Erukian Posted September 6, 2005 Share Posted September 6, 2005 ?<?xml version="1.0" encoding="utf-8"?>100Hz80Hz60Hz40HzOther Quote Link to comment Share on other sites More sharing options...
psg Posted September 8, 2005 Share Posted September 8, 2005 I usually run front KHorns as large and rarely small/40 Hz. The surround La Scala at 60 Hz and the center heresy at 80 Hz. What should I answer then? [] Quote Link to comment Share on other sites More sharing options...
sunburnwilly Posted September 8, 2005 Share Posted September 8, 2005 Other Quote Link to comment Share on other sites More sharing options...
thxsubwoofers Posted September 8, 2005 Share Posted September 8, 2005 I put my crossover about 80hz. Quote Link to comment Share on other sites More sharing options...
kenratboy Posted September 8, 2005 Share Posted September 8, 2005 80 Hz. for me. Sometimes I play around for music and have a 80 Hz. X-over on the subwoofer and 40 Hz. on my F3's, adds some nice bass [] Quote Link to comment Share on other sites More sharing options...
Speedball Posted September 9, 2005 Share Posted September 9, 2005 I voted # 80 With a 2.1 channel setup my svs cylinder is usually around 80 give or take 20 depending on the music. Generally for movies I crank up the gain really high and cut back on the crossover so I get those big suprising bass scenes. Quote Link to comment Share on other sites More sharing options...
nicholtl Posted September 9, 2005 Share Posted September 9, 2005 100Hz for me. I feel my SVS PB2+ is more capable of delivering upper-frequency bass than the RF-7's can. And setting the crossover to 80Hz is just too too low, and would require too much of the RF-7's. Quote Link to comment Share on other sites More sharing options...
Speedball Posted September 9, 2005 Share Posted September 9, 2005 100Hz for me. I feel my SVS PB2+ is more capable of delivering upper-frequency bass than the RF-7's can. And setting the crossover to 80Hz is just too too low, and would require too much of the RF-7's. I can hear exactly what you are talking about, time to go turn it up a couple notches......[] Quote Link to comment Share on other sites More sharing options...
VGREEN Posted September 9, 2005 Share Posted September 9, 2005 80Hz for me. Quote Link to comment Share on other sites More sharing options...
formica Posted September 10, 2005 Share Posted September 10, 2005 I usually run front KHorns as large and rarely small/40 Hz. The surround La Scala at 60 Hz and the center heresy at 80 Hz. What should I answer then? I actually run my horns as large and heresy's as small/80Hz as well... so i went for 80Hz. Many preamps (mine included) do continue to send a signal to the sub in 2.1 even if the mains are set to large. Quote Link to comment Share on other sites More sharing options...
psg Posted September 10, 2005 Share Posted September 10, 2005 100Hz for me. I feel my SVS PB2+ is more capable of delivering upper-frequency bass than the RF-7's can. And setting the crossover to 80Hz is just too too low, and would require too much of the RF-7's. Trade them for bookshelf speakers then! [6] [] Quote Link to comment Share on other sites More sharing options...
BobbyT Posted September 14, 2005 Share Posted September 14, 2005 80 and run the RF7s large Quote Link to comment Share on other sites More sharing options...
mark1101 Posted September 14, 2005 Share Posted September 14, 2005 LaScala 2 Ch System / 60 Hz. Quote Link to comment Share on other sites More sharing options...
InnovaZero Posted September 15, 2005 Share Posted September 15, 2005 My Alpine setup in my car is crossed at 80hz (high and low pass), and my Pionner CS-R700/Sunfire Sig HT setup is at 50hz. Quote Link to comment Share on other sites More sharing options...
sfogg Posted September 15, 2005 Share Posted September 15, 2005 I'd have to double check but I think the L/C/Rs are high passed at 70hz fourth order and the L/R sub is low passed forth order at 70hz too. The sides/rears are fourth order at 80 or 90hz I believe. LFE sub is run wide open. Shawn Quote Link to comment Share on other sites More sharing options...
Petrol Posted September 15, 2005 Share Posted September 15, 2005 I run my RB-35s as small & cross over @ 80Hz... my biggest bass related problem seems to be the my windows, which get to rattling & buzzing far to easy. All this from an old Klipsch SW-10. I guess my next Big $$$ mod will have to be new double pane Anderson Fibrex, LOL BTW, 100Hz for me. I feel my SVS PB2+ is more capable of delivering upper-frequency bass than the RF-7's can. And setting the crossover to 80Hz is just too too low, and would require too much of the RF-7's. Trade them for bookshelf speakers then! [6] [] I'll be willing to swap my RB-35s plus shipping cost both ways . . . Quote Link to comment Share on other sites More sharing options...
TheEAR Posted September 19, 2005 Share Posted September 19, 2005 This mean very little,each system is a little bit unique due to room acoustics and there is no such thing as an ideal crossover point.With very large mains in a largers room and a big sub,the crossover should be no higher than 40Hz ,this was there is NO way in hell anyone will know where the deepest bass comes from. With mid-sized mains 60-80Hz should be fine.And very small sats a crossover of 80Hz or more is someimes a must. My main system is crossed over at 40Hz(Dynaudio Contour 3.3 mains),my secondary Klipsch system at 60Hz(RF7's front and back). Its all about letting the mains work down and extract all the goodness without taxing them too much when demanding deep bass kicks in. Quote Link to comment Share on other sites More sharing options...
psypathic Posted September 20, 2005 Share Posted September 20, 2005 you should try custom crossovers from DEANG and ask for more bass from the RF-7. Quote Link to comment Share on other sites More sharing options...
skibum Posted October 2, 2005 Share Posted October 2, 2005 I run my RB-35`s from 80 hz up set as small. sub is rw-12 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.