willland

Maybe I didn't explain it properly. I have a pair of RF-63's that are connected as 5.1 through the receiver only and 2 channel with the external amp connected to the receivers' zone 2 rca connections and the 63's other set of binding posts. In ther words, 5.1 w/receiver and 63's, and 2 channel w/receiver(zone 2) through amp to same 63's. Bill

I know he is a relative newcomer but if you fast forward 10-15 years John Mayer would be on this list and possibly in the top 50. Not quite but possibly a reincarnation of Stevie Ray. Smooth and very controlled fingers. One with the guitar. Bill

Is my question that stupid? Please someone steer me in the right direction. Bill

Come on someone please try to help me with an answer. Bill

I have an Onkyo TX-SR705 with zone 2 connections. I want to use the zone 2 rca connections and connect to my amp and then to the other binding posts on the RF-63's. With the jumpers in place, is it possible(recommended) to have both sets of posts connected at the same time and switch from zone 1 (5.1) to zone 2 (2-channel only)? I want to use the amp for 2-channel only. When I tried this configuration once and switched to zone 2, I think it looped back and the receiver went into protection mode(switched off). Is this a crazy thing to do? If so please suggest an alternative. Thanks, Bill This post is on Tech forum also. More exposure.

I have an Onkyo TX-SR705 with zone 2 connections. I want to use the zone 2 rca connections and connect to my amp and then to the other binding posts on the RF-63's. With the jumpers in place, is it possible(recommended) to have both sets of posts connected at the same time and switch from zone 1 (5.1) to zone 2 (2-channel only)? I want to use the amp for 2-channel only. When I tried this configuration once and switched to zone 2, I think it looped back and the receiver went into protection mode(switched off). Is this a crazy thing to do? If so please suggest an alternative. Thanks, Bill

I second the motion. My Toshiba HD-A30 upconverts SD's as well or better than most BD players and definitely better than most of the SD players out there. For 75 to 125 dollars you can't beat it. An OK upconverting SD player will run you 75 to 125 dollars. By the way, it plays HD-DVD's. Dead format maybe, but the disks can still be bought online for 8 to 15 dollars. Bill

Amazon.com $513.23 free shipping, Onecall.com $519.00, Accessories4less.com 439.99 (factory reconditioned w/Onkyo warranty). If your budget will allow, step up even higher to the 805(130w,Burr-Brown DACs,dual push-pull amp,THX Ultra2). Probably the best bang for the buck out there($579.00 to $700.00). Bill

Yes the 576 with 90w is enough power to do the job. My suggestion if you have not purchased it yet, get the 705. It can be found for 425 to 525 dollars. Not much more than the 576 and with pre-outs if you want to add an external amp later for more power. Bill

Bladerunner. Amazing computer restoration. Film looks and sounds like it was made today. Buy the collectors set, watch the original then the BR. What a difference. Bill

I know this sounds simple, but tell them. If they are really your friends they will respect your wishes. If that won't work steer them toward the kitchen where most gather anyway. Food and beverages usually has a way of distracting people from other things. Let them also know that if the kids can't eat and drink in the family room neither can they(you know setting an example). If all fails, put radioactive placards on each speaker. Bill

By the way, why is anyone sitting at a computer at 5:30 pm on the 4th of July? Sun, beach, adult beverages. See ya. Bill

To answer part of your post, yes the Onkyo TX-SR705 will have no problem driving your setup. Remember Klipsch speakers are very efficient. Even 75w wouldn't struggle. If you look at my setup, I have a 705(100w) driving the RC-62(150w),RF-63's(175w) and RSX-4's(50w). I wouldn't worry about the mis-matched wattage. I bought the amp(200w) for a little extra oomph, and for a cheap price($100.00). As for as bi-amping, I'm not sure. If you feel that you just need more, buy an inexpensive used amp. I also will eventually replace the surrounds with RS-52's. Bill

I know you are saving for the house(I know all about that first hand). Just wanted to point out something that is semi-local, often times sellers are willing to be very flexible on the price when the buyer is willing to pick up so they don't have to go through the trouble of packing and shipping. That is how I bought my RF-63's. He said if he didn't have to ship he would knock another $100.00 off price($1000.00 delivered in person to my house). Bill

Hey Youthman, Here is a link for a used Carver 3 channel amp in Palm City,Fl. Just responding to you mentioning that you would like to ad an amp. Don't know how much you want to spend but the price seems reasonable. The reviews on Audioreview seem favorable. http://cls.audiogon.com/cgi-bin/cls.pl?ampsmult&1219769209 Bill

Klipsch website says that Heresy II's came in black lacquer. Bill

Found this add in Orlando Craigslist. I think it is a pair of Heresy's. Help me out, I want to jump on it. http://orlando.craigslist.org/ele/734656508.html By the way, I found it first. Thanks, Bill

If your dealer is well-informed, he would steer you away from the Synergy/Reference combo. Maybe there is a higher profit margin with the Synergy series? Bill

Buy the RF-82's and RW-12d sub but not the synergy series with reference series. If short cash flow prevents you from voice matching the whole setup, buy the RC-62($375.00-$450.00) center and wait on the rear surrounds until your budget allows. You should be able to find the RS-42's for about $400.00/pair. The left-center-right is most important in home theater(seamless flow from left to right). The synergy series C2 and (4) S2's would still cost you about $950.00. Ditch the extra surrounds for now and have an all 5.1 reference setup. Then when your budget allows and you still want 7.1, buy the rears. Bill

If you go with Thought #1, I suggest the Onkyo TX-SR805. Burr-Brown DACS and most of current a/v features available. 130w/channel and dual PUSH-PULL design amp. All for $550.00 to $650.00. Big and heavy receiver @ 49 pounds. I have the TX-SR705 and am very pleased with performance. Bill

Yes to the first part of question. No to the second part unless you need more bells and whistles than the 705 provides. Everything is relative. Spend more money on a receiver you get better amps,power supply,more b's & w's. The 705 provides a lot of bang for the buck. I personally came to the same crossroad and decided to buy a used B&K reference 4430 3 channel amp(200w). All I wanted and needed was more "clean" power to run my RF-63's and RC-62 and I got it for only $195.00. If you are happy with the 705(I love mine) then look on www.audiogon.com to find many quality amps for a fraction of what you would pay for a better quality receiver. Remember with an additional amp you will need more shelf space. Bill

I will have to agree with Youthman in his suggestion of you getting the RC-62. If you are shopping at BB/Mag*****, they now carry the 62(saw on website). For that matter they also carry the RS-52. I don't know your budget but just a suggestion. Bill

Being that you have the RS-52's on the side, why not try the RB-52's in the back. If too obtrusive on your back wall, the RSX-5's might suffice. Bill

The RC-64 is a very efficient(99dB) speaker. The Onkyo TX-SR805 has very high quality amps and power source usually only found on receivers at a much higher price point. On this and other forums many members with similar setups have chimed in and touted the capabilities of the 805. Get the RC-64, take it home, hook it up and listen. If not satisfied, buy an external amp to power the 64 or take it back and get the 62. Keep in mind, you might get the "bug" and may want to upgrade to the RF-63's or 83's, then you would already have the RC-64. Bill

As long as the jumpers are in place, you can either connect to top +/- or bottom +/- but not + from top and - from bottom. http://www.klipsch.com/media/products/owners-manuals/Ref%20IV%20man.pdf Roll to near of bottom of file and in figure 5 there is a diagram of a standard speaker connection and in figure 6 a bi-wire connection. Bill