James Logan Posted May 26, 2017 Share Posted May 26, 2017 I am upgrading Cornwall 2 cabinet with new CW-3 Components.I have the K-107-Ti, K-53-Ti, K-79-T horn and K-33-E woofer and crossover with input panel attached. Please, I am asking for detailed drawings to install CW-3 components onto new medium density MDF cabinet face. I understand that the K-33-E woofer has been moved up as well. Thanks in advance for your help. Logan Quote Link to comment Share on other sites More sharing options...
pzannucci Posted May 27, 2017 Share Posted May 27, 2017 So you only have the cabinets? To make it just like a CWIII you will need a new motor board and it is almost easier to build new cabinets with good reinforcement unless you have a set of pristine cabs. Quote Link to comment Share on other sites More sharing options...
jjptkd Posted May 27, 2017 Share Posted May 27, 2017 The mid horn for the CW-III is smaller than the one that was used in the CW-II, the easiest thing would be to find a pair of original CW-II horns and attach the CW-III drivers to them, everything else should just bolt right up. New motorboard seems like a lot of work to reduce the mid horn size and move the woofer up a little. Either way, good luck! Quote Link to comment Share on other sites More sharing options...
CECAA850 Posted May 28, 2017 Share Posted May 28, 2017 I think the woofer definitely needs to be moved. The C3 crossover is designed using the new positioning. Quote Link to comment Share on other sites More sharing options...
Schu Posted May 28, 2017 Share Posted May 28, 2017 On 5/26/2017 at 3:22 PM, James Logan said: I am upgrading Cornwall 2 cabinet with new CW-3 Components.I have the K-107-Ti, K-53-Ti, K-79-T horn and K-33-E woofer and crossover with input panel attached. Please, I am asking for detailed drawings to install CW-3 components onto new medium density MDF cabinet face. I understand that the K-33-E woofer has been moved up as well. Thanks in advance for your help. Logan What horrible idea... Quote Link to comment Share on other sites More sharing options...
MookieStl Posted May 28, 2017 Share Posted May 28, 2017 2 hours ago, Schu said: What horrible idea... I was looking for a nice way to say that, guess I don't need to now. Quote Link to comment Share on other sites More sharing options...
pzannucci Posted May 29, 2017 Share Posted May 29, 2017 18 hours ago, MookieStl said: I was looking for a nice way to say that, guess I don't need to now. I think they have the cabinets sans components. If not, I wouldn't do that to a good set of CW IIs. Quote Link to comment Share on other sites More sharing options...
James Logan Posted July 2, 2017 Author Share Posted July 2, 2017 Hello Klipsch community CORNWALL 3 COMPONENT PLACEMENT DRAWINGS I am building new cabinets for Cornwall 3 components which I have purchased Please I need detailed drawings for component placement on sound board I have: K-107-Ti, with Horn K-53 Ti with K-107 Squawker K-33-E 15" woofer And new pre-wired crossovers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.