

I am thinking of using MDF for the internals and then 1/2" plywood for the exterior, and then finish it off with 1" thick  Parota wood. I figure this way I will have a nice looking sub + no leaks.

[NBPK402]

On 2/17/2017 at 12:22 PM, CECAA850 said:

Tapped horns get a little ragged the higher you go.  A Lascala needs a horn that will play cleanly up to the point the Lascals drops off which is high due to it's short bass horn.

I assume the same could be said of a MEH too, correct?

[babadono]

@NBPK402 I don't think you will get a response from @CECAA850 here anymore. Perhaps a PM. Maybe. Or you might get a contact on AK(audiokarma).

[NBPK402]

Just now, babadono said:

@NBPK402 I don't think you will get a response from @CECAA850 here anymore. Perhaps a PM. Maybe. Or you might get a contact on AK(audiokarma).

Thanks, that's where I am more often too, since Klipsch changed their rules.

[babadono]

2 minutes ago, NBPK402 said:

Thanks, that's where I am more often too, since Klipsch changed their rules.

Same name, different avatar picture on AK